51,770 research outputs found
Theoretical aerodynamics of upper-surface-blowing jet-wing interaction
A linear, inviscid subsonic compressible flow theory is formulated to treat the aerodynamic interaction between the wing and an inviscid upper-surface-blowing (USB) thick jet with Mach number nonuniformity. The predicted results show reasonably good agreement with some available lift and induced-drag data. It was also shown that the thin-jet-flap theory is inadequate for the USB configurations with thick jet. Additional theoretical results show that the lift and induced drag were reduced by increasing jet temperature and increased by increasing jet Mach number. Reducing jet aspect ratio, while holding jet area constant, caused reductions in lift, induced drag, and pitching moment at a given angle of attack but with a minimal change in the curve of lift coefficient against induced-drag coefficient. The jet-deflection effect was shown to be beneficial to cruise performance. The aerodynamic center was shifted forward by adding power or jet-deflection angle. Moving the jet away from the wing surface resulted in rapid changes in lift and induced drag. Reducing the wing span of a rectangular wing by half decreased the jet-circulation lift by only 24 percent at a thrust coefficient of 2
Theoretical predictions of jet interaction effects for USB and OWB configurations
A wing jet interaction theory is presented for predicting the aerodynamic characteristics of upper surface blowing and over wing blowing configurations. For the latter configurations, a new jet entrainment theory is developed. Comparison of predicted results with some available data showed good agreement. Some applications of the theory are also presented
Experimental wake survey behind Viking 75 entry vehicle at angles of attack of 0 deg, 5 deg, and 10 deg, Mach numbers from 0.20 to 1.20, and longitudinal stations from 1.50 to 11.00 body diameters
An investigation was conducted to obtain flow properties in the wake of a preliminary configuration of the Viking '75 Entry Vehicle at Mach numbers from 0.20 to 1.20 and at angles of attack of 0 deg, 5 deg, and 10 deg. The wake flow properties were calculated from total and static pressures measured with a pressure rake at longitudinal stations varying from 1.50 to 11.00 body diameters, and are presented in tabulated and plotted form. The wake properties were essentially symmetrical about the X-axis at alpha = 0 deg and the profiles were shifted away from the X-axis at angles of attack. An unexpected reduction in wake property ratios occurred as the Mach number increased from 0.60 to 1.00; these ratios then increased as the Mach number increased to 1.20. The reduction was present for all the longitudinal stations of the tests and decreased with increased longitudinal distance
Highly frustrated spin-lattice models of magnetism and their quantum phase transitions: A microscopic treatment via the coupled cluster method
We outline how the coupled cluster method of microscopic quantum many-body
theory can be utilized in practice to give highly accurate results for the
ground-state properties of a wide variety of highly frustrated and strongly
correlated spin-lattice models of interest in quantum magnetism, including
their quantum phase transitions. The method itself is described, and it is
shown how it may be implemented in practice to high orders in a systematically
improvable hierarchy of (so-called LSUB) approximations, by the use of
computer-algebraic techniques. The method works from the outset in the
thermodynamic limit of an infinite lattice at all levels of approximation, and
it is shown both how the "raw" LSUB results are themselves generally
excellent in the sense that they converge rapidly, and how they may accurately
be extrapolated to the exact limit, , of the truncation
index , which denotes the {\it only} approximation made. All of this is
illustrated via a specific application to a two-dimensional, frustrated,
spin-half -- model on a honeycomb lattice with
nearest-neighbor and next-nearest-neighbor interactions with exchange couplings
and , respectively, where both
interactions are of the same anisotropic type. We show how the method can
be used to determine the entire zero-temperature ground-state phase diagram of
the model in the range of the frustration parameter and
of the spin-space anisotropy parameter. In particular,
we identify a candidate quantum spin-liquid region in the phase space
Spin-1/2 - Heisenberg model on a cross-striped square lattice
Using the coupled cluster method (CCM) we study the full (zero-temperature)
ground-state (GS) phase diagram of a spin-half () -
Heisenberg model on a cross-striped square lattice. Each site of the square
lattice has 4 nearest-neighbour exchange bonds of strength and 2
next-nearest-neighbour (diagonal) bonds of strength . The bonds
are arranged so that the basic square plaquettes in alternating columns have
either both or no bonds included. The classical () version of the model has 4 collinear phases when and
can take either sign. Three phases are antiferromagnetic (AFM), showing
so-called N\'{e}el, double N\'{e}el and double columnar striped order
respectively, while the fourth is ferromagnetic. For the quantum model
we use the 3 classical AFM phases as CCM reference states, on top of which the
multispin-flip configurations arising from quantum fluctuations are
incorporated in a systematic truncation hierarchy. Calculations of the
corresponding GS energy, magnetic order parameter and the susceptibilities of
the states to various forms of valence-bond crystalline (VBC) order are thus
carried out numerically to high orders of approximation and then extrapolated
to the (exact) physical limit. We find that the model has 5 phases,
which correspond to the four classical phases plus a new quantum phase with
plaquette VBC order. The positions of the 5 quantum critical points are
determined with high accuracy. While all 4 phase transitions in the classical
model are first order, we find strong evidence that 3 of the 5 quantum phase
transitions in the model are of continuous deconfined type
A frustrated spin-1/2 Heisenberg antiferromagnet on a chevron-square lattice
The coupled cluster method (CCM) is used to study the zero-temperature
properties of a frustrated spin-half () -- Heisenberg
antiferromagnet (HAF) on a 2D chevron-square lattice. Each site on an
underlying square lattice has 4 nearest-neighbor exchange bonds of strength
and 2 next-nearest-neighbor (diagonal) bonds of strength , with each square plaquette having only one diagonal bond.
The diagonal bonds form a chevron pattern, and the model thus interpolates
smoothly between 2D HAFs on the square () and triangular () lattices,
and also extrapolates to disconnected 1D HAF chains (). The
classical () version of the model has N\'{e}el order for and a form of spiral order for , where
. For the model we use both these classical
states, as well as other collinear states not realized as classical
ground-state (GS) phases, as CCM reference states, on top of which the
multispin-flip configurations resulting from quantum fluctuations are
incorporated in a systematic truncation scheme, which we carry out to high
orders and extrapolate to the physical limit. We calculate the GS energy, GS
magnetic order parameter, and the susceptibilities of the states to various
forms of valence-bond crystalline (VBC) order, including plaquette and two
different dimer forms. We find that the model has two quantum
critical points, at and ,
with N\'{e}el order for , a form of spiral order for
that includes the correct three-sublattice
spin ordering for the triangular-lattice HAF at , and
parallel-dimer VBC order for
Multiple goals and time constraints : perceived impact on physicians' performance of evidence-based behaviours
Peer reviewedPublisher PD
Goal conflict, goal facilitation, and health professionals' provision of physical activity advice in primary care : An exploratory prospective study
Peer reviewedPublisher PD
- ā¦