Film cooling of gas turbine blades

An experimental apparatus was designed and built to study the film cooling effectiveness from a single row of holes at various angles and hole spacings, using a foreign gas technique. Mixtures of Freon 12 and air were injected into an air mainstream to give a range of density ratios encompassing the values found in a gas turbine. The density ratio was found to be of importance and none of the commonly used parameters - e.g. blowing parameters - can be used to scale results, unless the density ratio is correctly modelled. The boundary layer thickness was varied independently of other parameters, and an increase in thickness was found to decrease the effectiveness, for normal and angled injection geometries for 20 hole diameters downstream. Favourable and adverse pressure gradients over the injection holes were tested and found to have little effect on the film cooling effectiveness. Changing the hole spacing produced considerable variations, with the smallest hole spacing giving the best performance in all respects. A hole spacing of greater than 3.75 diameters was found to be the maximum to give overall coverage above 0.10 effectiveness. The injection angle was also investigated and for low blowing rates the shallow angles gave the best results; but at high blowing rates, i.e. greater than 1.4, normal injection gave the best performance as the shallow angles rapidly became detached from the surface with increasing velocity ratio. The normal injection was also superior in terms of lateral distribution of coolant at all values of blowing rate. A correlation was proposed that included the density and velocity ratios and hole spacing for normal injection and, in a modified form, for angled injection at 3 diameter spacings. This was found to work well for the experimental results obtained here and by other researchers

Film cooling of gas turbine blades

An experimental apparatus was designed and built to study the film cooling effectiveness from a single row of holes at various angles and hole spacings, using a foreign gas technique. Mixtures of Freon 12 and air were injected into an air mainstream to give a range of density ratios encompassing the values found in a gas turbine. The density ratio was found to be of importance and none of the commonly used parameters - e.g. blowing parameters - can be used to scale results, unless the density ratio is correctly modelled. The boundary layer thickness was varied independently of other parameters, and an increase in thickness was found to decrease the effectiveness, for normal and angled injection geometries for 20 hole diameters downstream. Favourable and adverse pressure gradients over the injection holes were tested and found to have little effect on the film cooling effectiveness. Changing the hole spacing produced considerable variations, with the smallest hole spacing giving the best performance in all respects. A hole spacing of greater than 3.75 diameters was found to be the maximum to give overall coverage above 0.10 effectiveness. The injection angle was also investigated and for low blowing rates the shallow angles gave the best results; but at high blowing rates, i.e. greater than 1.4, normal injection gave the best performance as the shallow angles rapidly became detached from the surface with increasing velocity ratio. The normal injection was also superior in terms of lateral distribution of coolant at all values of blowing rate. A correlation was proposed that included the density and velocity ratios and hole spacing for normal injection and, in a modified form, for angled injection at 3 diameter spacings. This was found to work well for the experimental results obtained here and by other researchers

What do young athletes implicitly understand about psychological skills?

One reason sport psychologists teach psychological skills is to enhance performance in sport; but the value of psychological skills for young athletes is questionable because of the qualitative and quantitative differences between children and adults in their understanding of abstract concepts such as mental skills. To teach these skills effectively to young athletes, sport psychologists need to appreciate what young athletes implicitly understand about such skills because maturational (e.g., cognitive, social) and environmental (e.g., coaches) factors can influence the progressive development of children and youth. In the present qualitative study, we explored young athletes’ (aged 10–15 years) understanding of four basic psychological skills: goal setting, mental imagery, self-talk, and relaxation. Young athletes (n = 118: 75 males and 43 females) completed an open-ended questionnaire to report their understanding of these four basic psychological skills. Compared with the older youth athletes, the younger youth athletes were less able to explain the meaning of each psychological skill. Goal setting and mental imagery were better understood than self-talk and relaxation. Based on these findings, sport psychologists should consider adapting interventions and psychoeducational programs to match young athletes’ age and developmental level

Cosmological evolution of interacting dark energy in Lorentz violation

The cosmological evolution of an interacting scalar field model in which the scalar field interacts with dark matter, radiation, and baryon via Lorentz violation is investigated. We propose a model of interaction through the effective coupling $\bar{\beta}$. Using dynamical system analysis, we study the linear dynamics of an interacting model and show that the dynamics of critical points are completely controlled by two parameters. Some results can be mentioned as follows. Firstly, the sequence of radiation, the dark matter, and the scalar field dark energy exist and baryons are sub dominant. Secondly, the model also allows the possibility of having a universe in the phantom phase with constant potential. Thirdly, the effective gravitational constant varies with respect to time through $\bar{\beta}$. In particular, we consider a simple case where $\bar{\beta}$ has a quadratic form and has a good agreement with the modified $\Lambda$CDM and quintessence models. Finally, we also calculate the first post--Newtonian parameters for our model.Comment: 14 pages, published versio

Cross-ancestry genome-wide association analysis of corneal thickness strengthens link between complex and Mendelian eye diseases

Central corneal thickness (CCT) is a highly heritable trait associated with complex eye diseases such as keratoconus and glaucoma. We perform a genome-wide association meta-analysis of CCT and identify 19 novel regions. In addition to adding support for known connective tissue-related pathways, pathway analyses uncover previously unreported gene sets. Remarkably, >20% of the CCT-loci are near or within Mendelian disorder genes. These included FBN1, ADAMTS2 and TGFB2 which associate with connective tissue disorders (Marfan, Ehlers-Danlos and Loeys-Dietz syndromes), and the LUM-DCN-KERA gene complex involved in myopia, corneal dystrophies and cornea plana. Using index CCT-increasing variants, we find a significant inverse correlation in effect sizes between CCT and keratoconus (r =-0.62, P = 5.30 × 10-5) but not between CCT and primary open-angle glaucoma (r =-0.17, P = 0.2). Our findings provide evidence for shared genetic influences between CCT and keratoconus, and implicate candidate genes acting in collagen and extracellular matrix regulation

Measurement of the View the tt production cross-section using eμ events with b-tagged jets in pp collisions at √s = 13 TeV with the ATLAS detector

This paper describes a measurement of the inclusive top quark pair production cross-section (σtt¯) with a data sample of 3.2 fb−1 of proton–proton collisions at a centre-of-mass energy of √s = 13 TeV, collected in 2015 by the ATLAS detector at the LHC. This measurement uses events with an opposite-charge electron–muon pair in the final state. Jets containing b-quarks are tagged using an algorithm based on track impact parameters and reconstructed secondary vertices. The numbers of events with exactly one and exactly two b-tagged jets are counted and used to determine simultaneously σtt¯ and the efficiency to reconstruct and b-tag a jet from a top quark decay, thereby minimising the associated systematic uncertainties. The cross-section is measured to be: σtt¯ = 818 ± 8 (stat) ± 27 (syst) ± 19 (lumi) ± 12 (beam) pb, where the four uncertainties arise from data statistics, experimental and theoretical systematic effects, the integrated luminosity and the LHC beam energy, giving a total relative uncertainty of 4.4%. The result is consistent with theoretical QCD calculations at next-to-next-to-leading order. A fiducial measurement corresponding to the experimental acceptance of the leptons is also presented

Search for TeV-scale gravity signatures in high-mass final states with leptons and jets with the ATLAS detector at sqrt [ s ] = 13TeV

A search for physics beyond the Standard Model, in final states with at least one high transverse momentum charged lepton (electron or muon) and two additional high transverse momentum leptons or jets, is performed using 3.2 fb−1 of proton–proton collision data recorded by the ATLAS detector at the Large Hadron Collider in 2015 at √s = 13 TeV. The upper end of the distribution of the scalar sum of the transverse momenta of leptons and jets is sensitive to the production of high-mass objects. No excess of events beyond Standard Model predictions is observed. Exclusion limits are set for models of microscopic black holes with two to six extra dimensions

The performance of the jet trigger for the ATLAS detector during 2011 data taking

The performance of the jet trigger for the ATLAS detector at the LHC during the 2011 data taking period is described. During 2011 the LHC provided proton–proton collisions with a centre-of-mass energy of 7 TeV and heavy ion collisions with a 2.76 TeV per nucleon–nucleon collision energy. The ATLAS trigger is a three level system designed to reduce the rate of events from the 40 MHz nominal maximum bunch crossing rate to the approximate 400 Hz which can be written to offline storage. The ATLAS jet trigger is the primary means for the online selection of events containing jets. Events are accepted by the trigger if they contain one or more jets above some transverse energy threshold. During 2011 data taking the jet trigger was fully efficient for jets with transverse energy above 25 GeV for triggers seeded randomly at Level 1. For triggers which require a jet to be identified at each of the three trigger levels, full efficiency is reached for offline jets with transverse energy above 60 GeV. Jets reconstructed in the final trigger level and corresponding to offline jets with transverse energy greater than 60 GeV, are reconstructed with a resolution in transverse energy with respect to offline jets, of better than 4 % in the central region and better than 2.5 % in the forward direction

Search for dark matter produced in association with a hadronically decaying vector boson in pp collisions at sqrt (s) = 13 TeV with the ATLAS detector

A search is presented for dark matter produced in association with a hadronically decaying W or Z boson using 3.2 fb−1 of pp collisions at View the MathML sources=13 TeV recorded by the ATLAS detector at the Large Hadron Collider. Events with a hadronic jet compatible with a W or Z boson and with large missing transverse momentum are analysed. The data are consistent with the Standard Model predictions and are interpreted in terms of both an effective field theory and a simplified model containing dark matter