10,588 research outputs found
Development of a mercury electromagnetic centrifugal pump for the SNAP-8 refractory boiler development program
An electromagnetic pump, in which pressure is developed in mercury because of the interaction of the magnetic field and current which flows as a result of the voltage induced in the mercury contained in the pump duct, was developed for the SNAP-8 refractory boiler test facility. Pump performance results are presented for ten duct configurations and two stator sizes. These test results were used to design and fabricate a pump which met the SNAP-8 criteria of 530 psi developed pressure at 12,500 lb/hr. The pump operated continuously for over 13,000 hours without failure or performance degradation. Included in this report are descriptions of the experimental equipment, measurement techniques, all experimental data, and an analysis of the electrical losses in the pump
EFFECT OF CONTRACT DISCLOSURE ON PRICE: RAILROAD GRAIN CONTRACTING IN THE PLAINS
The Staggers Rail Act of 1980 granted railroads freedom to establish rates and enter into confidential contracts with grain shippers. Recent legislation (1986) required that certain contract terms be disclosed. This study shows rail rates in the Plains region commenced an upward trend after implementation of the disclosure policy. Results suggest contract disclosure and increased reliance on posted tariffs facilitated rate coordination within the oligopolistic railroad industry.Public Economics,
Deer reduce habitat quality for a woodland songbird: evidence from settlement patterns, demographic parameters, and body condition.
Understanding avian responses to ungulate-induced habitat modification is important because deer populations are increasing across much of temperate Europe and North America. Our experimental study examined whether habitat quality for Blackcaps (Sylvia atricapilla) in young woodland in eastern England was affected by deer, by comparing Blackcap behavior, abundance, and condition between paired plots (half of each pair protected from deer). The vegetation in each pair of plots was the same age. The Blackcap is an ideal model species for testing effects of deer on avian habitat quality because it is dependent on dense understory vegetation and is abundant throughout much of Europe. We compared timing of settlement, abundance, age structure (second-year vs. after-second-year), and phenotypic quality (measured as a body condition index, body mass divided by tarsus length) between experimental and control plots. We used point counts to examine Blackcap distribution, and standardized mist netting to collect demographic and biometric data. Incidence of singing Blackcaps was higher in nonbrowsed than in browsed plots, and singing males were recorded in nonbrowsed plots earlier in the season, indicating earlier and preferential territory establishment. Most Blackcaps, both males and females, were captured in vegetation prior to canopy closure (2–4 years of regrowth). Body condition was superior for male Blackcaps captured in nonbrowsed plots; for second-year males this was most marked in vegetation prior to canopy closure. We conclude that deer browsing in young woodland can alter habitat quality for understory-dependent species, with potential consequences for individual fitness and population productivity beyond the more obvious effects on population density
LOCK CONGESTION AND ITS IMPACT ON GRAIN BARGE RATES ON THE UPPER MISSISSIPPI RIVER
An anticipated increase in lock delays on the upper Mississippi River has generated concern about its future navigational efficiency. The objective of this paper is to identify selected factors affecting lock delay on the River's busiest locks and to examine the impact of lock delay on grain barge rates. Results show that lock unavailability, traffic level, and delay at nearby locks affect lock delay. Further, barge rates are affected by lock delay, however, the impact is modest.Public Economics,
Cointegration and Causality Analysis of World Vegetable Oil and Crude Oil Prices
Because of the recent soaring petroleum price and growing environmental concerns, biodiesel has become an important alternative fuel. Biodiesel is the mono alky esters made from a vegetable oil, such as soybean or rapeseed oil, or sometimes from animal fats. The escalation in world petroleum price has stimulated the demand for biodiesel, which consequently expanded the use of vegetable oils. This paper investigates the long-run interdependence between major edible oil prices and examines the dynamic relationship between vegetable and crude oil prices. The data consists of 378 weekly observations extending from the first week of January in 1999 to the fourth week of March in 2006. We apply time-series analytical mechanisms and directed acyclic graphs to four major traded edible oils prices, including soybean, sunflower, rapeseed and palm oils, along with one weighted average world crude oil price. Tentative results suggest one long-run cointegration relationship among those five oil prices. Also, the edible oil markets are well linked in contemporaneous time with the palm oil market initiating the new information; however, soybean oil price dominates the edible oil markets in the long run. The influence of crude oil price on edible oil prices is not significant over the study period.Resource /Energy Economics and Policy,
EFFECT OF PROPOSED GRAIN STANDARDS ON MARKETING COSTS OF THE U.S. SORGHUM SECTOR: AN INTERREGIONAL TRANSSHIPMENT-PLANT LOCATION MODEL
Recent legislative initiatives call for studies to evaluate costs associated with cleaning U.S. grains to meet more stringent standards. This paper reports on a study which developed a mixed-integer programming model of the U.S. sorghum sector to (1) determine the least-cost geographic location for new cleaning investment at the country, terminal and port elevator stages of the marketing system and (2) measure additional system marketing costs associated with implementing the proposed standards. Results show the least-cost cleaning location to be at country and terminal elevators in excess supply regions. Implementing the proposed standard would increase system costs about 2 percent.Grain quality, Plant location, Sorghum, Mixed-integer, Crop Production/Industries, Marketing,
Neutrino energy transport in weak decoupling and big bang nucleosynthesis
We calculate the evolution of the early universe through the epochs of weak
decoupling, weak freeze-out and big bang nucleosynthesis (BBN) by
simultaneously coupling a full strong, electromagnetic, and weak nuclear
reaction network with a multi-energy group Boltzmann neutrino energy transport
scheme. The modular structure of our code provides the ability to dissect the
relative contributions of each process responsible for evolving the dynamics of
the early universe in the absence of neutrino flavor oscillations. Such an
approach allows a detailed accounting of the evolution of the ,
, , , , energy
distribution functions alongside and self-consistently with the nuclear
reactions and entropy/heat generation and flow between the neutrino and
photon/electron/positron/baryon plasma components. This calculation reveals
nonlinear feedback in the time evolution of neutrino distribution functions and
plasma thermodynamic conditions (e.g., electron-positron pair densities), with
implications for: the phasing between scale factor and plasma temperature; the
neutron-to-proton ratio; light-element abundance histories; and the
cosmological parameter \neff. We find that our approach of following the time
development of neutrino spectral distortions and concomitant entropy production
and extraction from the plasma results in changes in the computed value of the
BBN deuterium yield. For example, for particular implementations of quantum
corrections in plasma thermodynamics, our calculations show a increase
in deuterium. These changes are potentially significant in the context of
anticipated improvements in observational and nuclear physics uncertainties.Comment: 37 pages, 12 Figures, 6 Table
Report on Design and Construction of the Axial Flow Pump Test Facility
In studies concerned with the application of pumps to underwater jet propulsion, it has been pointed out that cavitation may be avoided or suppressed by enclosing the pump (or propeller) in a suitably shaped shroud. The advantages of avoiding cavitation are clear; namely, the elimination of much noise, damage and vibration in addition to increasing the allowable speed. However, a general discussion of the various flow processes which
lead to cavitation is not yet possible. For propellers, cavitation is observed in helical trailing vortices and also on the blade surface proper, but for
other types of propulsion systems, notably pump jets, neither is the location known nor the cause completely understood. Roughly speaking, cavitation
will occur when local pressures reach the vapor pressure of the flowing liquid, however, the magnitude and location of these local underpressures depend upon the complete history of the flow as it passes through the machine.
Consequently, minimum pressures may occur in the free stream in some cases, or upon the blade surface itself in others. Thus, in order to study cavitation phenomena, it is first necessary to investigate the detailed behavior
of the flow.
Apart from cavitation and noise, there are also other problems of considerable importance in rotating axial flow machinery. Among the most prominent of these is the behavior of the fluid in the boundary layer near the
rotor and stator blade tips, and the off design performance in the region of stalled flow. These questions are of great concern in the design and application of axial flow compressors and, as long as compressibility effects
are negligible, they may be investigated just as well in water as in air. Moreover, inasmuch as the kinematic viscosity of air to that of water is thirteen to one {at atmospheric conditions), machines can be made to operate
in water at the same Reynolds numbers as in air at much reduced speeds, sizes, power consumptions and blade stresses, and as a result of these facts
the installation and operational costs are also lower than for the comparative air machine. The cost of the blading of a compressor is a major portion of the total cost of the machine and, therefore, the high expense of installing
different blade designs for research purposes prohibits extensive investigation. In 1951 the Hydrodynamics Laboratory at the California Institute of Technology developed a method of making inexpensive precision lead-alloy
blades for axial flow pump test impellers. As a result of this work, interest was expressed by personnel of the Naval Ordnance Test Station and staff members of the Institute in the application of such blade-making techniques
for air compressor and underwater propulsion research. It was estimated that blades could be made for about one-eighth of the cost per blade row of those in a research compressor currently operating at the Institute. This attractive estimate lead to the consideration of an axial flow compressor run in water as a pump at relatively low speeds so that research on cavitating and noncavitating flow could be done without prohibitive expense.
Under this contract, NOrd 9612, an axial flow pump with its enclosed circuit was constructed and preliminary tests on a single stage of blading were run
by the first week of November, 1952. It is the purpose of this report to describe the installation and show its usefulness for research
Real-time depth sectioning: Isolating the effect of stress on structure development in pressure-driven flow
Transient structure development at a specific distance from the channel wall in a pressure-driven flow is obtained from a set of real-time measurements that integrate contributions throughout the thickness of a rectangular channel. This “depth sectioning method” retains the advantages of pressure-driven flow while revealing flow-induced structures as a function of stress. The method is illustrated by applying it to isothermal shear-induced crystallization of an isotactic polypropylene using both synchrotron x-ray scattering and optical retardance. Real-time, depth-resolved information about the development of oriented precursors reveals features that cannot be extracted from ex-situ observation of the final morphology and that are obscured in the depth-averaged in-situ measurements. For example, at 137 °C and at the highest shear stress examined (65 kPa), oriented thread-like nuclei formed rapidly, saturated within the first 7 s of flow, developed significant crystalline overgrowth during flow and did not relax after cessation of shear. At lower stresses, threads formed later and increased at a slower rate. The depth sectioning method can be applied to the flow-induced structure development in diverse complex fluids, including block copolymers, colloidal systems, and liquid-crystalline polymers
Photonic band mixing in linear chains of optically coupled micro-spheres
The paper deals with optical excitations arising in a one-dimensional chain
of identical spheres due optical coupling of whispering gallery modes (WGM).
The band structure of these excitations depends significantly on the
inter-mixing between WGMs characterized by different values of angular quantum
number, . We develop a general theory of the photonic band structure of
these excitations taking these effects into account and applied it to several
cases of recent experimental interest. In the case of bands originating from
WQMs with the angular quantum number of the same parity, the calculated
dispersion laws are in good qualitative agreement with recent experiment
results. Bands resulting from hybridization of excitations resulting from
whispering gallery modes with different parity of exhibits anomalous
dispersion properties characterized by a gap in the allowed values of
\emph{wave numbers} and divergence of group velocity.Comment: RevTex, 28 pages, 7 Figure
- …