Optical Absorption and Raman Spectroscopy Study of the Fluorinated Double-Wall Carbon Nanotubes

Double-wall carbon nanotube (DWNT) samples have been fluorinated at room temperature with varied concentration of a fluorinating agent BrF3. Content of the products estimated from X-ray photoelectron data was equal to CF0.20 and CF0.29 in the case of deficit and excess of BrF3. Raman spectroscopy showed considerable decrease of carbon nanotube amount in the fluorinated samples. Analysis of optical absorption spectra measured for pristine and fluorinated DWNT samples revealed a selectivity of carbon nanotube fluorination. Nanotubes with large chiral angle are more inert to the fluorinating agent used

Assessment of biological value and safety of food in the diet developing for tourism and recreational activities

The qualitative composition of food for people leading an active life, should be selected based on individual physical characteristics. Anyway, the food must contain all the essential macro and micro el-ements. When the optimal supply structure ensures high performance and primary prevention of many diseases (cardiovascular, atheroscle rosis, cancer, and others), increases immune resistance, and en-hanced protection from the effects of adverse environmental factors. Methodological approaches to estimation the safety and biological value of food production in the Tetrahymena pyriformis. Has done a ranking of food products for the food composition and energy val-ue. Determine the balance of these foods in the daily diets. Offered a table of the calculation of the amount of food for the cultivation of a Tetrahymena pyriformis. Developed and experimentally tested two versions of the environment necessary for the study of biological value and food safety in the Tetrahymena pyriformis

Structure and properties of commercially pure titanium nitrided in the plasma of a low-pressure gas discharge produced by a PINK plasma generator

The paper analyzes the surface structure and properties of commercially pure VT1-0 titanium nitrided in the plasma of a low-pressure gas discharge produced by a PINK plasma generator. The analysis demonstrates that the friction coefficient of the nitrided material decreases more than four times and its wear resistance and microhardness increases more than eight and three times, respectively. The physical mechanisms responsible for the enhancement of strength and tribological properties of the material are discussed

Modification of the sample's surface of hypereutectic silumin by pulsed electron beam

The article presents the results of the analysis of the elemental and phase composition, defect substructures. It demonstrates strength and tribological characteristics of the aluminium-silicon alloy of the hypereutectic composition in the cast state and after irradiation with a high-intensity pulsed electron beam of a submillisecond exposure duration (a Solo installation, Institute of High Current Electrons of the Siberian Branch of the Russian Academy of Sciences). The research has been conducted using optical and scanning electron microscopy, and the X-ray phase analysis. Mechanical properties have been characterized by microhardness, tribological properties - by wear resistance and the friction coefficient value. Irradiation of silumin with the high-intensity pulsed electron beam has led to the modification of the surface layer up to 1000 microns thick. The surface layer with the thickness of up to 100 microns is characterized by melting of all phases present in the alloy; subsequent highspeed crystallization leads to the formation of a submicro- and nanocrystalline structure in this layer. The hardness of the modified layer decreases with the increasing distance from the surface exposure. The hardness of the surface layer is more than twice the hardness of cast silumin. Durability of silumin treated with a high intensity electron beam is ≈ 1, 2 times as much as the wear resistance of the cast material

Surface hardening alloy VT6 of electric explosion and by electron beam

The aim is to study the phase composition, structure and properties of the surface layer of the VT6 titanium alloy, subjected to combined treatment, consisting of alloying by the plasma of an electric explosion of a graphite fiber with a charge of the SiC powder and subsequent exposure by a high-intense electron beam. As a result of such treatment, a multiphase surface layer with a submicron and nanosize structure forms with the microhardness manifold exceeding its value in the sample volume are presented

Fabrication of endothelial cell-laden carrageenan microfibers for microvascularized bone tissue engineering applications

ecent achievements in the area of tissue engineering (TE) have enabled the development of three-dimensional (3D) cell-laden hydrogels as in vitro platforms that closely mimic the 3D scenario found in native tissues. These platforms are extensively used to evaluate cellular behavior, cell-cell interactions, and tissue-like formation in highly defined settings. In this study, we propose a scalable and flexible 3D system based on microsized hydrogel fibers that might be used as building blocks for the establishment of 3D hydrogel constructs for vascularized bone TE applications. For this purpose, chitosan (CHT) coated κ-carrageenan (κ-CA) microfibers were developed using a two-step procedure involving ionotropic gelation (for the fiber formation) of κ-CA and its polyelectrolyte complexation with CHT (for the enhancement of fiber stability). The performance of the obtained fibers was assessed regarding their swelling and stability profiles, as well as their ability to carry and, subsequently, promote the outward release of microvascular-like endothelial cells (ECs), without compromising their viability and phenotype. Finally, the possibility of assembling and integrating these cell-laden fibers within a 3D hydrogel matrix containing osteoblast-like cells was evaluated. Overall, the obtained results demonstrate the suitability of the microsized κ-CA fibers to carry and deliver phenotypically apt microvascular-like ECs. Furthermore, it is shown that it is possible to assemble these cell-laden microsized fibers into 3D heterotypic hydrogels constructs. This in vitro 3D platform provides a versatile approach to investigate the interactions between multiple cell types in controlled settings, which may open up novel 3D in vitro culture techniques to better mimic the complexity of tissues.Authors thank the Portuguese Foundation for Science and Technology (FCT) for the personal grants SFRH/BD/42968/2008 through the MIT-Portugal Program (SMM) and SFRH/BD/64070/2009 (EGP). The research leading to these results has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement no REGPOT-CT2012-316331-POLARIS and MIT/ECE/0047/2009 project

Study of the stochastic clustering on the refractory material surface under the effect of plasma load in the PLM device

Tungsten plates were tested in stationary helium discharges in the PLM device. The duration of discharges in the PLM reached 200 minutes. A distinctive feature of this device is the stationary plasma confinement, which is advantageous for testing fusion materials, including materials of the divertor and first wall of a fusion reactor. During plasma irradiation in the PLM, the thermal load on the surface of the tested plates was more than 1 MW/m(2). The temperature of the tested plates amounted to 1000 degrees C and more. Stochastic nanostructures with dimensions of the structural elements of less than 50 nm, including fuzz-type structures, were observed on the processed surfaces of the samples

System of Monitoring and Response to Public Health Emergencies of Sanitary-Epidemiological Character in the CIS Countries

The most important component of strengthening the potential for responding to biological threats both at the national and interstate levels is the formation of a unified system for monitoring and responding to emergencies (ES) of sanitary-epidemiological nature in the CIS territory.The aim of the work was to review the systems for monitoring and responding to emergencies of sanitary-epidemiological character in the CIS countries by the example of the Russian Federation, the Republic of Belarus, the Republic of Kazakhstan and the Kyrgyz Republic, to characterize the main areas of international cooperation on countering biological threats and coordinating international response measures in the CIS countries.Materials and methods. Information and analytical materials provided by organizations responsible for epidemiological surveillance and control in the CIS countries, Internet sources, and publications were used for the study.Results and discussion. The organization and functioning of the systems for monitoring and responding to emergencies in the CIS countries is a state function. It includes, as a rule, the national, regional (sub-national) and territorial (local) levels, which have horizontal and vertical connections. The legal framework is made up of documents of the legislative level. Interdepartmental interaction in response to emergencies is carried out both at the republican level and in administrative territories; the basis for interaction is the integrated planning of preventive and anti-epidemic measures and the functioning of the relevant organizational structures on an ongoing basis. Since 2015, with the support of the Government of the Russian Federation, programs have been implemented aimed at assisting partner countries in the implementation of the International Health Regulations (2005) in order to increase national response capacity and form a unified sanitaryepidemiological emergency response system in the CIS countries. The main areas of collaboration are strengthening the material and technical base and human resources of specialized institutions and scientific cooperation. As a result of the program implementation, a unified system for monitoring and prompt response to emergencies in the field of public health of sanitary-epidemiological nature has essentially been formed in the CIS countries to date, uniting more than 15 specialized institutions from 8 CIS countries