Eigenvalue extraction in NASTRAN by the tridiagonal reduction (FEER) method: Real eigenvalue analysis

The development of the tridiagonal reduction method and its implementation in NASTRAN are described for real eigenvalue analysis as typified by structural vibration and buckling problems. This method is an automatic matrix reduction scheme whereby the eigensolutions in the neighborhood of a specified point in the eigenspectrum can be accurately extracted from a tridiagonal eigenvalue problem whose order is much lower than that of the full problem. The process is effected without orbitrary lumping of masses or other physical quantities at selected node points and thus avoids one of the basic weaknesses of other techniques

Deep space network

Background, current status, and sites of Deep Space Network stations are briefly discussed

Parameter trails

Successful communication is vital for the success of any design project. However, communication often fails, adversely affecting design process efficiency and product quality.understand the connections between different aspects of design and don–t know where to find out more information or who to talk to. This paper presents a new model, developed from current project planning techniques, which supports communication using parameter-specific data. It enables designers to question information, inform their colleagues pro-actively and assess the impact of changing parameter values on subsequent design tasks. Such interaction is critical in allowing designers to see how their own tasks fit into the overall product design

Pressure distributions obtained on a 0.04-scale and 0.02-scale model of the Space Shuttle Orbiter's forward fuselage in the Langley 20-inch Mach 6 air tunnel

Results from pressure distribution tests on 0.04-scale and 0.02-scale models of the forward fuselage of the Space Shuttle Orbier are presented without analysis. The tests were completed in the Langley 20-Inch Mach 6 Tunnel. The 0.04-scale model was tested at angles of attack from 0 to 35 and angles of sideslip from 0 to -4. The 0.02-scale model was tested at angles of attack from -10 to 45 and angles of sideslip from 0 to -4. The tests were conducted in support of the development of the Shuttle Entry Air Data System (SEADS). In addition to modeling the 20 SEADS pressure orifices, the wind-tunnel to models were also instrumented with orifices to match Development Flight Instrumentation (DFI) port locations currently existing on the Space Shuttle Orbiter Columbia (OV-102). This DFI simulation had provided a means for comparisons between reentry flight pressure data and wind-tunnel data

Pressure distributions obtained on a 0.04-scale and 0.02-scale model of the Space Shuttle Orbiter's forward fuselage in the Langley continuous flow hypersonic tunnel

Results from pressure distribution tests on 0.04-scale and 0.02-scale models of the forward fuselage of the Space Shuttle Orbiter are presented without analysis. The tests wre completed in the Langley Continuous Flow Hypersonic Tunnel (CFHT). The 0.04-scale model was tested at angles of attack from -5 deg to 45 deg and angles of sideslip from -3 deg to 3 deg. The 0.02-scale model was tested at angles of attack from -10 deg to 45 deg and angles of sideslip from -5 deg to 5 deg. The tests were conducted in support of the development of the Shuttle Entry Air Data System (SEADS). In addition to modeling the 20 SEADS pressure orifices, the wind-tunnel models were also instrumented with orifices to match Development Flight Instrumentation (DFI) port locations currently existing on the Space Shuttle Orbiter Columbia (OV-102). This DFI simulation has provided a means for comparisons between reentry flight pressure data and wind-tunnel data

Pressure distributions on a 0.04-scale model of the Space Shuttle Orbiter's forward fuselage in the Langley unitary plan wind tunnel

Pressure distribution tests on a 0.04-scale model of the forward fuselage of the Space Shuttle Orbiter are presented without analysis. The tests were completed in the Langley Unitary Plan Wind Tunnel (UPWT). The UPWT has two different test sections operating in the continuous mode. Each test section has its own Mach number range. The model was tested at angles of attack from -2.5 deg to 30 deg and angles of sideslip from -5 deg to 5 deg in both test sections. The test Reynolds number was 6.6 x 10 to the 6th power per meter. The tests were conducted in support of the development of the Shuttle Entry Air Data System (SEADS). In addition to modeling the 20 SEADS pressure orifices, the wind-tunnel model was also instrumented with orifices to match Development Flight Instrumentation (DFI) port locations currently existing on the Space Shuttle Orbiter Columbia (OV-102). This DFI simulation has provided a means for comparisons between reentry flight pressure data and wind-tunnel data

Tracking and data systems support for the Helios project. Volume 3: DSN support of Project Helios May 1976 - June 1977

Spacecraft extended mission coverage does not generally carry a high priority, but Helios was fortunate in that a combination of separated viewperiods and unique utilization of the STDN Goldstone antenna have provided a considerable amount of additional science data return, particularly at key times such a perihelion and/or solar occultation

ORAL CREATINE SUPPLEMENTATION AND SHORT-TERM DYNAMIC POWER PRODUCTION IN HEALTHY YOUNG MEN

This experiment examined the effect of creatine monohydrate supplementation on corrected peak power output and peak acceleration during repeated, high intensity sprint cycling. The investigation was randomised, placebo-controlled, double-blind and adopted a crossover design. Eight male, adult volunteers participated in this study. Subjects were administered with creatine monohydrate (0.28g.kg-1 per day) or a glucose placebo. Following experimental treatments, subjects underwent 10 maximal effort, 6-s sprints on a cycle ergometer with a work to rest ratio of 5:1. The exercise protocol was fatiguing in nature with peak power output and peak acceleration decreasing significantly from the first to last sprint. Creatine supplementation significantly attenuated the decline in peak power output in the latter stages of the intermittent sprint cycling

Tracking and data systems support for the Helios project. Volume 2: DSN support of Project Helios April 1975 - May 1976

Deep Space Network activities in the development of the Helios B mission from planning through entry of Helios 2 into first superior conjunction (end of Mission Phase II) are summarized. Network operational support activities for Helios 1 from first superior conjunction through entry into third superior conjunction are included