14,921 research outputs found
Vulnerability assessment of the S. João de Loure Bridge: Vouga’s river
Steel bridges are particularly sensible to corrosion, which can put at risk the structural safety by affecting the joint elements. Having this in mind, the objective of this work was to evaluate the influence of the joint's stiffness in the structural response of the S. João de Loure steel bridge. An improved model was developed for the bridge on the structural analysis software SAP2000. Maximum deflection, axial forces and corresponding stresses, and natural frequencies, were analyzed. Numerical results allow concluding about the influence of the joint's stiffness in the structural response of the bridge
S. João de Loure Bridge: vulnerability assessment and study of a common strengthening solution
This paper presents a structural vulnerability assessment of the steel bridge S. João de Loure. A structural model of the bridge was created and the influence of the joint’s stiffness on its structural response was evaluated using the structural analysis software SAP2000. Natural frequencies, axial forces and corresponding stress, and maximum mid-span deflection, were analyzed. A common strengthening solution with prestressing cables was studied intending to reduce the bridge’s mid-span deflection
Theoretical prediction of interference loading on aircraft stores: Part I - Subsonic speeds
Computer program is developed for theoretically predicting loading on pylon-mounted stores in subsonic compressible flow. Linear theory predicts flow field produced by aircraft wing, nose, inlet, and pylons. Program was written in FORTRAN IV for CDC 6000 computer
Theoretical prediction of interference loading on aircraft stores: Part II - Supersonic speeds
Linear theory is used, without two dimensional or slender body assumptions, to predict flow field produced by aircraft wing, nose, inlet, and pylons. Aircraft shock wave locations are predicted, and their effect on flow field is included through transformation of aircraft geometry. Program was written in FORTRAN IV for CDC 6400 computer
Experimental and numerical analysis of the cyclic behaviour of RC beam-column connections with plain reinforcing bars
The information available in the literature about the cyclic behaviour of reinforced concrete elements with plain reinforcing bars is scarce. As a consequence, the influence of bar slippage in elements with plain bars is not yet comprehensively understood. In this paper are presented and discussed the main results of the cyclic tests carried out on five full-scale reinforced concrete beam-column joints with plain bars and without specific detailing for seismic demands. An additional joint specimen with deformed bars was also tested for comparison. Furthermore, numerical models were built to simulate the response of two of the specimens. Particular attention was given to the influence of bar slippage. The results of the conducted analyses underline the importance of accounting for bond-slip in the numerical modelling of elements with plain bars and also highlight the need for specific models to simulate the effects of this mechanism in the presence of plain bars
B-cell Prolymphocytic Leukemia in a Young Male
B-cell prolymphocytic leukemia [B-PLL] is a neoplasm of B prolymphocytes affecting the peripheral blood, bone marrow and spleen. The principal disease characteristics are massive splenomegaly with absent or minimal peripheral lymphadenopathy and a rapidly rising lymphocyte count. Here, we report a case of B-PLL in a 42 year old male who had come for routine health check up
On the Modeling of Droplet Evaporation on Superhydrophobic Surfaces
When a drop of water is placed on a rough surface, there are two possible
extreme regimes of wetting: the one called Cassie-Baxter (CB) with air pockets
trapped underneath the droplet and the one characterized by the homogeneous
wetting of the surface, called the Wenzel (W) state. A way to investigate the
transition between these two states is by means of evaporation experiments, in
which the droplet starts in a CB state and, as its volume decreases, penetrates
the surface's grooves, reaching a W state. Here we present a theoretical model
based on the global interfacial energies for CB and W states that allows us to
predict the thermodynamic wetting state of the droplet for a given volume and
surface texture. We first analyze the influence of the surface geometric
parameters on the droplet's final wetting state with constant volume, and show
that it depends strongly on the surface texture. We then vary the volume of the
droplet keeping fixed the geometric surface parameters to mimic evaporation and
show that the drop experiences a transition from the CB to the W state when its
volume reduces, as observed in experiments. To investigate the dependency of
the wetting state on the initial state of the droplet, we implement a cellular
Potts model in three dimensions. Simulations show a very good agreement with
theory when the initial state is W, but it disagrees when the droplet is
initialized in a CB state, in accordance with previous observations which show
that the CB state is metastable in many cases. Both simulations and theoretical
model can be modified to study other types of surface.Comment: 23 pages, 7 figure
Nonlinear modeling of the cyclic response of RC columns
Cyclic load reversals (like those induced by earthquakes) result in accelerated bond degradation, leading to significant bar slippage. The bond-slip mechanism is reported to be one of the most common causes of damage and even collapse of existing RC structures subjected to earthquake loading. RC structures with plain reinforcing bars, designed and built prior to the enforcement of the modern seismic-oriented design philosophies, are particularly sensitive to bond degradation. However, perfect bond conditions are typically assumed in the numerical analysis of RC structures. This paper describes the numerical modeling of the cyclic response of two RC columns, one built with deformed bars and the other with plain bars and structural detailing similar to that typically adopted in pre-1970s structures. For each column, different modeling strategies to simulate the column response were tested. Models were built using the OpenSees and the SeismoStruct platforms, and calibrated with the available tests results. Within each platform, different types of nonlinear elements were used to represent the columns. Bond-slip effects were included in the OpenSees models resorting to a simple modeling strategy. The models and the parameters adopted are presented and discussed. Comparison is established between the most relevant experimental results and the corresponding results provided by the numerical models. Conclusions are drawn about the capacity of the tested models to simulate the columns response and about the influence of considering or not considering the effects of bars slippage
Seismic assessment and strengthening of an existing steel bridge in Portugal
This article presents the seismic vulnerability assessment of the S. João de Loure bridge, in
Portugal. The single span steel bridge has riveted joints, commonly affected by corrosion,
which can lead to a significant stiffness reduction. With the objective of evaluating the
influence of the joints stiffness in the structural response of the bridge, a structural model of
the bridge was created, and natural frequencies, maximum axial forces and maximum stresses,
and maximum mid-span deflection were analysed. Four possible element rupture scenarios
where also studied. Two of them where proved to be a risk for the structural safety of the
bridge. A commonly used strengthening solution intending to reduce the bridge’s mid-span
deflection with external pre-stressing cables was studied
Transition (LINER/HII) nuclei as evolved Composite (Seyfert 2/Starburst) nuclei
We compare the circumnuclear stellar population and environmental properies
of Seyfert and Composite (Seyfert + Starburst) nuclei with those of LINERs and
LINER/HII transition galaxies (TOs), and discuss evidences for evolution from
Seyfert/Composite to LINER/TO nuclei.Comment: 2 pages, 1 figure; to appear in the Proceedings of IAU Symp. No. 222:
The Interplay among Black Holes, Stars and ISM in Galactic Nuclei, CUP, eds.
T. Storchi-Bergmann, L. Ho and H. R. Schmit
- …