Individual variation in Achilles tendon morphology and geometry changes susceptibility to injury

The unique structure of the Achilles tendon, combining three smaller sub-tendons, enhances movement efficiency by allowing individual control from connected muscles. This requires compliant interfaces between sub-tendons, but compliance decreases with age and may account for increased injury frequency. Current understanding of sub-tendon sliding and its role in the whole Achilles tendon function is limited. Here we show changing the degree of sliding greatly affects the tendon mechanical behaviour. Our in vitro testing discovered distinct sub-tendon mechanical properties in keeping with their mechanical demands. In silico study based on measured properties, subject-specific tendon geometry, and modified sliding capacity demonstrated age-related displacement reduction similar to our in vivo ultrasonography measurements. Peak stress magnitude and distribution within the whole Achilles tendon are affected by individual tendon geometries, the sliding capacity between sub-tendons, and different muscle loading conditions. These results suggest clinical possibilities to identify patients at risk and design personalised rehabilitation protocols

Dose, exposure time, and resolution in Serial X-ray Crystallography

The resolution of X-ray diffraction microscopy is limited by the maximum dose that can be delivered prior to sample damage. In the proposed Serial Crystallography method, the damage problem is addressed by distributing the total dose over many identical hydrated macromolecules running continuously in a single-file train across a continuous X-ray beam, and resolution is then limited only by the available molecular and X-ray fluxes and molecular alignment. Orientation of the diffracting molecules is achieved by laser alignment. We evaluate the incident X-ray fluence (energy/area) required to obtain a given resolution from (1) an analytical model, giving the count rate at the maximum scattering angle for a model protein, (2) explicit simulation of diffraction patterns for a GroEL-GroES protein complex, and (3) the frequency cut off of the transfer function following iterative solution of the phase problem, and reconstruction of an electron density map in the projection approximation. These calculations include counting shot noise and multiple starts of the phasing algorithm. The results indicate counting time and the number of proteins needed within the beam at any instant for a given resolution and X-ray flux. We confirm an inverse fourth power dependence of exposure time on resolution, with important implications for all coherent X-ray imaging. We find that multiple single-file protein beams will be needed for sub-nanometer resolution on current third generation synchrotrons, but not on fourth generation designs, where reconstruction of secondary protein structure at a resolution of 0.7 nm should be possible with short exposures.Comment: 19 pages, 7 figures, 1 tabl

High frequency guided ultrasonic waves for hidden fatigue crack growth monitoring in multi-layer model aerospace structures

Especially for ageing aircraft the development of fatigue cracks at fastener holes due to stress concentration and varying loading conditions constitutes a significant maintenance problem. High frequency guided waves offer a potential compromise between the capabilities of local bulk ultrasonic measurements with proven defect detection sensitivity and the large area coverage of lower frequency guided ultrasonic waves. High frequency guided waves have energy distributed through all layers of the specimen thickness, allowing in principle hidden (2nd layer) fatigue damage monitoring. For the integration into structural health monitoring systems the sensitivity for the detection of hidden fatigue damage in inaccessible locations of the multi-layered components from a stand-off distance has to be ascertained. The multi-layered model structure investigated consists of two aluminium plate-strips with an epoxy sealant layer. During cyclic loading fatigue crack growth at a fastener hole was monitored. Specific guided wave modes (combination of fundamental A and S Lamb modes) were selectively excited above the cut-off frequencies of higher modes using a standard ultrasonic wedge transducer. Non-contact laser measurements close to the defect were performed to qualify the influence of a fatigue crack in one aluminium layer on the guided wave scattering. Fatigue crack growth monitoring using laser interferometry showed good sensitivity and repeatability for the reliable detection of small, quarter-elliptical cracks. Standard ultrasonic pulse-echo equipment was employed to monitor hidden fatigue damage from a stand-off distance without access to the damaged specimen layer. Sufficient sensitivity for the detection of fatigue cracks located in the inaccessible aluminium layer was verified, allowing in principle practical in situ ultrasonic monitoring of fatigue crack growth

Soil Contamination from PCB-Containing Buildings

BACKGROUND: Polychlorinated biphenyls (PCBs) in construction materials, such as caulking used around windows and expansion joints, may constitute a source of PCB contamination in the building interiors and in surrounding soil. Several studies of soil contamination have been conducted around buildings where the caulking has been removed by grinding or scraping. The PCBs in soil may have been generated in the process of removing the caulking, but natural weathering and deterioration of the caulking may have also been a source. OBJECTIVES: The objectives of this study were to measure PCB levels in soil surrounding buildings where PCB-containing caulk was still in place, and to evaluate the mobility of the PCBs from caulking using the Toxicity Characteristic Leaching Procedure (U.S. Environmental Protection Agency Method 1311). DISCUSSION: We found soil PCB contamination ranging from 3.3 to 34 mg/kg around buildings with undisturbed caulking that contained 10,000–36,200 mg/kg PCBs. The results of the Toxicity Characteristic Leaching Procedure (leachate concentrations of 76–288 mg PCB/L) suggest that PCBs in caulking can be mobilized, apparently as complexes with dissolved organic matter that also leach off the caulking material. CONCLUSIONS AND RECOMMENDATIONS: Although these new findings are based on a small sample size, they demonstrate the need for a national survey of PCBs in building materials and in soil surrounding these buildings. Because the buildings constructed during the time the PCB caulking was in use (1960s and 1970s) include schools, hospitals, and apartment buildings, the potential for exposure of children is a particular concern. It is necessary to reconsider the practice of disposing of old PCB caulking removed during building renovations in conventional landfills, given the apparent mobility of PCBs from the caulking material. Disposal of some caulking material in nonhazardous landfills might lead to high PCB levels in landfill leachate

One-Center Charge Transfer Transitions in Manganites

In frames of a rather conventional cluster approach, which combines the crystal field and the ligand field models we have considered different charge transfer (CT) states and O 2p-Mn 3d CT transitions in MnO$_{6}^{9-}$ octahedra. The many-electron dipole transition matrix elements were calculated using the Racah algebra for the cubic point group. Simple "local" approximation allowed to calculate the relative intensity for all dipole-allowed $\pi -\pi$ and $\sigma -\sigma$ CT transitions. We present a self-consistent description of the CT bands in insulating stoichiometric LaMn$^{3+}$O$_3$ compound with the only Mn$^{3+}$ valent state and idealized octahedral MnO$_{6}^{9-}$ centers which allows to substantially correct the current interpretation of the optical spectra. Our analysis shows the multi-band structure of the CT optical response with the weak low-energy edge at 1.7 eV, associated with forbidden $t_{1g}(\pi)-e_{g}$ transition and a series of the weak and strong dipole-allowed high-energy transitions starting from 2.5 and 4.5 eV, respectively, and extending up to nearly 11 eV. The most intensive features are associated with two strong composite bands near $4.6\div 4.7$ eV and $8\div 9$ eV, respectively, resulting from the superposition of the dipole-allowed $\sigma -\sigma$ and $\pi -\pi$ CT transitions. These predictions are in good agreement with experimental spectra. The experimental data point to a strong overscreening of the crystal field parameter $Dq$ in the CT states of MnO$_{6}^{9-}$ centers.Comment: 10 pages, 3 figure

Living with ‘melanoma’…for a day: a phenomenological analysis of medical students’ simulated experiences

Background Despite the rising incidence of melanoma, medical students have progressively fewer opportunities to encounter patients with this important condition. Curricula tend to attach the greatest value to intellectual forms of learning. Compared to intellectual learning, however, experiential learning affords students deep insights about a condition. Doctors who experience ill health are more empathic towards patients. However opportunities to learn about cancer experientially are limited. Temporary transfer tattoos can simulate the ill health associated with melanoma. We reasoned that, if doctors who have been sick are more empathic, temporarily ‘having’ melanoma might have a similar effect. Objectives Explore the impact of wearing a melanoma tattoo on medical students’ understanding of patienthood and attitudes towards patients with melanoma. Methods Ten fourth year medical students were recruited to a simulation. They wore a melanoma tattoo for 24 hours and listened to a patient’s account of receiving their diagnosis. Data were captured using audio-diaries and face-to-face interviews, transcribed, and analysed phenomenologically using the template analysis method. Results There were four themes: 1) Melanoma simulation: opening up new experiences; 2) Drawing upon past experiences; 3) A transformative introduction to patienthood; 4) Doctors in the making: seeing cancer patients in a new light. Conclusions By means of a novel simulation, medical students were introduced to lived experiences of having a melanoma. Such an inexpensive simulation can prompt students to reflect critically on the empathetic care of such patients in the future

Electronic structure investigation of CoO by means of soft X-ray scattering

The electronic structure of CoO is studied by resonant inelastic soft X-ray scattering spectroscopy using photon energies across the Co 2p absorption edges. The different spectral contributions from the energy-loss structures are identified as Raman scattering due to d-d and charge-transfer excitations. For excitation energies close to the L3 resonance, the spectral features are dominated by quartet-quartet and quartet-doublet transitions of the 3d7 configuration. At excitation energies corresponding to the satellites in the Co 2p X-ray absorption spectrum of CoO, the emission features are instead dominated by charge-transfer transitions to the 3d8L-1 final state. The spectra are interpreted and discussed with the support of simulations within the single impurity Anderson model with full multiplet effects which are found to yield consistent spectral functions to the experimental data.Comment: 8 pages, 2 figures, 2 tables, http://link.aps.org/doi/10.1103/PhysRevB.65.20510

An Unrecognized Source of PCB Contamination in Schools and Other Buildings

An investigation of 24 buildings in the Greater Boston Area revealed that one-third (8 of 24) contained caulking materials with polychlorinated biphenyl (PCB) content exceeding 50 ppm by weight, which is the U.S. Environmental Protection Agency (U.S. EPA) specified limit above which this material is considered to be PCB bulk product waste. These buildings included schools and other public buildings. In a university building where similar levels of PCB were found in caulking material, PCB levels in indoor air ranged from 111 to 393 ng/m(3); and in dust taken from the building ventilation system, < 1 ppm to 81 ppm. In this building, the U.S. EPA mandated requirements for the removal and disposal of the PCB bulk product waste as well as for confirmatory sampling to ensure that the interior and exterior of the building were decontaminated. Although U.S. EPA regulations under the Toxic Substances Control Act stipulate procedures by which PCB-contaminated materials must be handled and disposed, the regulations apparently do not require that materials such as caulking be tested to determine its PCB content. This limited investigation strongly suggests that were this testing done, many buildings would be found to contain high levels of PCBs in the building materials and potentially in the building environment. The presence of PCBs in schools is of particular concern given evidence suggesting that PCBs are developmental toxins

Analysis of the intestinal microbiota using SOLiD 16S rRNA gene sequencing and SOLiD shotgun sequencing

Background: Metagenomics seeks to understand microbial communities and assemblages by DNA sequencing. Technological advances in next generation sequencing technologies are fuelling a rapid growth in the number and scope of projects aiming to analyze complex microbial environments such as marine, soil or the gut. Recent improvements in longer read lengths and paired-sequencing allow better resolution in profiling microbial communities. While both 454 sequencing and Illumina sequencing have been used in numerous metagenomic studies, SOLiD sequencing is not commonly used in this area, as it is believed to be more suitable in the context of reference-guided projects. Results: To investigate the performance of SOLiD sequencing in a metagenomic context, we compared taxonomic profiles of SOLiD mate-pair sequencing reads with Sanger paired reads and 454 single reads. All sequences were obtained from the bacterial 16S rRNA gene, which was amplified from microbial DNA extracted from a human fecal sample. Additionally, from the same fecal sample, complete genomic microbial DNA was extracted and shotgun sequenced using SOLiD sequencing to study the composition of the intestinal microbiota and the existing microbial metabolism. We found that the microbiota composition of 16S rRNA gene sequences obtained using Sanger, 454 and SOLiD sequencing provide results comparable to the result based on shotgun sequencing. Moreover, with SOLiD sequences we obtained more resolution down to the species level. In addition, the shotgun data allowed us to determine a functional profile using the databases SEED and KEGG. Conclusions: This study shows that SOLiD mate-pair sequencing is a viable and cost-efficient option for analyzing a complex microbiome. To the best of our knowledge, this is the first time that SOLiD sequencing has been used in a human sample. Keywords: Metagenomics; Intestinal Microbiota; Next-Generation Sequencing; SOLiD Mate-Pair Sequencing; Human Fecal SamplePublished versio