Relación entre la circulación atmosférica en el Atlántico Norte y las temperaturas máximas en la cuenca del Río Segura

Ponencia presentada en: II Congreso de la Asociación Española de Climatología “El tiempo del clima”, celebrado en Valencia del 7 al 9 de junio de 2001[ES]Se ha estudiado la relación entre la presión a nivel del mar (PNM) y las temperaturas máximas mensuales en la cuenca del río Segura durante los meses invernales (Diciembre, Enero y Febrero). Se han filtrado los datos originales con un análisis de componentes principales, seguidamente se ha realizado un análisis de correlación canónica para obtener los modos de variabilidad acoplados entre la escala local y la gran escala. Los resultados obtenidos a partir de las observaciones son comparados con los proporcionados por los datos de reanálisis de NCEP y las simulaciones del modelo climático de circulación general ECHAM4-0PYC3. Los resultados indican que las relaciones entre la PNM y las temperaturas máximas se mantienen en las tres escalas analizadas.[EN]The relation between sea level pressure (SLP) and monthly maximum temperatures has been studied in the Segura river basin during winter months (December, January y February). The original data have been filtered with a principal component analysis. Subsequently canonical correlation analysis has been carried out to obtain the modes of associated variability between local scale and large scale. The results obtained from the observed data are compared with the data from the NCEP reanalysis and with the simulations of the general circulation climatic model ECHAM4-0PYC3. The results show the relations between SLP and maximum temperatures are maintained in the three analyzed scales

Relación entre la estructura espacial de la isla térmica y la morfología urbana de Madrid

Ponencia presentada en: IV Congreso de la Asociación Española de Climatología "El Clima entre el Mar y la Montaña", celebrado en Santander del 2 al 5 de noviembre de 2004.[ES]En este trabajo se presenta la relación existente entre la estructura térmica y morfológica de Madrid. A partir de más de 100 transectos agrupados en tres trayectos que cubren la mayor parte de la ciudad a diversas horas del día, se ha estudiado el comportamiento más común del campo de temperaturas mediante el análisis de Componentes Principales. Por otro lado se han creado una serie de índices a partir de los datos de densidad de edificaciones y parques. Los resultados muestran que la correlación entre las Funciones Empíricas Ortogonales y los índices y combinación de ellos es muy alta indicando que la estructura espacial de la Isla Térmica puede ser obtenida fácilmente a partir de datos morfológicos urbanos. Finalmente se presenta la estructura bidimensional de la ICU madrileña como función de los parámetros morfológicos.[EN]In this work the relationship between the thermal structure and the morphology in Madrid is presented. The thermal structure has been obtained by using Principal Component analysis over more than 100 transects grouped in three differents routes covering most of Madrid Metropolitan area at several hours. On the other hand, some indices have been created as a function of density of buildings and green areas. The high correlation found between the EOFs and the indices indicates that the spatial structure of Urban Heat Island can be easily obtained from morphological urban data. Finnaly the two-dimensional UHI is presented as a function of morphological parameters

Removal of bacteria from boar semen using a low-density colloid

P. 272-278Antibiotics are added to semen extenders when preparing commercial semen doses for artificial insemination according to national and international guidelines. However, this addition of antibiotics represents non-therapeutic usage and could be contributing to the development of antibiotic resistance. Colloid centrifugation was shown to reduce the load of bacteria present in boar semen and was capable of removing all bacteria if performed directly after semen collection, albeit with some loss of spermatozoa. The present experiment was conducted with a low density colloid to investigate whether it was possible to separate all of the spermatozoa from seminal plasma i.e. without selection for robust spermatozoa, or whether this would have a detrimental effect on sperm quality. Ejaculates from nine boars were extended in Beltsville Thawing Solution without antibiotics and were transported to the laboratory for Single Layer Centrifugation (SLC) on modified Porcicoll i.e. at a low density (S). A further modification was that a sterile inner tube was included inside some of the 50 mL centrifuge tubes to facilitate harvesting of the sperm pellet (M). Aliquots of all samples (control, S and M) were cultured for bacterial quantification and identification using standard microbiological methods. Sperm quality was evaluated daily. Three of the C and M samples and five of the S samples did not contain any bacteria. Mean bacterial counts for the remaining samples (colony forming units/mL) were as follows: C 259 ± 216; S 30 ± 22; M 33 ± 15 (P < 0.01). Citrobacter spp., Staphylococcus simulans, Klebsiella variicola, Escherichia coli, Myroides odoratimimus, Proteus spp. and Enterococcus faecalis were identified in the control samples. There were marginal differences in sperm quality among treatments, with sperm velocity and linearity being higher in S and M samples than in C at all time points. However, sperm viability, capacitation and acrosome status were marginally better in controls than in S or M on day 0, but these differences disappeared during storage. Conclusions: centrifugation through a low density colloid can remove or reduce bacterial contamination in boar ejaculates without using antibiotics. Furthermore, it is possible to collect boar ejaculates without bacterial contamination by paying strict attention to hygiene.S

Biomechanical Consequences of the Elastic Properties of Dental Implant Alloys on the Supporting Bone: Finite Element Analysis

The objective of the present study is to evaluate how the elastic properties of the fabrication material of dental implants influence peri-implant bone load transfer in terms of the magnitude and distribution of stress and deformation. A three-dimensional (3D) finite element analysis was performed; the model used was a section of mandibular bone with a single implant containing a cemented ceramic-metal crown on a titanium abutment. The following three alloys were compared: rigid (Y-TZP), conventional (Ti-6Al-4V), and hyperelastic (Ti-Nb-Zr). A 150-N static load was tested on the central fossa at 6° relative to the axial axis of the implant. The results showed no differences in the distribution of stress and deformation of the bone for any of the three types of alloys studied, mainly being concentrated at the peri-implant cortical layer. However, there were differences found in the magnitude of the stress transferred to the supporting bone, with the most rigid alloy (Y-TZP) transferring the least stress and deformation to cortical bone. We conclude that there is an effect of the fabrication material of dental implants on the magnitude of the stress and deformation transferred to peri-implant bone

Decision making impairment: A shared vulnerability in obesity, gambling disorder and substance use disorders?

Introduction: Addictions are associated with decision making impairments. The present study explores decision making in Substance use disorder (SUD), Gambling disorder (GD) and Obesity (OB) when assessed by Iowa Gambling Task (IGT) and compares them with healthy controls (HC). Methods: For the aims of this study, 591 participants (194 HC, 178 GD, 113 OB, 106 SUD) were assessed according to DSM criteria, completed a sociodemographic interview and conducted the IGT. Results: SUD, GD and OB present impaired decision making when compared to the HC in the overall task and task learning, however no differences are found for the overall performance in the IGT among the clinical groups. Results also reveal some specific learning across the task patterns within the clinical groups: OB maintains negative scores until the third set where learning starts but with a less extend to HC, SUD presents an early learning followed by a progressive although slow improvement and GD presents more random choices with no learning. Conclusions: Decision making impairments are present in the studied clinical samples and they display individual differences in the task learning. Results can help understanding the underlying mechanisms of OB and addiction behaviors as well as improve current clinical treatments

Digging deeper into colonial palaeontological practices in modern day Mexico and Brazil

Scientific practices stemming from colonialism, whereby middle- and low-income countries supply data for high-income countries and the contributions of local expertise are devalued, are still prevalent today in the field of palaeontology. In response to these unjust practices, countries such as Mexico and Brazil adopted protective laws and regulations during the twentieth century to preserve their palaeontological heritage. However, scientific colonialism is still reflected in many publications describing fossil specimens recovered from these countries. Here, we present examples of ‘palaeontological colonialism’ from publications on Jurassic–Cretaceous fossils from NE Mexico and NE Brazil spanning the last three decades. Common issues that we identified in these publications are the absence of both fieldwork and export permit declarations and the lack of local experts among authorships. In Mexico, access to many fossil specimens is restricted on account of these specimens being housed in private collections, whereas a high number of studies on Brazilian fossils are based on specimens illegally reposited in foreign collections, particularly in Germany and Japan. Finally, we outline and discuss the wider academic and social impacts of these research practices, and propose exhaustive recommendations to scientists, journals, museums, research institutions and government and funding agencies in order to overcome these practices

Revisiting the Crystal Structure of BaCe0.4Zr0.4Y0.2O3-δ Proton Conducting Perovskite and Its Correlation with Transport Properties

Oxides with proton conductivity have a great potential for applications in environmental energy technology. Despite the BaCe0.4Zr0.4Y0.2O3-δ (BCZY) perovskites being well-known proton conductors, it is a challenge to determine the optimal operating temperature range where the energy applications benefit most from this unique property. The protonic transport properties strongly depend on crystal structure and local distortions in the participating cation coordination sphere, according to related temperatures and gas feed. The transport and crystallographic properties of BCZY were simultaneously studied by impedance spectroscopy (IS) and synchrotron X-ray diffraction (S-XRD). A strong correlation between conductivity and the lattice parameter, corresponding in principle to a cubic symmetry, was observed, mainly between 400 and 700 °C. The protonic conductivity range was analyzed by the H/D isotopic effect on the impedance spectra, which helped to identify protonic conduction as the governing transport mechanism below 600 °C, while the transport via oxygen vacancies dominates above this temperature. In order to assess the real crystallographic structure, the simultaneous refinement of laboratory XRD and neutron diffraction (ND) patterns was performed. According to this, BCZY changes from rhombohedral symmetry below 400 °C to cubic at 600 °C in a second-order phase transition. Complementary quasielastic neutron scattering (QENS) enables us to determine a protonic jump length of 3.1 Å, which matches the O-O distances in the octahedral oxygen coordination sphere around the cations. These results support the protonic self-diffusion through proton hopping between intraoctahedral O sites as the main transport mechanism up to 600 °C.Fil: Basbus, Juan Felipe. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche | Comisión Nacional de Energía Atómica. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche; ArgentinaFil: Arce, Mauricio Damián. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche | Comisión Nacional de Energía Atómica. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche; ArgentinaFil: Napolitano, Federico Ricardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche | Comisión Nacional de Energía Atómica. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche; ArgentinaFil: Troiani, Horacio Esteban. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche | Comisión Nacional de Energía Atómica. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche; ArgentinaFil: Alonso, José Antonio. Instituto de Ciencia de Materiales de Madrid; EspañaFil: Saleta, Martin Eduardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche | Comisión Nacional de Energía Atómica. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche; Argentina. Centro Nacional de Pesquisa em Energia e Materiais; BrasilFil: González, Miguel A.. Institut Laue Langevin; FranciaFil: Cuello, Gabriel Julio. Institut Laue Langevin; FranciaFil: Fernández Díaz, María Teresa. Institut Laue Langevin; FranciaFil: Pardo Sainz, Miguel. Universidad de Zaragoza. Instituto de Ciencias de Materiales de Aragon; EspañaFil: Bonanos, Nikolaos. Technical University of Denmark; DinamarcaFil: Jimenez, Catalina Elena. Helmholtz-Zentrum; AlemaniaFil: Giebeler, Lars. No especifíca;Fil: Figueroa, Santiago J. A.. Centro Nacional de Pesquisa em Energia e Materiais; BrasilFil: Caneiro, Alberto. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche | Comisión Nacional de Energía Atómica. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche; ArgentinaFil: Serquis, Adriana Cristina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche | Comisión Nacional de Energía Atómica. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche; ArgentinaFil: Mogni, Liliana Verónica. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche | Comisión Nacional de Energía Atómica. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche; Argentin

Clinical Validation of a 3-Dimensional Ultrafast Cardiac Magnetic Resonance Protocol Including Single Breath-Hold 3-Dimensional Sequences

Objectives: This study sought to clinically validate a novel 3-dimensional (3D) ultrafast cardiac magnetic resonance (CMR) protocol including cine (anatomy and function) and late gadolinium enhancement (LGE), each in a single breath-hold. Background: CMR is the reference tool for cardiac imaging but is time-consuming. Methods: A protocol comprising isotropic 3D cine (Enhanced sensitivity encoding [SENSE] by Static Outer volume Subtraction [ESSOS]) and isotropic 3D LGE sequences was compared with a standard cine&#43;LGE protocol in a prospective study of 107 patients (age 58 ± 11 years; 24% female). Left ventricular (LV) mass, volumes, and LV and right ventricular (RV) ejection fraction (LVEF, RVEF) were assessed by 3D ESSOS and 2D cine CMR. LGE (% LV) was assessed using 3D and 2D sequences. Results: Three-dimensional and LGE acquisitions lasted 24 and 22 s, respectively. Three-dimensional and LGE images were of good quality and allowed quantification in all cases. Mean LVEF by 3D and 2D CMR were 51 ± 12% and 52 ± 12%, respectively, with excellent intermethod agreement (intraclass correlation coefficient [ICC]: 0.96; 95% confidence interval [CI]: 0.94 to 0.97) and insignificant bias. Mean RVEF 3D and 2D CMR were 60.4 ± 5.4% and 59.7 ± 5.2%, respectively, with acceptable intermethod agreement (ICC: 0.73; 95% CI: 0.63 to 0.81) and insignificant bias. Both 2D and 3D LGE showed excellent agreement, and intraobserver and interobserver agreement were excellent for 3D LGE. Conclusions: ESSOS single breath-hold 3D CMR allows accurate assessment of heart anatomy and function. Combining ESSOS with 3D LGE allows complete cardiac examination in less than 1 min of acquisition time. This protocol expands the indication for CMR, reduces costs, and increases patient comfort. (J Am Coll Cardiol Img 2021;14:1742–1754)Funding included Instituto de Salud Carlos III (ISCIII) and the European Regional Development Fund (ERDF) Grants DTS17/00136 to Dr. Ibáñez and PI19/01704 to Dr. Fernandez-Jimenez; Spanish Society of Cardiology Translational Research Grant 2016 to Dr. Ibáñez; European Research Council ERC-CoG 819775-MATRIX to Dr. Ibáñez; Comunidad de Madrid S2017/BMD-3867-RENIM-CM to Drs. Desco and Ibáñez; and Ministerio de Ciencia e Innovación (MICINN) RETOS2019-107332RB-I00 to Dr. Ibáñez. Dr. Fernandez-Jimenez received funding from the European Union Horizon 2020 research and innovation programme under Marie Sklodowska-Curie Hrant Agreement No. 707642. The CNIC is supported by the ISCIII, the MICINN, and the Pro CNIC Foundation. Drs. Fernandez-Jimenez, Nothnagel, Fuster, Ibáñez, and Javier Sánchez-González are inventors of a joint patent (Philips/CNIC) for the new cine imaging method here described and validated/protected under the IP #2014P00960EP. Drs. Nothnagel, Kouwenhoven, Clemence, and Javier Sánchez-González are Philips employees. All other authors have reported that they have no relationships relevant to the contents of this paper to disclose

Biomechanical Consequences of the Elastic Properties of Dental Implant Alloys on the Supporting Bone: Finite Element Analysis

The objective of the present study is to evaluate how the elastic properties of the fabrication material of dental implants influence peri-implant bone load transfer in terms of the magnitude and distribution of stress and deformation. A three-dimensional (3D) finite element analysis was performed; the model used was a section of mandibular bone with a single implant containing a cemented ceramic-metal crown on a titanium abutment. The following three alloys were compared: rigid (Y-TZP), conventional (Ti-6Al-4V), and hyperelastic (Ti-Nb-Zr). A 150-N static load was tested on the central fossa at 6° relative to the axial axis of the implant. The results showed no differences in the distribution of stress and deformation of the bone for any of the three types of alloys studied, mainly being concentrated at the peri-implant cortical layer. However, there were differences found in the magnitude of the stress transferred to the supporting bone, with the most rigid alloy (Y-TZP) transferring the least stress and deformation to cortical bone. We conclude that there is an effect of the fabrication material of dental implants on the magnitude of the stress and deformation transferred to peri-implant bone

Treatment variability and its relationships to outcomes among patients with Wernicke's encephalopathy: A multicenter retrospective study

Background: Despite guidelines and recommendations, Wernicke's encephalopathy (WE) treatment lacks evidence, leading to clinical practice variability.Aims: Given the overall lack of information on thiamine use for WE treatment, we analyzed data from a large, well-characterized multicenter sample of patients with WE, examining thiamine dosages; factors associated with the use of different doses, frequencies, and routes; and the influence of differences in thiamine treatment on the outcome.Methods: This retrospective study was conducted with data from 443 patients from 21 centers obtained from a nationwide registry of the Spanish Society of Internal Medicine (from 2000 to 2012). Discharge codes and Caine criteria were applied for WE diagnosis, and treatment-related (thiamine dosage, frequency, and route of administration) demographic, clinical, and outcome variables were analyzed.Results: We found marked variability in WE treatment and a low rate of high-dose intravenous thiamine administration. Seventy-eight patients out of 373 (20.9%) received > 300 mg/day of thiamine as initial dose. Patients fulfilling the Caine criteria or presenting with the classic WE triad more frequently received parenteral treatment. Delayed diagnosis (after 24 h hospitalization), the fulfillment of more than two Caine criteria at diagnosis, mental status alterations, and folic acid deficiency were associated significantly with the lack of complete recovery. Malnutrition, reduced consciousness, folic acid deficiency, and the lack of timely thiamine treatment were risk factors for mortality.Conclusions: Our results clearly show extreme variability in thiamine dosages and routes used in the management of WE. Measures should be implemented to ensure adherence to current guidelines and to correct potential nutritional deficits in patients with alcohol use disorders or other risk factors for WE