Do Quasi-Hyperbolic Preferences Explain Academic Procrastination? An Empirical Evaluation

Traditional neoclassical thought fails to explain questions such as problems of self-control. Behavioural economics have explained these matters on the basis of the intertemporal preferences of individuals and, specifically, the so-called (β, δ) model which emphasises present bias. This opens the way to the analysis of new situations in which people can adopt incorrect indecisions that make it necessary for the government to intervene. The literature which has developed the (β, δ) model and its implications has generated a categorisation of people that is widely used but which lacks a systematic empirical evaluation. It is important to value the need for this public action. In this article, we develop a method which makes it possible to verify the main implications that this model has to explain the procrastination of university students. Using an experimental time discount task with real monetary incentives, we estimate the students’ β and δ parameters and we analyse their correlation with their answers to a series of questions concerning how they plan to study for an exam. The results are ambiguous given that they back some of the model’s conclusions but reject others, including a number of the most basic ones, such as the relation between present biases and some of the categories of people, these being essential to predict their behaviour

Few-Mode Transmission Technology for Ultra-High Capacity Optical Networks

Tesis por compendio[ES] En esta Tesis Doctoral, se propone diferentes técnicas de acoplo y conversión modal destinadas a aumentar la capacidad de transporte en sistemas de telecomunicaciones sobre fibra óptica. En particular, el objetivo principal es el desarrollo de la tecnología necesaria para conseguir una multiplexación modal utilizando un número limitado de modos, de manera controlada. Para ello, se estudian dos escenarios MDM con dos longitudes de onda distinta. Por un lado, usando la longitud de onda de 850 nm sobre SSMF favoreciendo la utilización de componentes ópticos y electro-ópticos de coste mucho menor que sus equivalentes en la banda C+L. Esta novedosa tecnología de transmisión permitirá una nueva generación de interconexiones ópticas de muy alta capacidad aplicable a enlaces chip-a-chip, a backplanes ópticos y también a clústeres de computación de altas prestaciones y centros de conmutación de red. Por otro lado, usando la longitud de onda de 1550 nm sobre guías ópticas basadas en SOI, es decir, Si (silicio) sobre sustrato de SiO2 (óxido de silicio) favoreciendo la utilización de dispositivos basados en tecnología integrada que ofrecen un menor tamaño, mejor repetibilidad y robustez que los dispositivos basados en fibra óptica. Para ello, se propone el uso de acopladores ópticos fusionados siendo un elemento indispensable a la hora de multiplexar y demultiplexar los distintos modos ópticos en un enlace MDM a 850 nm. Esta técnica permite multiplexar/demultiplexar los modos ópticos cuando el tipo de acoplador óptico utilizado es simétrico (DC, del inglés directional coupler), siendo necesario la utilización de un conversor de modos. También se estudia la posibilidad de convertir el modo óptico mediante la utilización de un acoplador óptico asimétrico (ADC, del inglés asymmetrical directional coupler), no siendo necesario utilizar un conversor de modos y simplificando el esquema MDM. Además, en esta tesis doctoral también se propone y evalúa el diseño de un conversor de modos mecánico basado en SSMF. Esta técnica permite obtener el primer modo de orden superior con una alta calidad y sin la necesidad de utilizar un ADC. Después de esto, se propone y evalúa la posibilidad de utilizar acopladores comerciales (diseñados a 1550 nm) a la longitud de onda de 850 nm permitiendo de esta forma reducir la necesidad de utilizar acopladores ópticos y conversores modales específicamente diseñados en dicha longitud de onda. Esta técnica reduciría los costes del sistema al necesitar un menor número de dispositivos y aprovechar los dispositivos diseñados a 1550 nm, siendo más económicos que los diseñados a 850 nm. En esta Tesis también se propone el uso de ADCs en guías strip basadas en SOI para la conversión y multiplexación de los modos ópticos desde la guia fundamental a la guia de dos modos, a la longitud de onda de 1550 nm. Para ello se estudia y demuestra experimentalmente diferentes diseños con el fin de obtener el diseño más robusto frente a las tolerancias de fabricación consiguiendo un rendimiento óptimo. Además, el uso de DCs sobre guías ridge es comúnmente utilizado y ofrece mejores prestaciones que el basado en guías strip, por ese motivo esta Tesis estudia y evalúa el uso de ADCs sobre guías ridge mediante el método de análisis de los índices efectivos de los supermodos par e impar. De esta forma se realiza una comparación entre los diseños óptimos de ambas estructuras (strip y ridge) con el objetivo de averiguar qué diseño ofrece mejores prestaciones. Por último, se propone y estudia el diseño de un acoplador grating capaz de multiplexar y demultiplexar los modos ópticos del modo fundamental y del primer orden superior desde la guia óptica a la fibra óptica y viceversa. Para ello se proponen diferentes diseños con el objetivo de conseguir un diseño más tolerante y eficiente frente a los errores por desalineamiento obteniendo un acoplo óptimo.[CA] En aquesta Tesi Doctoral, es proposen diferents tècniques d'acoblament i conversió modal destinades a augmentar la capacitat de transport en sistemes de telecomunicacions sobre fibra òptica. En particular, l'objectiu principal és el desenrotllament de la tecnologia necessària per a aconseguir una multiplexació modal utilitzant un número limitat de modes, de manera controlada. Per a això, s'estudien dos escenaris MDM amb dos longituds d'onda distinta. D'una banda, usant la longitud d'ona de 850 nm sobre SSMF afavorint la utilització de components òptics i electro-òptics de cost molt menor que els seus equivalents en la banda C+L. Aquesta nova tecnologia de transmissió permetrà una nova generació d'interconnexions òptiques de molt alta capacitat aplicable a enllaços chip-a-chip, a backplanes òptics i també a clústers de computació d'altes prestacions i centres de commutació de xarxa. D'altra banda, usant la longitud d'ona de 1550 nm sobre guies òptiques basades en SOI, és a dir, Si (silici) sobre substrat de SiO2 (òxid de silici) afavorint la utilització de dispositius basats en tecnologia integrada que ofereixen una menor grandària, millor repetibilitat i robustesa que els dispositius basats en fibra òptica. Per a això, es proposa l'ús d'acobladors òptics fusionats sent un element indispensable a l'hora de multiplexar i demultiplexar els distints modes òptics en un enllaç MDM. Aquesta tècnica permet multiplexar/demultiplexar els modes òptics quan el tipus d'acoblador òptic utilitzat és simètric (DC, de l'anglès directional coupler), sent necessari la utilització d'un convertidor de modes. També s'estudia la possibilitat de convertir el mode òptic per mitjà de la utilització d'un acoblador òptic asimètric (ADC, de l'anglès asymmetrical directional coupler), no sent necessari utilitzar un convertidor de modes i simplificant l'esquema MDM. Es mes, en aquesta tesi doctoral també es proposa i avalua el disseny d'un convertidor de modes mecànic basat en SSMF. Aquesta tècnica permet obtindre el primer mode d'orde superior amb una alta qualitat sense la necessitat d'utilitzar un ADC. Després d'açò, es proposa i avalua la possibilitat d'utilitzar acobladors comercials (dissenyats a 1550 nm) a la longitud d'ona de 850 nm permetent d'esta manera reduir la necessitat d'utilitzar acobladors òptics i convertidors modals específicament dissenyats en la dita longitud d'ona. Aquesta tècnica reduiria els costos del sistema al necessitar un menor nombre de dispositius i aprofitant els dispositius dissenyats a 1550 nm, sent més econòmics que els dissenyats a 850 nm. En aquesta Tesi també es proposa l'ús de ADCs en guies strip basades en SOI per a la conversió i multiplexació dels modes òptics des de la guia fonamental a la guia de dos modes, a la longitud d'ona de 1550 nm. Per a això s'estudia i demostra experimentalment diferents dissenys a fi de obtindré el disseny més robust enfront les toleràncies de fabricació aconseguint un rendiment òptim. A més, l'ús de DCs sobre guies ridge és comunament utilitzat i ofereix millors prestacions que el basat en guies strip, per eixe motiu aquesta Tesi estudia i avalua l'ús de ADCs sobre guies ridge per mitjà del mètode d'anàlisi dels índexs efectius dels supermodes parell i imparell. D'aquesta manera es realitza una comparació entre els dissenys òptims de les dos estructures (strip i ridge) amb l'objectiu d'esbrinar quin disseny ofereix millors prestacions. Finalment, es proposa i estudia el disseny d'un acoblador grating capaç de multiplexar i demultiplexar els modes òptics del mode fonamental i del primer orde superior des de la guia òptica a la fibra òptica i viceversa. Per a això es proposen diferents dissenys amb l'objectiu d'aconseguir un disseny més tolerant i eficient enfront dels errors per desalineament obtenint un acoblament òptim.[EN] In this Ph.D. thesis, different mode coupling and mode conversion techniques with the aim to increase the transport capacity in telecommunications systems over optical fiber are proposed. Concretely, the main aim is the development of the technology to achieve MDM using a limited controlled number of modes. Two different MDM scenarios based on two distinct wavelengths have been considered. On one hand, using the 850 nm wavelength over SSMF favors the use of optical and electro-optical devices with costs much lower than their equivalent in the C+L band. This novel transmission technology enables a new generation of very high capacity optical interconnections applicable to chip-to-chip links, to optical backplanes, and also to high-performance computing clusters and network switching centre interconnections. On the other hand, using the 1550 nm wavelength over optical waveguides based on SOI, i.e., Si (Silicon) above SiO2 substrate (silicon oxide), allows the use of integrated devices offering a less size, better repeatability and robustness in comparison with the optical fiber devices. Fused fiber couplers are proposed as key elements to (de)multiplex different fiber modes in a MDM link at 850 nm. The use of a symmetric directional coupler (DC) as a (de)multiplexer requires the use of an additional mode converter. The use of an asymmetrical directional coupler (ADC) as optical (de)multiplexer and mode converter is proposed, avoiding the necessity of an additional mode converter and simplifying the MDM scheme. Furthermore, in this Ph.D. thesis it is also proposed and evaluated the design of a mechanical mode converter at 850 nm using a SSMF. This technique permits to obtain the first high order mode with high quality and without the necessity of using an ADC. After that, it is analyzed and investigated the employment of commercial optical couplers (designed at 1550 nm) at 850 nm wavelength operation, thus avoiding the use of optical couplers and mode converters specifically designed at 850 nm wavelength. The MDM system costs are reduced as fewer devices are required and commercial components designed at 1550 nm are cheaper than the counterparts at 850 nm. In this Ph.D. thesis it is also considered the employment of ADCs over strip waveguides based on SOI technology for the conversion and multiplexing of the optical modes, from single-mode waveguide to high order mode waveguide at the 1550 nm wavelength. Thus, it has been studied and experimentally investigated different designs aimed to achieve the most robust configuration, in which the yield is less affected by the fabrication tolerances. Furthermore, the use of DCs over ridge waveguides is commonly employed and it offers better performance than strip waveguides. For this reason, the Ph.D. thesis studies and evaluates the use of ADCs with ridge waveguides by considering the effective refractive indexes of the even and odd supermodes analysis. In this way, a comparison between strip and ridge structures is done in order to find the optimum design that offer the best features. Finally, it is analyzed the design of a grating coupler capable of multiplexing and demultiplexing the fundamental and the high order mode from the waveguide to the optical fiber and vice versa. Thus, different designs are evaluated in order to achieve a design more robust and efficient to the coupling misalignments.García Rodríguez, D. (2018). Few-Mode Transmission Technology for Ultra-High Capacity Optical Networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/115938TESISCompendi

Photonic molecules for improving the optical response of macroporous silicon photonic crystals for gas sensing purposes

In this paper, we report the benefits of working with photonic molecules in macroporous silicon photonic crystals. In particular, we theoretically and experimentally demonstrate that the optical properties of a resonant peak produced by a single photonic atom of 2.6 µm wide can be sequentially improved if a second and a third cavity of the same length are introduced in the structure. As a consequence of that, the base of the peak is reduced from 500 nm to 100 nm, while its amplitude remains constant, increasing its Q-factor from its initial value of 25 up to 175. In addition, the bandgap is enlarged almost twice and the noise within it is mostly eliminated. In this study we also provide a way of reducing the amplitude of one or two peaks, depending whether we are in the two- or three-cavity case, by modifying the length of the involved photonic molecules so that the remainder can be used to measure gas by spectroscopic methods.Postprint (published version

Study of resonant modes in a 700 nm pitch macroporous silicon photonic crystal

In this study the modes produced by a defect inserted in a macroporous silicon (MP) photonic crystal (PC) have been studied theoretical and experimentally. In particular, the transmitted and reflected spectra have been analyzed for variations in the defect’s length and width. The performed simulations show that the resonant frequency is more easily adjusted for the fabricated samples by length tuning rather than width. The optimum resonance peak results when centered in the PC bandgap. The changes in the defect geometry result in small variations of the optical response of the PC. The resonance frequency is most sensitive to length variations, while the mode linewidth shows greater change with the defect width variation. Several MPS photonic crystals were fabricated by the electrochemical etching (EE) process with optical response in the range of 5.8 µm to 6.5 µm. Results of the characterization are in good agreement with simulations. Further samples were fabricated consisting of ordered modulated pores with a pitch of 700 nm. This allowed to reduce the vertical periodicity and therefore to have the optical response in the range of 4.4 µm to 4.8 µm. To our knowledge, modes working in this range of wavelengths have not been previously reported in 3-d MPS structures. Experimental results match with simulations, showing a linear relationship between the defect’s length and working frequency inside the bandgap. We demonstrate the possibility of tailoring the resonance peak in both ranges of wavelengths, where the principal absorption lines of different gases in the mid infrared are placed. This makes these structures very promising for their application to compact gas sensors.Postprint (author's final draft

Factores psicológicos en tenis. Control del estrés y su relación con los parámetros fisiológicos. Psychological factors in tennis. Control of stress and its relation with physiological parameters

El tenis es un deporte en el que se manifiestan las diversas cualidades físicas de una formamuy específica y en clara interrelación con factores técnicos, tácticos y psicológicos.Continuamente se producen acciones cognitivas con toma de decisión y diversas variacionesen el posible grado de ansiedad del jugador. Como actividad de relación con un oponente yante tareas abiertas variables, se produce una íntima y continua conexión entre nuestro mediointerno y el medio externo. Esto determina que los procesos psicológicos, hormonales, metabólicos,histológicos, biomecánicos, etc., se manifiesten de forma más o menos interrelacionaday compleja. Con el fin de aportar información sobre el comportamiento psicológico y surelación con los parámetros fisiológicos realizaremos un análisis un análisis teórico del estrésy su manifestación y control durante el juego

Long-term assessment of the effectiveness of coastal protection regulations in conserving natural habitats in Spain

Spain has undergone rapid socioeconomic development in the past three decades. This has been linked to massive residential and infrastructural development based on a short-term, profitable and resource-intensive consuming model. As a result, large amounts of agricultural, natural and semi-natural soils have been lost to artificial areas, especially around main cities and on the coast. In this study, we assessed the effectiveness of the Spanish Shores Act at preventing land development in two biogeographical regions and three administrative scales between 1988 and 2020 using a BACI design and remote sensing data. We also analysed the combined effect of other regulations to prevent land development on the coast. The Shores Act was effective in reducing land development although moderate to substantial land development occurred in the zones affected by the Law, especially in the Mediterranean region. Adding other sectoral regulations to the Shores Act notably and consistently reduced land development across regions. Among them, cumulative protected area (PA) regulations were most effective in reducing coastal land development. The use of satellite images, especially Sentinel 2A MSI data within a BACI design, proved a useful method for assessing the effectiveness of fine-scale objectives of environmental policies such as the Shores Act.Funding for open access charge: Universidad de Málaga / CBU

Cross-Products LASSO

Negative co-occurrence is a common phenomenon in many signal processing applications. In some cases the signals involved are sparse, and this information can be exploited to recover them. In this paper, we present a sparse learning approach that explicitly takes into account negative co-occurrence. This is achieved by adding a novel penalty term to the LASSO cost function based on the cross-products between the reconstruction coefficients. Although the resulting optimization problem is non-convex, we develop a new and efficient method for solving it based on successive convex approximations. Results on synthetic data, for both complete and overcomplete dictionaries, are provided to validate the proposed approach

Thermal emission of macroporous silicon chirped photonic crystals

Postprint (author's final draft

Blind analysis of atrial fibrillation electrograms: A sparsity-aware formulation

The problem of blind sparse analysis of electrogram (EGM) signals under atrial fibrillation (AF) conditions is considered in this paper. A mathematical model for the observed signals that takes into account the multiple foci typically appearing inside the heart during AF is firstly introduced. Then, a reconstruction model based on a fixed dictionary is developed and several alternatives for choosing the dictionary are discussed. In order to obtain a sparse solution, which takes into account the biological restrictions of the problem at the same time, the paper proposes using a Least Absolute Shrinkage and Selection Operator (LASSO) regularization followed by a post-processing stage that removes low amplitude coefficients violating the refractory period characteristic of cardiac cells. Finally, spectral analysis is performed on the clean activation sequence obtained from the sparse learning stage in order to estimate the number of latent foci and their frequencies. Simulations on synthetic signals and applications on real data are provided to validate the proposed approach.This work has been partly financed by the Spanish government through the CONSOLIDER-INGENIO 2010 program (COMONSENS project, ref. CSD2008-00010), as well as projects COSIMA (TEC2010-19545-C04-03), ALCIT (TEC2012 38800- C03-01), COMPREHENSION (TEC2012-38883-C02-01) and DISSECT (TEC2012-38058-C03-01)