Identifying a quick and efficient method of removing organic matter without damaging microplastic samples

Natural organic matter may confound the detection of microplastics, requiring a removal step. However, most available protocols are long and lack information on removal efficiency and polymer degradation. Thus, we have determined the digestion efficiency (%) for a pool of organic matter (algae, driftwood, feathers, fish muscle, paraffin, palm oil) for five digestion solutions, hydrogen peroxide (H2O2), hydrogen peroxide with iron catalyst (H2O2 + Fe), potassium hydroxide (KOH), nitric acid (HNO3), and sodium dodecyl sulphate (SDS), under two temperatures (room temperature at 25 °C, 50 °C) and two periods (1, 6 h). H2O2 + Fe and KOH at 50 °C for 1 h had the highest digestion efficiencies, of 65.9% and 58.3% respectively (mostly limited by driftwood and paraffin). Further testing revealed that H2O2 + Fe is more appropriate for plant material and KOH for animal tissue. Weight loss (%), Fourier transform infrared spectrometry and carbonyl index of 9 virgin and 6 weathered polymers (polyethylene, polypropylene, polystyrene, polyethylene terephthalate, polyvinyl chloride, cellulose acetate, nylon) revealed that only identification of cellulose acetate was hindered. Filters were also tested revealing that quartz and glass fibre filters are resistant to these protocols. Thus, a digestion protocol based on H2O2 + Fe or KOH at 50 °C for 1 h may be used on microplastic samples.publishe

Optical Studies in Red/NIR Persistent Luminescent Cr‐Doped Zinc Gallogermanate (ZGGO:Cr)

Zn1+xGa2‐2xGexO4 (ZGGO:Cr)‐persistent phosphor, with a molar fraction, x, of x = 0.1, doped with a 0.5% molar of chromium, was synthesised via solid‐state reaction at 1350 °C for 36 h. X‐ray diffraction measurements and Raman spectroscopy evidence a single crystalline phase corresponding to the cubic spinel structure. Room temperature (RT) photoluminescence (PL) and afterglow decay profiles were investigated using above and below bandgap excitation. In both cases, persistent PL was observed for almost 8 h, mainly originating from a Cr3+ defect, the so‐called N2 optical centre. RT PL excitation and diffuse reflectance allow identification of the best pathways of Cr3+ red/NIR emission, as well as estimation of the ZGGO bandgap energy at 4.82 eV. An in‐depth investigation of the observed luminescence at 15 K and temperature‐dependent PL under site‐selective excitation reveals the spectral complexity of the presence of several optically active Cr3+ centres in the ZGGO host that emit in almost the same spectral region. Furthermore, the temperature dependence of the R‐lines’ intensity indicates the existence of thermal populating processes between the different optical centres. Such observations well account for a wide distribution of defect trap levels available for carrier capture/release, as measured by the persistent luminescence decay, from which the carriers are released preferentially to the N2 Cr3+‐related optical centre.publishersversionpublishe

Bio-based synthesis of oxidation resistant copper nanowires using an aqueous plant extract

Copper nanowires have recently emerged as promising nanomaterials for transparent conducting electrodes applications, however, their production commonly involves the use of harmful reagents. In this study, we describe for the first time a simple and cost-effective bio-based synthesis of copper nanowires using an aqueous plant extract (Eucalyptus globulus) as the reducing/stabilizing agent and oleic acid and oleylamine as surfactants. Well-dispersed crystalline copper nanowires (λmáx = 584–613 nm) were obtained with average diameters in the nanometric range (44 and 145 nm) and lengths in the micrometric range (from 5 to dozens of micrometres) using extract concentrations between 10 and 50 mg mL−1. Moreover, the aspect ratio of these nanowires can be adjusted (from around 14–20 to 160–400) by changing the experimental conditions, namely the use of oleic acid. Phenolic compounds were found to have a key role in this bioreduction process allowing to obtain practically only nanowires (without other morphologies). Nevertheless, the use of oleic acid/oleylamine is essential to manipulate their size and aspect ratio. Most importantly, these bio-based copper nanowires were found to be resistant under storage in ethanol and when submitted to air exposure, both for 2 weeks, certainly due to the adsorption of antioxidant biomolecules (phenolic) at their surface, thus avoiding the use of other polymeric protective layers. The conductivity of the CuNWs was found to be 0.009 S cm−1. As a result, this study opens a new standpoint in this field, “closing the door” to the use of hazardous reagents and synthetic polymeric protective layers, on the production of stable copper nanowires with potential application as conductive materials.publishe

Mortality from gastrointestinal congenital anomalies at 264 hospitals in 74 low-income, middle-income, and high-income countries: a multicentre, international, prospective cohort study

Summary Background Congenital anomalies are the fifth leading cause of mortality in children younger than 5 years globally. Many gastrointestinal congenital anomalies are fatal without timely access to neonatal surgical care, but few studies have been done on these conditions in low-income and middle-income countries (LMICs). We compared outcomes of the seven most common gastrointestinal congenital anomalies in low-income, middle-income, and high-income countries globally, and identified factors associated with mortality. Methods We did a multicentre, international prospective cohort study of patients younger than 16 years, presenting to hospital for the first time with oesophageal atresia, congenital diaphragmatic hernia, intestinal atresia, gastroschisis, exomphalos, anorectal malformation, and Hirschsprung’s disease. Recruitment was of consecutive patients for a minimum of 1 month between October, 2018, and April, 2019. We collected data on patient demographics, clinical status, interventions, and outcomes using the REDCap platform. Patients were followed up for 30 days after primary intervention, or 30 days after admission if they did not receive an intervention. The primary outcome was all-cause, in-hospital mortality for all conditions combined and each condition individually, stratified by country income status. We did a complete case analysis. Findings We included 3849 patients with 3975 study conditions (560 with oesophageal atresia, 448 with congenital diaphragmatic hernia, 681 with intestinal atresia, 453 with gastroschisis, 325 with exomphalos, 991 with anorectal malformation, and 517 with Hirschsprung’s disease) from 264 hospitals (89 in high-income countries, 166 in middleincome countries, and nine in low-income countries) in 74 countries. Of the 3849 patients, 2231 (58·0%) were male. Median gestational age at birth was 38 weeks (IQR 36–39) and median bodyweight at presentation was 2·8 kg (2·3–3·3). Mortality among all patients was 37 (39·8%) of 93 in low-income countries, 583 (20·4%) of 2860 in middle-income countries, and 50 (5·6%) of 896 in high-income countries (p<0·0001 between all country income groups). Gastroschisis had the greatest difference in mortality between country income strata (nine [90·0%] of ten in lowincome countries, 97 [31·9%] of 304 in middle-income countries, and two [1·4%] of 139 in high-income countries; p≤0·0001 between all country income groups). Factors significantly associated with higher mortality for all patients combined included country income status (low-income vs high-income countries, risk ratio 2·78 [95% CI 1·88–4·11], p<0·0001; middle-income vs high-income countries, 2·11 [1·59–2·79], p<0·0001), sepsis at presentation (1·20 [1·04–1·40], p=0·016), higher American Society of Anesthesiologists (ASA) score at primary intervention (ASA 4–5 vs ASA 1–2, 1·82 [1·40–2·35], p<0·0001; ASA 3 vs ASA 1–2, 1·58, [1·30–1·92], p<0·0001]), surgical safety checklist not used (1·39 [1·02–1·90], p=0·035), and ventilation or parenteral nutrition unavailable when needed (ventilation 1·96, [1·41–2·71], p=0·0001; parenteral nutrition 1·35, [1·05–1·74], p=0·018). Administration of parenteral nutrition (0·61, [0·47–0·79], p=0·0002) and use of a peripherally inserted central catheter (0·65 [0·50–0·86], p=0·0024) or percutaneous central line (0·69 [0·48–1·00], p=0·049) were associated with lower mortality. Interpretation Unacceptable differences in mortality exist for gastrointestinal congenital anomalies between lowincome, middle-income, and high-income countries. Improving access to quality neonatal surgical care in LMICs will be vital to achieve Sustainable Development Goal 3.2 of ending preventable deaths in neonates and children younger than 5 years by 2030

Electrochemical Advanced Oxidation Processes Using Diamond Technology: A Critical Review

Re-evaluation of conventional wastewater treatment processes is of paramount importance to improve the overall quality of our aquatic environment. Electrochemical Advanced Oxidation Processes (EAOPs) are the most promising alternative methods with application in wastewater treatment facilities since in situ electrogenerated oxidant agents degrade and mineralize a wide range of water pollutants. Boron-doped diamond (BDD) technology has proven its excellency in the anodic oxidation (AO) of different pollutants. In this work, we describe the use of a systematic literature review (SLR) methodology and a bibliometric analysis tool for the assessment of a representative sample of work (hundreds of publications) concerning the synergism between AO using BDD technology and other oxidation methods. One section of the discussion relates to different techniques used to enhance the AO performance of BDD technology, namely persulfate radicals or ozone and photoelectrocatalysis, whereas the second one considers Fenton-based reactions. A standard synergism effect occurs between AO using BDD technology and the add-ons or the Fenton-based methods, resulting in the enhancement of the degradation and mineralization efficiencies. The future of EAOPs using BDD technology must include renewable energy sources to self-sustain the overall process, and further research on the subject is mandatory to enable the effective acceptance and application of such processes in wastewater remediation facilities

Electrochemical Advanced Oxidation Processes Using Diamond Technology: A Critical Review

Re-evaluation of conventional wastewater treatment processes is of paramount importance to improve the overall quality of our aquatic environment. Electrochemical Advanced Oxidation Processes (EAOPs) are the most promising alternative methods with application in wastewater treatment facilities since in situ electrogenerated oxidant agents degrade and mineralize a wide range of water pollutants. Boron-doped diamond (BDD) technology has proven its excellency in the anodic oxidation (AO) of different pollutants. In this work, we describe the use of a systematic literature review (SLR) methodology and a bibliometric analysis tool for the assessment of a representative sample of work (hundreds of publications) concerning the synergism between AO using BDD technology and other oxidation methods. One section of the discussion relates to different techniques used to enhance the AO performance of BDD technology, namely persulfate radicals or ozone and photoelectrocatalysis, whereas the second one considers Fenton-based reactions. A standard synergism effect occurs between AO using BDD technology and the add-ons or the Fenton-based methods, resulting in the enhancement of the degradation and mineralization efficiencies. The future of EAOPs using BDD technology must include renewable energy sources to self-sustain the overall process, and further research on the subject is mandatory to enable the effective acceptance and application of such processes in wastewater remediation facilities

Carbon Nanostructures-Silica Aerogel Composites for Adsorption of Organic Pollutants

Silica aerogels are a class of materials that can be tailored in terms of their final properties and surface chemistry. They can be synthesized with specific features to be used as adsorbents, resulting in improved performance for wastewater pollutants' removal. The purpose of this research was to investigate the effect of amino functionalization and the addition of carbon nanostructures to silica aerogels made from methyltrimethoxysilane (MTMS) on their removal capacities for various contaminants in aqueous solutions. The MTMS-based aerogels successfully removed various organic compounds and drugs, achieving adsorption capacities of 170 mg⋅g-1 for toluene and 200 mg⋅g-1 for xylene. For initial concentrations up to 50 mg⋅L-1, removals greater than 71% were obtained for amoxicillin, and superior to 96% for naproxen. The addition of a co-precursor containing amine groups and/or carbon nanomaterials was proven to be a valuable tool in the development of new adsorbents by altering the aerogels' properties and enhancing their adsorption capacities. Therefore, this work demonstrates the potential of these materials as an alternative to industrial sorbents due to their high and fast removal efficiency, less than 60 min for the organic compounds, towards different types of pollutants

Advances in rf glow discharge optical emission spectrometry characterization of intrinsic and boron-doped diamond coatings

Accurate determination of the effective doping range within diamond thin films is important for fine-tuning of electrical conductivity. Nevertheless, it is not easily attainable by the commonly adopted techniques. In this work, pulsed RF glow discharge optical emission spectrometry (GD-OES) combined with ultrafast sputtering (UFS) is applied for the first time to acquire elemental depth profiles of intrinsic diamond coatings and boron content bulk distribution in films. The GD-OES practical advances presented here enabled quick elemental profiling with noteworthy depth resolution and determination of the film interfaces. The erosion rates and layer thicknesses were measured using differential interferometric profiling (DIP), demonstrating a close correlation between the coating thickness and the carbon/hydrogen gas ratio. Moreover, DIP and the adopted semiquantification methodology revealed a nonhomogeneous bulk distribution of boron within the diamond crystalline structure, i.e., boron doping is both substitutional and interstitial within the diamond framework. DIP measurements also showed that effective boron doping is not linearly correlated to the increasing content introduced into the diamond coating. This is a finding well supported by X-ray diffraction (XRD) Rietveld refinement and X-ray photoelectron spectroscopy (XPS). This work demonstrates the advantage of applying advanced GD-OES operation modes due to its ease of use, affordability, accuracy, and high-speed depth profile analysis capability.publishe