Multidimensional Modeling of Atmospheric Effects and Surface Heterogeneities on Remote Sensing

The overall goal of this project is to establish a modeling capability that allows a quantitative determination of atmospheric effects on remote sensing including the effects of surface heterogeneities. This includes an improved understanding of aerosol and haze effects in connection with structural, angular, and spatial surface heterogeneities. One important objective of the research is the possible identification of intrinsic surface or canopy characteristics that might be invariant to atmospheric perturbations so that they could be used for scene identification. Conversely, an equally important objective is to find a correction algorithm for atmospheric effects in satellite-sensed surface reflectances. The technical approach is centered around a systematic model and code development effort based on existing, highly advanced computer codes that were originally developed for nuclear radiation shielding applications. Computational techniques for the numerical solution of the radiative transfer equation are adapted on the basis of the discrete-ordinates finite-element method which proved highly successful for one and two-dimensional radiative transfer problems with fully resolved angular representation of the radiation field

Multiple scattering of laser beams in dense hydrosols

The multiple scattering of laser beams is usually described within the framework of small-angle scattering theory. The validity of this approximation as well as improvements due to the incorporation of diffusion theory in the calculations were studied

A superconducting switch for insertion devices with variable period length

Superconducting insertion devices (IDs) are very attractive for synchrotron light sources since they offer the possibility to enhance the tuning range and functionality significantly by period length switching. Period length switching can be realized by reversing the current in a separately powered subset of the superconducting windings. So far, the first demonstration mock-up coil allowing period length tripling was fabricated and tested successfully. Here, we report on the feasibility of superconducting switches built to operate in a liquid helium bath and under conduction cooled conditions

Beam heat load analysis with COLDDIAG: a cold vacuum chamber for diagnostics

The knowledge of the heat intake from the electron beam is essential to design the cryogenic layout of superconducting insertion devices. With the aim of measuring the beam heat load to a cold bore and understanding the responsible mechanisms, a cold vacuum chamber for diagnostics (COLDDIAG) has been built. The instrumentation comprises temperature sensors, pressure gauges, mass spectrometers and retarding field analyzers, which allow to study the beam heat load and the influence of the cryosorbed gas layer. COLDDIAG was installed in the storage ring of the Diamond Light Source from September 2012 to August 2013. During this time measurements were performed for a wide range of machine conditions, employing the various measuring capabilities of the device. Here we report on the analysis of the measured beam heat load, pressure and gas content, as well as the low energy charged particle flux and spectrum as a function of the electron beam parameters

Characterization and long term operation of a novel superconducting undulator with 15 mm period length in a synchrotron light source

A new cryogen-free full scale (1.5 m long) superconducting undulator with a period length of 15 mm (SCU15) has been successfully tested in the ANKA storage ring. This represents a very important milestone in the development of superconducting undulators for third and fourth generation light sources carried on by the collaboration between the Karlsruhe Institute of Technology and the industrial partner Babcock Noell GmbH. SCU15 is the first full length device worldwide that with beam reaches a higher peak field than what expected with the same geometry (vacuum gap and period length) with an ideal cryogenic permanent magnet undulator built with the best material available PrFeB. After a summary on the design and main parameters of the device, we present here the characterization in terms of spectral properties and the long term operation of the SCU15 in the ANKA storage ring

Status of COLDDIAG: A Cold Vacuum Chamber for Diagnostics

One of the still open issues for the development of superconducting insertion devices is the understanding of the beam heat load. With the aim of measuring the beam heat load to a cold bore and the hope to gain a deeper understanding in the beam heat load mechanisms, a cold vacuum chamber for diagnostics is under construction. The following diagnostics will be implemented: i) retarding field analyzers to measure the electron energy and flux, ii) temperature sensors to measure the total heat load, iii) pressure gauges, iv) and mass spectrometers to measure the gas content. The inner vacuum chamber will be removable in order to test different geometries and materials. This will allow the installation of the cryostat in different synchrotron light sources. COLDDIAG will be built to fit in a short straight section at ANKA. A first installation at the synchrotron light source Diamond is foreseen in June 2011. Here we describe the technical design report of this device and the planned measurements with beam.Comment: Presented at First International Particle Accelerator Conference, IPAC'10, Kyoto, Japan, from 23 to 28 May 201

Evaluation of a national universal coverage campaign of long-lasting insecticidal nets in a rural district in north-west Tanzania.

\ud \ud Insecticide-treated nets (ITN) are one of the most effective measures for preventing malaria. Mass distribution campaigns are being used to rapidly increase net coverage in at-risk populations. This study had two purposes: to evaluate the impact of a universal coverage campaign (UCC) of long-lasting insecticidal nets (LLINs) on LLIN ownership and usage, and to identify factors that may be associated with inadequate coverage. In 2011 two cross-sectional household surveys were conducted in 50 clusters in Muleba district, north-west Tanzania. Prior to the UCC 3,246 households were surveyed and 2,499 afterwards. Data on bed net ownership and usage, demographics of household members and household characteristics including factors related to socio-economic status were gathered, using an adapted version of the standard Malaria Indicator Survey. Specific questions relating to the UCC process were asked. The proportion of households with at least one ITN increased from 62.6% (95% Confidence Interval (CI) = 60.9-64.2) before the UCC to 90.8% (95% CI = 89.0-92.3) afterwards. ITN usage in all residents rose from 40.8% to 55.7%. After the UCC 58.4% (95% CI = 54.7-62.1) of households had sufficient ITNs to cover all their sleeping places. Households with children under five years (OR = 2.4, 95% CI = 1.9-2.9) and small households (OR = 1.9, 95% CI = 1.5-2.4) were most likely to reach universal coverage. Poverty was not associated with net coverage. Eighty percent of households surveyed received LLINs from the campaign. The UCC in Muleba district of Tanzania was equitable, greatly improving LLIN ownership and, more moderately, usage. However, the goal of universal coverage in terms of the adequate provision of nets was not achieved. Multiple, continuous delivery systems and education activities are required to maintain and improve bed net ownership and usage.\ud \u

Status of the development of superconducting undulators at ANKA

In order to produce high-brilliance hard X-ray photon beams, permanent magnet short-period undulators are applied in many synchrotron facilities worldwide. Superconducting undulators (SCUs) have the potential to further increase the spectral range and brilliance. At the ANKA (˚ANgstrom source KArlsruhe) synchrotron radiation facility, we thus pursue an SCUfocused research and development program in a collaboration between the Karlsruhe Institute of Technology (KIT) and Babcock Noell GmbH (BNG), the status of which is reported in this contribution. The effort to develop instruments and tools for quality assessment of the magnetic field of SCUs and to enhance the understanding of beam heat load mechanisms in a cold bore is also described