2,086 research outputs found

    Pre-employment, post-offer physical testing in the construction industry

    Get PDF
    Includes bibliographical references

    Black and Latino Fathers of Students With Autism: Culturally Responsive Support

    Get PDF
    Perspectives from five Black and Latino fathers of students with autism are shared from this qualitative pilot study. The fathers were asked to describe the most helpful forms of support from school counselors. One-time, semi-structured interviews were conducted and interpreted with the thematic analysis method. Results suggest support from other parents, and specifically from other fathers, with shared experiences is most helpful. Recommendations for school counseling practice and research are shared

    High Field Q Slope and the Effect of Low-Temperature Baking at 3 GHz

    Get PDF
    A strong degradation of the unloaded quality factor with field, called high field Q slope, is commonly observed above Bp ≅ 100 mT in elliptical superconducting niobium cavities at 1.3 and 1.5 GHz. In the present experiments several 3 GHz niobium cavities were measured up to and above Bp ≅ 100 mT. The measurements show that a high field Q slope phenomenon limits the field reach at this frequency, that the high field Q slope onset field depends weakly on the frequency, and that the high field Q slope can be removed by the typical empirical solution of electropolishing followed by heating to 120°C for 48 hrs. In addition, one of the cavities reached a quench field of 174 mTand its field dependence of the quality factor was compared against global heating predicted by a thermal feedback model

    Meeting Report: The Use of Newborn Blood Spots in Environmental Research: Opportunities and Challenges

    Get PDF
    IntroductionDried blood spots (DBS) are routinely collected from newborns in the United States using a heel stick. The DBS are screened for inborn errors of metabolism and other disorders. More states are keeping residual spots and making them available for research purposes. DNA extraction from the DBS has been widely applied; however, the development of methods to measure a range of environmental toxicants in DBS has been a more recent goal for laboratory scientists and epidemiologists.ObjectivesThe purpose of the meeting was to examine the utility of DBS to measure environmental exposures. Speakers and discussants were invited to present data and discuss approaches to measure a range of analytes using DBS.ResultsThis meeting was held on 20 February 2007 at the University of North Carolina at Chapel Hill. The audience consisted of epidemiologists, chemists, and staff from state public health programs, the Centers for Disease Control and Prevention, and the National Institutes of Health. The meeting included presentations on measurement of flame-retarding chemicals and pesticides, metals, perchlorate, infectious agents, markers of immune status, and protein adducts. Analytical methods included mass spectrometry, atomic absorption, molecular methods, and microfluidic techniques. Significant progress was reported, but important challenges remain. Concerns including storage conditions, sample volume, contamination, and normalization require additional systematic evaluation. In addition, DBS storage and access policies require coordination.ConclusionsDBS remain a highly valuable resource for clinical, epidemiologic, and toxicologic investigation. The use of DBS to measure environmental exposures shows promise but additional work is necessary before more widespread use is warranted

    Decoupling Graphene from SiC(0001) via Oxidation

    Full text link
    When epitaxial graphene layers are formed on SiC(0001), the first carbon layer (known as the "buffer layer"), while relatively easy to synthesize, does not have the desirable electrical properties of graphene. The conductivity is poor due to a disruption of the graphene pi-bands by covalent bonding to the SiC substrate. Here we show that it is possible to restore the graphene pi-bands by inserting a thin oxide layer between the buffer layer and SiC substrate using a low temperature, CMOS-compatible process that does not damage the graphene layer

    Simulation Studies on the Interactions of Electron Beam with Wastewater

    Get PDF
    The manufactured chemical pollutants, like 1,4 dioxane and PFAS (per- and polyfluroralkyl substances), found in the underground water and/or drinking water are challenging to be removed or biodegraded. Energetic electrons are capable of mediating and removing them. This paper utilizes FLUKA code to evaluate the beam-wastewater interaction effects with different energy, space and divergence distributions of the electron beam. With 8 MeV average energy, the electron beam exits from a 0.0127 cm thick titanium window, travels through a 4.3 cm distance air and a second 0.0127 cm thick stainless water container window with 2.43 cm radius, and finally is injected into the water area, where the volume of water is around 75 cubic cm. The distribution parameters of the electron beam are from the GPT (General Particle Tracer) simulations for UITF (Upgraded Injector Test Facility) in Jefferson lab. By varying the distributions, several measurements including the dose (or energy deposition) distribution, electron fluence, photon fluence are scored and compared. Taking the comparisons into consideration, this paper is aiming to find better electron beams for the wastewater irradiation

    Molecular Dynamics Simulation of Compressible Fluid Flow in Two-Dimensional Channels

    Full text link
    We study compressible fluid flow in narrow two-dimensional channels using a novel molecular dynamics simulation method. In the simulation area, an upstream source is maintained at constant density and temperature while a downstream reservoir is kept at vacuum. The channel is sufficiently long in the direction of the flow that the finite length has little effect on the properties of the fluid in the central region. The simulated system is represented by an efficient data structure, whose internal elements are created and manipulated dynamically in a layered fashion. Consequently the code is highly efficient and manifests completely linear performance in simulations of large systems. We obtain the steady-state velocity, temperature, and density distributions in the system. The velocity distribution across the channel is very nearly a quadratic function of the distance from the center of the channel and reveals velocity slip at the boundaries; the temperature distribution is only approximately a quartic function of this distance from the center to the channel. The density distribution across the channel is non-uniform. We attribute this non-uniformity to the relatively high Mach number, approximately 0.5, in the fluid flow. An equation for the density distribution based on simple compressibility arguments is proposed; its predictions agree well with the simulation results. Validity of the concept of local dynamic temperature and the variation of the temperature along the channel are discussed.Comment: 16 pages (in latex) + 8 figures (in a single ps file). Submitted to the Physical Review

    Electrostatic Design and Conditioning of a Triple Point Junction Shield for a −200 kV DC High Voltage Photogun

    Get PDF
    Nuclear physics experiments performed at the Continuous Electron Beam Accelerator Facility (CEBAF) at the Jefferson Lab require a DC high voltage photogun to generate polarized electron beams from GaAs photocathodes. The photogun uses a tapered ceramic insulator that extends into the vacuum chamber and mechanically holds the cathode electrode. Increasing the operating voltage from nominal −130 kV to −200 kV will provide lower beam emittance, better transmission through injector apertures, and improved photocathode lifetime. This desire to increase the photogun operating voltage led to the design of a triple-point-junction shield electrode which minimizes the electric field at the delicate insulator-metal-vacuum interface and linearizes the potential across the insulator, thus reducing the risk of arcing along the ceramic insulator. This work describes the results obtained using COMSOL® electrostatic-field simulation software and presents the high voltage conditioning results of the upgraded −200 kV CEBAF photogun. Published by AIP Publishing

    Agent-Based Modeling of Intracellular Transport

    Full text link
    We develop an agent-based model of the motion and pattern formation of vesicles. These intracellular particles can be found in four different modes of (undirected and directed) motion and can fuse with other vesicles. While the size of vesicles follows a log-normal distribution that changes over time due to fusion processes, their spatial distribution gives rise to distinct patterns. Their occurrence depends on the concentration of proteins which are synthesized based on the transcriptional activities of some genes. Hence, differences in these spatio-temporal vesicle patterns allow indirect conclusions about the (unknown) impact of these genes. By means of agent-based computer simulations we are able to reproduce such patterns on real temporal and spatial scales. Our modeling approach is based on Brownian agents with an internal degree of freedom, θ\theta, that represents the different modes of motion. Conditions inside the cell are modeled by an effective potential that differs for agents dependent on their value θ\theta. Agent's motion in this effective potential is modeled by an overdampted Langevin equation, changes of θ\theta are modeled as stochastic transitions with values obtained from experiments, and fusion events are modeled as space-dependent stochastic transitions. Our results for the spatio-temporal vesicle patterns can be used for a statistical comparison with experiments. We also derive hypotheses of how the silencing of some genes may affect the intracellular transport, and point to generalizations of the model
    • …
    corecore