29 research outputs found
Mechanical Response of He- Implanted Amorphous SiOC/ Crystalline Fe Nanolaminates
This study investigates the microstructural evolution and mechanical response of sputter-deposited amorphous silicon oxycarbide (SiOC)/crystalline Fe nanolaminates, a single layer SiOC film, and a single layer Fe film subjected to ion implantation at room temperature to obtain a maximum He concentration of 5 at. %. X-ray diffraction and transmission electron microscopy indicated no evidence of implantation-induced phase transformation or layer breakdown in the nanolaminates. Implantation resulted in the formation of He bubbles and an increase in the average size of the Fe grains in the individual Fe layers of the nanolaminates and the single layer Fe film, but the bubble density and grain size were found to be smaller in the former. By reducing the thicknesses of individual layers in the nanolaminates, bubble density and grain size were further decreased. No He bubbles were observed in the SiOC layers of the nanolaminates and the single layer SiOC film. Nanoindentation and scanning probe microscopy revealed an increase in the hardness of both single layer SiOC and Fe films after implantation. For the nanolaminates, changes in hardness were found to depend on the thicknesses of the individual layers, where reducing the layer thickness to 14 nm resulted in mitigation of implantation-induced hardening
Mechanical Response of He- Implanted Amorphous SiOC/ Crystalline Fe Nanolaminates
This study investigates the microstructural evolution and mechanical response of sputter-deposited amorphous silicon oxycarbide (SiOC)/crystalline Fe nanolaminates, a single layer SiOC film, and a single layer Fe film subjected to ion implantation at room temperature to obtain a maximum He concentration of 5 at. %. X-ray diffraction and transmission electron microscopy indicated no evidence of implantation-induced phase transformation or layer breakdown in the nanolaminates. Implantation resulted in the formation of He bubbles and an increase in the average size of the Fe grains in the individual Fe layers of the nanolaminates and the single layer Fe film, but the bubble density and grain size were found to be smaller in the former. By reducing the thicknesses of individual layers in the nanolaminates, bubble density and grain size were further decreased. No He bubbles were observed in the SiOC layers of the nanolaminates and the single layer SiOC film. Nanoindentation and scanning probe microscopy revealed an increase in the hardness of both single layer SiOC and Fe films after implantation. For the nanolaminates, changes in hardness were found to depend on the thicknesses of the individual layers, where reducing the layer thickness to 14 nm resulted in mitigation of implantation-induced hardening
Corn residue stocking rate affects cattle performance but not subsequent grain yield
This study investigated effects of stocking rate on cattle performance, quality and quantity of corn residue, and impact of residue removal on grain yield for 5 yr at the University of Nebraska – Lincoln West Central Water Resources Field Laboratory near Brule, NE. Four removal treatments—1) no removal (control), 2) grazing at 2.5 animal unit month (AUM)/ ha, 3) grazing at 5.0 AUM/ha, and 4) baling—were applied to a center pivot–irrigated corn field (53 ha). The field was divided into eight 6.6-ha paddocks to which replicated treatments were assigned. Samples of residue were collected in October and March (before and after residue removal) using ten 0.5-m2 quadrats per treatment replication. Residue was separated into 5 plant parts—stem, cob, leaf, husk, and grain—and analyzed for nutrient content. Esophageally fistulated cattle were used to measure diet quality. Cattle assigned to the 2.5 AUM/ha stocking rate treatment gained more BW (P \u3c 0.01) and BCS (P \u3c 0.01) than cattle assigned to the 5.0 AUM/ha treatment. Leaf contained the most (P \u3c 0.01) CP and husk had the greatest (P \u3c 0.01) in vitro OM disappearance (IVOMD) but the CP and IVOMD of individual plant parts did not differ (P \u3e 0.69) between sampling dates. Amount of total residue was reduced (P \u3c 0.05) by baling and both grazing treatments between October and March but was not different (P \u3e 0.05) in control paddocks between sampling dates. As a proportion of the total residue, stem increased (P \u3c 0.01) and husk decreased (P \u3c 0.01) between October and March. Diet CP content was similar (P = 0.10) between sampling dates for the 2 grazing treatments but IVOMD was greater after grazing in the 2.5 AUM/ha grazing treatment (P = 0.04). Subsequent grain yields were not different (P = 0.16) across all 4 residue removal treatments. At the proper stocking rate, corn residue grazing results in acceptable animal performance without negatively impacting subsequent corn grain production
Corn residue stocking rate affects cattle performance but not subsequent grain yield
This study investigated effects of stocking rate on cattle performance, quality and quantity of corn residue, and impact of residue removal on grain yield for 5 yr at the University of Nebraska – Lincoln West Central Water Resources Field Laboratory near Brule, NE. Four removal treatments—1) no removal (control), 2) grazing at 2.5 animal unit month (AUM)/ ha, 3) grazing at 5.0 AUM/ha, and 4) baling—were applied to a center pivot–irrigated corn field (53 ha). The field was divided into eight 6.6-ha paddocks to which replicated treatments were assigned. Samples of residue were collected in October and March (before and after residue removal) using ten 0.5-m2 quadrats per treatment replication. Residue was separated into 5 plant parts—stem, cob, leaf, husk, and grain—and analyzed for nutrient content. Esophageally fistulated cattle were used to measure diet quality. Cattle assigned to the 2.5 AUM/ha stocking rate treatment gained more BW (P \u3c 0.01) and BCS (P \u3c 0.01) than cattle assigned to the 5.0 AUM/ha treatment. Leaf contained the most (P \u3c 0.01) CP and husk had the greatest (P \u3c 0.01) in vitro OM disappearance (IVOMD) but the CP and IVOMD of individual plant parts did not differ (P \u3e 0.69) between sampling dates. Amount of total residue was reduced (P \u3c 0.05) by baling and both grazing treatments between October and March but was not different (P \u3e 0.05) in control paddocks between sampling dates. As a proportion of the total residue, stem increased (P \u3c 0.01) and husk decreased (P \u3c 0.01) between October and March. Diet CP content was similar (P = 0.10) between sampling dates for the 2 grazing treatments but IVOMD was greater after grazing in the 2.5 AUM/ha grazing treatment (P = 0.04). Subsequent grain yields were not different (P = 0.16) across all 4 residue removal treatments. At the proper stocking rate, corn residue grazing results in acceptable animal performance without negatively impacting subsequent corn grain production
Corn residue stocking rate affects cattle performance but not subsequent grain yield
This study investigated effects of stocking rate on cattle performance, quality and quantity of corn residue, and impact of residue removal on grain yield for 5 yr at the University of Nebraska – Lincoln West Central Water Resources Field Laboratory near Brule, NE. Four removal treatments—1) no removal (control), 2) grazing at 2.5 animal unit month (AUM)/ ha, 3) grazing at 5.0 AUM/ha, and 4) baling—were applied to a center pivot–irrigated corn field (53 ha). The field was divided into eight 6.6-ha paddocks to which replicated treatments were assigned. Samples of residue were collected in October and March (before and after residue removal) using ten 0.5-m2 quadrats per treatment replication. Residue was separated into 5 plant parts—stem, cob, leaf, husk, and grain—and analyzed for nutrient content. Esophageally fistulated cattle were used to measure diet quality. Cattle assigned to the 2.5 AUM/ha stocking rate treatment gained more BW (P \u3c 0.01) and BCS (P \u3c 0.01) than cattle assigned to the 5.0 AUM/ha treatment. Leaf contained the most (P \u3c 0.01) CP and husk had the greatest (P \u3c 0.01) in vitro OM disappearance (IVOMD) but the CP and IVOMD of individual plant parts did not differ (P \u3e 0.69) between sampling dates. Amount of total residue was reduced (P \u3c 0.05) by baling and both grazing treatments between October and March but was not different (P \u3e 0.05) in control paddocks between sampling dates. As a proportion of the total residue, stem increased (P \u3c 0.01) and husk decreased (P \u3c 0.01) between October and March. Diet CP content was similar (P = 0.10) between sampling dates for the 2 grazing treatments but IVOMD was greater after grazing in the 2.5 AUM/ha grazing treatment (P = 0.04). Subsequent grain yields were not different (P = 0.16) across all 4 residue removal treatments. At the proper stocking rate, corn residue grazing results in acceptable animal performance without negatively impacting subsequent corn grain production
Effect of Stocking Rate on Animal Performance and Diet Quality While Grazing Cornstalks
Four treatments were used to evaluate levels of corn residue removal on nutrient quality and cattle performance over time. Treatments included no removal of residue, stocking rates of one or two animal unit months/acre (AUM/acre), or baling. Residue samples were taken before and after grazing from all treatment paddocks to determine residue amounts, and were analyzed for OM, CP, NDF, and in vitro organic matter digestibility (IVOMD). Cattle weights and BCS scores were recorded prior to and at the conclusion of the trial. Cattle consumed husk and leaf material first, followed by cobs at a lesser rate. Husk and leaf material had greater digestibility and CP than stem or cob material. A decrease in cattle performance was observed in the 2 AUM/acre treatment group
Helium Irradiation and Implantation Effects on the Structure of Amorphous Silicon Oxycarbide
Despite recent interest in amorphous ceramics for a variety of nuclear applications, many details of their structure before and after irradiation/implantation remain unknown. Here we investigated the short-range order of amorphous silicon oxycarbide (SiOC) alloys by using the atomic pair-distribution function (PDF) obtained from electron diffraction. The PDF results show that the structure of SiOC alloys are nearly unchanged after both irradiation up to 30 dpa and He implantation up to 113 at%. TEM characterization shows no sign of crystallization, He bubble or void formation, or segregation in all irradiated samples. Irradiation results in a decreased number of Si-O bonds and an increased number of Si-C and C-O bonds. This study sheds light on the design of radiation-tolerant materials that do not experience helium swelling for advanced nuclear reactor applications
Nitrogen effects on radiation response in 12Cr ferritic/martensitic alloys
Ferritic/martensitic steels are one of the best candidates for structural materials for high dose applications in next generation nuclear reactors. The composition of structural materials must be optimized for reliable service during irradiation. This study reports the effect of interstitial nitrogen on radiation response in 12Cr ferritic/martensitic HT9 steels having a controlled nitrogen concentration. Results show that a high amount of 'free' nitrogen in the matrix stabilizes the interstitial clusters which leads to (i) larger loop sizes (ii) lower loop density and (iii) slightly reduced radiation induced hardening. It also affects diffusion mechanism of Ni and formation of Ni/Si-rich precipitates