30 research outputs found
Carbon dioxide emissions of Antarctic tourism
The increase of tourism to the Antarctic continent may entail not only local but also global environmental impacts. These latter impacts, which are mainly caused by transport, have been generally ignored. As a result, there is a lack of data on the global impacts of Antarctic tourism in terms of energy consumption and carbon dioxide emissions. This paper presents and applies a methodology for quantifying CO2 emissions, both for the Antarctic vessel fleet as a whole and per passenger (both per trip and per day). The results indicate that the average tourist trip to Antarctica results in 5.44 t of CO2 emissions per passenger, or 0.49 t per passenger and day. Approximately 70% of these emissions are attributable to cruising and 30% to flying, which highlights the global environmental relevance of local transport for this type of touris
Literature review on the potential of urban waste for the fertilization of urban agriculture: A closer look at the metropolitan area of Barcelona
Urban agriculture (UA) activities are increasing in popularity and importance due to greater food demands and reductions in agricultural land, also advocating for greater local food supply and security as well as the social and community cohesion perspective. This activity also has the potential to enhance the circularity of urban flows, repurposing nutrients from waste sources, increasing their self-sufficiency, reducing nutrient loss into the environment, and avoiding environmental cost of nutrient extraction and synthetization.The present work is aimed at defining recovery technologies outlined in the literature to obtain relevant nutrients such as N and P from waste sources in urban areas. Through literature research tools, the waste sources were defined, differentiating two main groups: (1) food, organic, biowaste and (2) wastewater. Up to 7 recovery strategies were identified for food, organic, and biowaste sources, while 11 strategies were defined for wastewater, mainly focusing on the recovery of N and P, which are applicable in UA in different forms.The potential of the recovered nutrients to cover existing and prospective UA sites was further assessed for the metropolitan area of Barcelona. Nutrient recovery from current composting and anaerobic digestion of urban sourced organic matter obtained each year in the area as well as the composting of wastewater sludge, struvite precipitation and ion exchange in wastewater effluent generated yearly in existing WWTPs were assessed. The results show that the requirements for the current and prospective UA in the area can be met 2.7 to 380.2 times for P and 1.7 to 117.5 times for N depending on the recovery strategy. While the present results are promising, current perceptions, legislation and the implementation and production costs compared to existing markets do not facilitate the application of nutrient recovery strategies, although a change is expected in the near future
Potential Key Factors, Policies, and Barriers for Rooftop Agriculture in EU Cities: Barcelona, Berlin, Bologna, and Paris
The main objective of this study is to contribute a framework and to provide an overview of potential key factors, policies, and barriers associated with the integration of rooftop urban agriculture (RUA), building on stakeholders' perspectives in four European cities (Barcelona, Berlin, Bologna, and Paris). The research was developed in two phases, namely, a workshop and a survey of stakeholders involved in RUA from the four cities. Education, environmental, research, technological innovation, food production, and social factors play an important role in implementing RUA. Productive spaces, cultural values, social cohesion, social rural-urban links, and the high cost of urban land are highlighted as factors that âpromoteâ RUA. In contrast, the cost of water and pollution are major contextual factors that constrain RUA. Policies related to food trade and urban planning are those that most limit RUA development. Major architectural and technical barriers related to the limits on building heights, historical buildings, a lack of specific building codes, building design and roof accessibility were identified. The high cost of infrastructure and policies that prohibit RUA product sales emerged as economic constraints. Major differences among the cities studied included the perceived effect of urban policies on RUA diffusion as well as the perceived relevance of economic and pollution factors. This study revealed that extensive dissemination and the development of appropriate information about RUA are needed. The creation of new regulations, as well as modifications to urban and building codes to support RUA, is also envisaged. This approach will consider a more flexible land-use policy that allows agriculture to take place in cities as well as marketing frameworks for RUA products. For future studies, it would be useful to apply the framework developed in this study to a larger sample. A study is also needed to confirm hypothetical differences between cities
The use of forest-based materials for the efficient energy of cities: Environmental and economic implications of cork as insulation material
Supplemental LED Lighting Improves Fruit Growth and Yield of Tomato Grown under the Sub-Optimal Lighting Condition of a Building Integrated Rooftop Greenhouse (i-RTG)
The metabolism of a building can be connected to a rooftop greenhouse, exchanging energy, water and CO2 flows, therefore reducing emissions and recycling cultivation inputs. However, integrating a rooftop greenhouse onto a building requires the application of stringent safety codes (e.g., fire, seismic codes), to strengthen and secure the structure with safety elements such as thick steel pillars or fireproof covering materials. These elements can shade the vegetation or reduce solar radiation entering the rooftop greenhouse. Nevertheless, application of additional LED light can help to overcome this constraint. The present study evaluated supplemental LED light application in an integrated rooftop greenhouse (i-RTG) at the ICTA-UAB research institute, located in Barcelona (Spain), for tomato cultivation (Solanum lycopersicum cv. Siranzo). The experiment explored the effects of three LED lighting treatments and a control cultivated under natural light only (CK). Applied treatments, added to natural sunlight, were: red and blue (RB), red and blue + far-red (FR) for the whole day, and red and blue + far-red at the end-of-day (EOD), each for 16 h d(-1) (8 a.m.-12 a.m.) with an intensity of 170 mu mol m(-2) s(-1). The results indicate that LED light increased the overall yield by 17% compared with CK plants. In particular, CK tomatoes were 9.3% lighter and 7.2% fewer as compared with tomatoes grown under LED treatments. Fruit ripening was also affected, with an increase of 35% red proximal fruit in LED-treated plants. In conclusion, LED light seems to positively affect the development and growth of tomatoes in building integrated agriculture in the Mediterranean area
The ecodesign and planning of sustainable neighbourhoods : the Vallbona case study (Barcelona)
Global sustainability is increasingly an issue of urban sustainability, being essential to encourage more benign trajectories of urbanisation. For this, there is need for a framework that could aid in the process of designing and redesigning (retrofitting) cities. The aim of this paper is to present and describe the methodology of urban ecodesign, which is characterized by a systematic incorporation of environmental life cycle considerations into the design of urban systems. The paper presents a case study of neighbourhood ecodesign from the city of Barcelona (Vallbona neighbourhood). This practical experience shows that the inclusion of sustainability criteria at an early stage of the design and planning of urban systems is the best strategy for environmental protection.In addition; a methodological framework is described in order to provide planners with a structured way of designing urban settlements so as to move towards sustainable urban environments.La sostenibilidad global es cada vez mĂĄs un tema de sostenibilidad urbana. Por este motivo, es necesario un marco de trabajo que pueda ayudar en el proceso de diseño y rediseño (rehabilitaciĂłn) de nuestras ciudades. El objetivo de este trabajo es presentar y describir la metodologĂa de ecodiseño adaptada a los entornos urbanos, la cual se caracteriza por la incorporaciĂłn sistemĂĄtica de las consideraciones ambientales a lo largo de su ciclo de vida. El documento presenta un caso de estudio de ecodiseño del barrio de Vallbona (Barcelona). Esta experiencia demuestra que la inclusiĂłn de criterios de sostenibilidad en las etapas iniciales de diseño y planificaciĂłn de los sistemas urbanos es la mejor estrategia para la prevenciĂłn ambiental. AdemĂĄs, se presenta un marco metodolĂłgico con el fin de proporcionar a los planificadores una forma estructurada de diseño de los asentamientos urbanos que les permita avanzar hacia entornos urbanos mĂĄs sostenibles
El pulpeo com etanol como alternativa para incrementar la competitividade de fĂĄbricas de papel mediante su desarrollo prospectivo integrado a industrias de la caña de azĂșcar
La industria de la pulpa y el papel para ondular en el contexto internacional y nacional presenta debelidades tecnolĂłgicas en su proceso que afectan negativamente al medio ambiente, esto unido a las fuertes regulaciones ambientales que se han impuesto a las industrias de processos quĂmicos obligan a los productores a buscar soluciones para hacer sus processos ambientalmente mĂĄs eficientes. El proyecto estĂĄ dirigido a lograr una tecnologĂa ambientalmente compatible y econĂłmicamente competitiva de producciĂłn de papeles para ondular, para ello se parte de los beneficios que la integraciĂłn material y energĂ©tica de los produtos derivados de la caña de azĂșcar puede lograr
Assessment of greenhouse emissions of the green bean through the static enclosure technique
: Urban green installations are extensively promoted to increase sustainable and accessible food production and simultaneously improve the environmental performance and liveability of city buildings. In addition to the multiple benefits of plant retrofitting, these installations may lead to a consistent increase in biogenic volatile organic compounds (BVOCs) in the urban environment, especially indoors. Accordingly, health concerns could limit the implementation of building-integrated agriculture. In a building-integrated rooftop greenhouse (i-RTG), throughout the whole hydroponic cycle, green bean emissions were dynamically collected in a static enclosure. Four representative BVOCs, α-pinene (monoterpene), ÎČ-caryophyllene (sesquiterpene), linalool (oxygenated monoterpene) and cis-3-hexenol (LOX derivate), were investigated in the samples collected from two equivalent sections of a static enclosure, one empty and one occupied by the i-RTG plants, to estimate the volatile emission factor (EF). Throughout the season, extremely variable BVOC levels between 0.04 and 5.36 ppb were found with occasional but not significant (P > 0.05) variations between the two sections. The highest emission rates were observed during plant vegetative development, with EFs equivalent to 78.97, 75.85 and 51.34 ng g-1 h-1 for cis-3-hexenol, α-pinene, and linalool, respectively; at plant maturity, all volatiles were either close to the LLOQ (lowest limit of quantitation) or not detected. Consistent with previous studies significant relationships (r â„ 0.92; P < 0.05) were individuated within volatiles and temperature and relative humidity of the sections. However, correlations were all negative and were mainly attributed to the relevant effect of the enclosure on the final sampling conditions. Overall, levels found were at least 15 folds lower than the given Risk and LCI values of the EU-LCI protocol for indoor environments, suggesting low BVOC exposure in the i-RTG. Statistical outcomes demonstrated the applicability of the static enclosure technique for fast BVOC emissions survey inside green retrofitted spaces. However, providing high sampling performance over entire BVOCs collection is recommended to reduce sampling error and incorrect estimation of the emissions
Potential application of pre-harvest LED interlighting to improve tomato quality and storability
Growing conditions and agronomical inputs play a key role in determining fruit qualitative and nutraceutical traits at harvest and post-harvest. The hereby presented research investigated the effects of pre-harvest supplemental LED interlighting on post-harvest quality of hydroponically grown tomatoes (Solanum lycopersicum âSiranzoâ). Three LED treatments, applied for 16 h d-1 (h 8.00â00.00), were added to natural sunlight and consisted of Red and Blue (RB), Red and Blue + Far-Red (FR), and Red and Blue + Far-Red at the end-of-day for 30 min (EOD), with an intensity of 180 ”mol m-2 s-1 for Red and Blue, plus 44 ”mol m-2 s-1 for Far-Red. A control treatment (CK), where plants were grown only with sunlight, was also considered. Fruits at red stage were selected and placed in a storage room at 13 °C in darkness. Fruit quality assessment was performed at harvest time and after one week of storage. RB and FR increased fruit firmness compared to CK, opening possible benefits toward reducing fruit losses during post-harvest handling. RB treated fruits also maintained a higher content of lycopene and ÎČ-carotene after the first week of storage. The study demonstrates that supplementary LED interlighting during greenhouse tomato cultivation may enhance storability and help preserve fruit nutritional properties during post-harvest