Radiation and magnetic field effects on new semiconductor power devices for HL-LHC experiments

The radiation hardness of commercial Silicon Carbide and Gallium Nitride power MOSFETs is presented in this paper, for Total Ionizing Dose effects and Single Event Effects, under gamma, neutrons, protons and heavy ions. Similar tests are discussed for commercial DC-DC converters, also tested in operation under magnetic field

The industrial applicability of PEA space charge measurements, for performance optimization of HVDC power cables

Cable manufacturing industries are constantly trying to improve the electrical performance of power cables. During the years, it was found that one of the most relevant degradation factors influencing the cable lifetime is the presence of space charge in the insulation layer. To detect the accumulated charge, the pulsed electro-acoustic (PEA) method is the most used technique. Despite the wide use of the PEA cell, several issues are still present. In particular, the PEA output signal is strongly disturbed by the acoustic waves reflections within the PEA cell. This causes the distortion of the output signal and therefore the misinterpretation of the charge profiles. This, in turn, may result in an incorrect cable characterization from the space charge phenomenon point of view. In 2017, due to the proved degradation effect of the space charge accumulation phenomenon, the IEEE Std 1732 was developed. This standard describes the steps to be followed for the space charge measurement in cables specimens during pre-qualification or type tests. Therefore, cable manufacturing industries started to take a particular interest in these measures. In the light of this, the aim of the present work is to highlight that the enacted standard is not easily applicable since various problems are still present in the PEA method for cables. In particular, in this work, the effect of multiple reflected signals due to the different interfaces involved, but also the effect of the signal attenuation due to cable dielectric thickness, as well as the effect of the PEA cell ground electrode thickness in the output charge profile, are reported. These issues have been demonstrated by means of an experimental test carried out on a full-size cable in the Prysmian Group High Voltage laboratory. To better understand the PEA cell output signal formation, a PEA cell model was developed in a previous work and it has been experimentally validated here. In particular, simulations have been useful to highlight the effect of the reflection phenomena due to the PEA cell ground electrode thickness on the basis of the specimen under test features. Moreover, by analyzing the simulation results, it was possible to separate the main signal from the reflected waves and, in turn, to calculate the suitable ground electrode thickness for the cable specimen under test

Time resolved confocal luminescence investigations on Reverse Proton Exchange Nd:LiNbO3 channel waveguides

This paper was published in Optics Express and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: http://dx.doi.org/10.1364/OE.15.008805. Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under la

A methodology for assessing the impact of salinity gradient power generation in urban contexts

The paper proposes a methodology to assess the potential impact of salinity gradient power technology in urban contexts. The idea to employ such energy source in urban contexts derives from the observation that, among the energy districts outputs, low-salinity treated wastewater can be used to produce electricity if a suitable source of high salinity feed (seawater of a salt-works) is also available. The methodology uses the HOMER software for assessing the district’s electric energy production, consumption and exchange with the main grid. Then, starting from the total gross surface and the number of inhabitants of the district, some possible realistic scenarios characterized by different wastewater flow rate are defined. Finally, for each scenario the size and the yearly energy production of the salinity gradient power system are calculated thanks to a simulator carried out by the same authors. An application example, considering three different scenarios, shows that urban density plays a crucial role in the process and that the most promising realistic scenarios are those including treated wastewater and brine and unlimited seawater and brine. The economic feasibility of the salinity gradient power technology is evaluated by a comparison with classical renewable technologies such as photovoltaic and wind systems

Surface Periodic Poling in Lithium Niobate and Lithium Tantalate

Periodic Poling of Lithium Niobate crystals (PPLN) by means of electric field has revealed the best technique for finely tailoring PPLN structures and parameters, which play a central role in many current researches in the field of nonlinear integrated optics. Besides the most studied technique of bulk poling, recently a novel technique where domain inversion occurs just in a surface layer using photoresist or silica masks has been devised and studied. This surface periodic poling (SPP) approach is best suited when light is confined in a thin surface guiding layer or stripe, as in the case of optical waveguide devices. Also, we found that SPP respect to bulk poling offers two orders of magnitude reduction on the scale of periodicity, so that even nanostructures can be obtained provided an high resolution holographic mask writing technique is adopted. We were able to demonstrate 200 nm domain size, and also good compatibility with alpha-phase proton exchange channel waveguide fabrication. Our first experiments on Lithium Tantalate have also shown that the SPP technology appears to be applicable to this crystal (SPPLT), whose properties can allow to overcome limitations such as optical damage or UV absorption still present in PPLN devices. Finally, the issue of SPP compatibility with proton exchange waveguide fabrication will be addresse