Electronic properties of ion-implanted yttria-stabilized zirconia

Ion implantation of iron and titanium has been applied to modify the surface properties of polycrystalline yttria-stabilized zirconia ((ZrO2)0.87(YO1.5)0.13 (YSZ)) discs in an attempt to prepare surfaces with a mixed conductivity and by this an enhanced surface oxygen exchange kinetics. Surface-sensitive spectroscopic techniques were applied to investigate the implanted layers as a function of different pretreatments such as oxidation, reduction and annealing. Depth profiles were recorded by Rutherford Backscattering Spectroscopy (RBS) and X-ray Photoelectron Spectroscopy (XPS) in combination with sputtering. Ion Scattering Spectroscopy (ISS) and XPS were used to investigate the surface composition and valency of implanted ions. Electronic properties like the band gap, the work function and the energy difference between the Fermi level and valence band edge (EF-EV) were obtained from Ultraviolet Photoelectron Spectroscopy (UPS) and Electron Energy Loss Spectroscopy (EELS). Overlayers of Fe2O3 or TiO2 are formed during oxidation of as-implanted samples. The Fe- and Ti-oxides could be reduced in hydrogen to the oxidation states Fe2+, Fe0 or Ti3+. Annealing of the samples leads to decreased surface concentrations of the implanted ions due to in-diffusion. At the surface of the annealed iron-implanted samples, Fe2+ and metallic Fe could be generated after further reduction whereas at the surface of the annealed Ti-implanted samples only Ti4+ was detectable.\u

Scanning Electron Microscope Studies on the Breakdown of Passivity of a Nickel-Chromium-Molybdenum Dental Alloy

The breakdown of passivity and localized corrosion of a Ni-20Cr-10Mo alloy was investigated. The methods employed were potentiodynamic polarization and SEM, and AES and EDX after potentiostatic polarization over a period of 20 hours in the passive and transpassive regions. The 1 μm finished as-cast specimens were polarized in aerated 0.1 M NaCl. The cyclic polarization curves revealed a critical pitting potential of 470 mv (SCE), while the protection potential was 300 mV (SCE). Using the potentiostatic polarization technique, nearly constant corrosion currents appeared, indicating that the whole surface was corroded uniformly. SEM pictures of samples, corroded at 650 mv, showed little pits under the oxide layer and a thinning down of the outer oxide layer. This lead to the opinion that the penetration as well as the adsorption mechanism determine the breakdown of passivity. EDX analysis and AES depth profiles showed an enrichment of Cr and Mo in the oxide. In contrast to oxidized samples, no second layer of Ni was found in the outer oxide region. In the transpassive region the relative amount of Cr and Mo in the oxide layer was higher than the one found in corresponding samples polarized in the passive region. The oxide thickness found was about 5 nm in the passive region (300 mV SCE) and about 250 nm in the transpassive region (650 mV SCE)

Thermal history modeling of the H chondrite parent body

The cooling histories of individual meteorites can be empirically reconstructed by using ages from different radioisotopic chronometers with distinct closure temperatures. For a group of meteorites derived from a single parent body such data permit the reconstruction of the cooling history and properties of that body. Particularly suited are H chondrites because precise radiometric ages over a wide range of closure temperatures are available. A thermal evolution model for the H chondrite parent body is constructed by using all H chondrites for which at least three different radiometric ages are available. Several key parameters determining the thermal evolution of the H chondrite parent body and the unknown burial depths of the H chondrites are varied until an optimal fit is obtained. The fit is performed by an 'evolution algorithm'. Empirical data for eight samples are used for which radiometric ages are available for at least three different closure temperatures. A set of parameters for the H chondrite parent body is found that yields excellent agreement (within error bounds) between the thermal evolution model and empirical data of six of the examined eight chondrites. The new thermal model constrains the radius and formation time of the H chondrite parent body (possibly (6) Hebe), the initial burial depths of the individual H chondrites, the average surface temperature of the body, the average initial porosity of the material the body accreted from, and the initial 60Fe content of the H chondrite parent body.Comment: 16 pages, 7 figure

Inactivation of pollen and other effects of genome-plastome incompatibility in Oenothera

A series of strains of the homozygous species Oenothera grandiflora (characterized by the genome BB and plastome III) were combined with plastome IV from O. parviflora (BC-IV) by means of appropriate crosses. An incompatibility between genome B and plastome IV is expressed in the haplo- and diplophase: (1) B-IV pollen, though normally developed, is largely inactive. The extent of the inactivation varies between different strains and shows a seasonal fluctuation as determined by seed set in outcrossing and selfing experiments. (2) In most of the strains lethality of BB-IV embryos is the rule, leading to empty seeds. This can be ameliorated by including another plastome in the zygotes and developing embryos on account of the biparental plastid transmission in Oenothera. It can best be demonstrated in crosses with a seed parent having normal green plastids of plastome IV and mutated chlorophyll deficient plastids from a different plastome in the pollen parent, leading to variegated progeny as well as a remainder of empty seeds. (3) In about one-half of the strains the BB-IV plants exhibit a temporary bleaching of the virescens type. The incompatibily between genome B and plastome IV does not support the earlier assumption that plastome IV is the ancestor of plastomes II, III, and V. Instead, a precursor plastome is postulated from which plastomes II, III, and IV are descended. While plastome I can be derived from II, only plastome V can be descended from plastome IV.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/41640/1/606_2004_Article_BF00984370.pd

Electron Beam-Induced Writing of Nanoscale Iron Wires on a Functional Metal Oxide

Electron beam-induced surface activation (EBISA) has been used to grow wires of iron on rutile TiO2(110)-(1 × 1) in ultrahigh vacuum. The wires have a width down to ∼20 nm and hence have potential utility as interconnects on this dielectric substrate. Wire formation was achieved using an electron beam from a scanning electron microscope to activate the surface, which was subsequently exposed to Fe(CO)5. On the basis of scanning tunneling microscopy and Auger electron spectroscopy measurements, the activation mechanism involves electron beam-induced surface reduction and restructuring

Investigation into Photoconductivity in Single CNF/TiO2-Dye Core–Shell Nanowire Devices

A vertically aligned carbon nanofiber array coated with anatase TiO2 (CNF/TiO2) is an attractive possible replacement for the sintered TiO2 nanoparticle network in the original dye-sensitized solar cell (DSSC) design due to the potential for improved charge transport and reduced charge recombination. Although the reported efficiency of 1.1% in these modified DSSC’s is encouraging, the limiting factors must be identified before a higher efficiency can be obtained. This work employs a single nanowire approach to investigate the charge transport in individual CNF/TiO2 core–shell nanowires with adsorbed N719 dye molecules in dark and under illumination. The results shed light on the role of charge traps and dye adsorption on the (photo) conductivity of nanocrystalline TiO2 CNF’s as related to dye-sensitized solar cell performance

Odorant binding proteins : a biotechnological tool for odour control

The application of an odorant binding protein for odour control and fragrance delayed release from a textile surface was first explored in this work. Pig OBP-1 gene was cloned and expressed in Escherichia coli , and the purified protein was biochemically characterized. The IC50 values(concentrations of competitor that caused a decay of fluorescence to half-maximal intensity) were determined for four distinct fragrances, namely, citronellol, benzyl benzoate,citronellyl valerate and ethyl valerate. The results showed a strong binding of citronellyl valerate,citronellol and benzyl benzoate to the recombinant protein, while ethyl valerate displayed weaker binding. Cationized cotton substrates were coated with porcine odorant binding protein and tested for their capacity to retain citronellol and to mask the smell of cigarette smoke. The immobilized protein delayed the release of citronellol when compared to the untreated cotton. According to a blind evaluation of 30 assessors, the smell of cigarette smoke, trapped onto the fabrics’ surface, was successfully attenuated by porcine odorant binding protein (more than 60 % identified the weakest smell intensity after protein exposure compared to β-cyclodextrin-treated and untreated cotton fabrics). This work demonstrated that porcine odorant binding protein can be an efficient solution to prevent and/orremove unpleasant odours trapped on the large surface of textiles. Its intrinsic properties make odorant binding proteins excellent candidates for controlled release systems which constitute a new application for this class of proteins.This work was co-funded by the European Social Fund through the management authority POPH and FCT. The authors Carla Silva and Teresa Matama would like to acknowledge their post-doctoral fellowships: SFRH/BPD/46515/2008 and SFRH/BPD/47555/2008, respectively

Single-nucleotide polymorphism associations with preterm delivery: a case-control replication study and meta-analysis

BackgroundThe aim of this study was to replicate single-nucleotide polymorphism (SNP) associations with preterm birth (PTB; birth at MethodsSpontaneous PTB cases and controls were selected from an existing cohort. Candidate SNPs were taken from an existing genotype panel. A systematic review was conducted for each SNP in the panel to determine suitability as a PTB candidate. Those with significant associations previously reported in Caucasians were selected for replication. Candidate SNPs were already genotyped in cases and controls and clinical data were accessed from state perinatal and cerebral palsy databases. Association analysis was conducted between each SNP and PTB, and meta-analysis was conducted if there were ≥ 3 studies in the literature. Maternal and fetal SNPs were considered as separate candidates.ResultsA cohort of 170 cases and 583 controls was formed. Eight SNPs from the original panel of genotyped SNPs were selected as PTB candidates and for replication on the basis of systematic literature review results. In our cohort, fetal factor V Leiden (FVL) was significantly associated with PTB (odds ratio (OR): 2.6, 95% confidence interval (CI): 1.31-5.17), and meta-analysis confirmed this association (OR: 2.71, 95% CI: 1.15-6.4).ConclusionReplication and meta-analysis support an increased risk of PTB in Caucasians with the fetal FVL mutation.Michael E. O’Callaghan, Alastair H. MacLennan, Gai L. McMichael, Eric A. Haan and Gustaaf A. Dekke

Bovine Polledness – An Autosomal Dominant Trait with Allelic Heterogeneity

The persistent horns are an important trait of speciation for the family Bovidae with complex morphogenesis taking place briefly after birth. The polledness is highly favourable in modern cattle breeding systems but serious animal welfare issues urge for a solution in the production of hornless cattle other than dehorning. Although the dominant inhibition of horn morphogenesis was discovered more than 70 years ago, and the causative mutation was mapped almost 20 years ago, its molecular nature remained unknown. Here, we report allelic heterogeneity of the POLLED locus. First, we mapped the POLLED locus to a ∼381-kb interval in a multi-breed case-control design. Targeted re-sequencing of an enlarged candidate interval (547 kb) in 16 sires with known POLLED genotype did not detect a common allele associated with polled status. In eight sires of Alpine and Scottish origin (four polled versus four horned), we identified a single candidate mutation, a complex 202 bp insertion-deletion event that showed perfect association to the polled phenotype in various European cattle breeds, except Holstein-Friesian. The analysis of the same candidate interval in eight Holsteins identified five candidate variants which segregate as a 260 kb haplotype also perfectly associated with the POLLED gene without recombination or interference with the 202 bp insertion-deletion. We further identified bulls which are progeny tested as homozygous polled but bearing both, 202 bp insertion-deletion and Friesian haplotype. The distribution of genotypes of the two putative POLLED alleles in large semi-random sample (1,261 animals) supports the hypothesis of two independent mutations