123 research outputs found
6G Wireless Systems: Vision, Requirements, Challenges, Insights, and Opportunities
Mobile communications have been undergoing a generational change every ten
years or so. However, the time difference between the so-called "G's" is also
decreasing. While fifth-generation (5G) systems are becoming a commercial
reality, there is already significant interest in systems beyond 5G, which we
refer to as the sixth-generation (6G) of wireless systems. In contrast to the
already published papers on the topic, we take a top-down approach to 6G. We
present a holistic discussion of 6G systems beginning with lifestyle and
societal changes driving the need for next generation networks. This is
followed by a discussion into the technical requirements needed to enable 6G
applications, based on which we dissect key challenges, as well as
possibilities for practically realizable system solutions across all layers of
the Open Systems Interconnection stack. Since many of the 6G applications will
need access to an order-of-magnitude more spectrum, utilization of frequencies
between 100 GHz and 1 THz becomes of paramount importance. As such, the 6G
eco-system will feature a diverse range of frequency bands, ranging from below
6 GHz up to 1 THz. We comprehensively characterize the limitations that must be
overcome to realize working systems in these bands; and provide a unique
perspective on the physical, as well as higher layer challenges relating to the
design of next generation core networks, new modulation and coding methods,
novel multiple access techniques, antenna arrays, wave propagation,
radio-frequency transceiver design, as well as real-time signal processing. We
rigorously discuss the fundamental changes required in the core networks of the
future that serves as a major source of latency for time-sensitive
applications. While evaluating the strengths and weaknesses of key 6G
technologies, we differentiate what may be achievable over the next decade,
relative to what is possible.Comment: Accepted for Publication into the Proceedings of the IEEE; 32 pages,
10 figures, 5 table
Reconfigurable Computing Applied to Latency Reduction for the Tactile Internet
Tactile internet applications allow robotic devices to be remotely controlled
over a communication medium with an unnoticeable time delay. In a bilateral
communication, the acceptable round trip latency is usually in the order of 1ms
up to 10ms depending on the application requirements. It is estimated that 70%
of the total latency is generated by the communication network, and the
remaining 30% is produced by master and slave devices. Thus, this paper aims to
propose a strategy to reduce 30% of the total latency that is produced by such
devices. The strategy is to apply reconfigurable computation using FPGAs to
minimize the execution time of device-associated algorithms. With this in mind,
this work presents a hardware reference model for modules that implement
nonlinear positioning and force calculations as well as a tactile system formed
by two robotic manipulators. In addition to presenting the implementation
details, simulations and experimental tests are performed in order to validate
the proposed model. Results associated with the FPGA sampling rate, throughput,
latency, and post-synthesis occupancy area are analyzed.Comment: 20 pages, 32 Figure
Maximization of the optical intra-cavity power of whispering-gallery mode resonators via coupling prism
In this paper, a detailed description of the optical coupling into a Whispering Gallery Mode (WGM) resonator through a prism via frustrated total internal reflection (FTIR) is presented. The problem is modeled as three media with planar interfaces and closed expressions for FTIR are given. Then, the curvature of the resonator is taken into account and the mode overlap is theoretically studied. A new analytical expression giving the optimal geometry of a disc-shaped or ring-shaped resonator for maximizing the intra-cavity circulating power is presented. Such expression takes into consideration the spatial distribution of the WGM at the surface of the resonator, thus being more accurate than the currently used expressions. It also takes into account the geometry of the prism. It is shown an improvement in the geometry values used with the current expressions of about 30%. The reason why the pump laser signal can be seen in experiments under critical coupling is explained on this basis. Then, the conditions required for exciting the highest possible optical power inside the resonator are obtained. The aim is to achieve a highly-efficient up-conversion of a THz signal into the optical domain via the second-order nonlinearity of the resonator material.This work has been financially supported by "DiDaCTIC: Desarrollo de un sistema de comunicaciones inalámbrico en rango THz integrado de alta tasa de datos", TEC2013-47753-C3, CAM S2013/ICE-3004 "DIFRAGEOS" projects, "Proyecto realizado con la Ayuda Fundación BBVA a Investigadores y Creadores Culturales 2016" and "Estancias de movilidad de profesores PRX16/00021"
Receiver design for the uplink of base station cooperation systems employing SC-FDE modulations
The presented paper considers the uplink transmission in base station (BS) cooperation schemes where mobile terminals (MTs) in adjacent cells share the same physical channel. We consider single-carrier with frequency-domain equalization (SC-FDE) combined with iterative frequency-domain receivers based on the iterative block decision feedback equalization (IB-DFE). We study the quantization requirements when sending the received signals, from different MTs, at different BSs to a central unit that performs the separation of different MTs using iterative frequency-domain receivers. Our performance results show that a relatively coarse quantization, with only 4 bits in the in-phase and quadrature components of the complex envelope already allows close-to-optimum macro-diversity gains, as well as an efficient separation of the transmitted signals associated with each MT
Connected vehicle testbed: development & deployment of C-ITS in the UK
The age of the connected vehicle is rapidly dawning. This will allow us to revolutionise both our transport and communication infrastructures. In terms of transport, connected vehicles will enable an Intelligent Transport System (ITS) to be built which will lead to better traffic and road management, shorter journey times, less accidents, better collision avoidance mechanisms and increased efficiency in the management of transport disasters.
In terms of communication, this means that the mobile phone will no longer be the only major communication device for the user, as the connected vehicle will also be viewed as a first class communication object. Hence, applications will be able to migrate between the phone and the vehicle as people move around. In order to understand this coming age, it is necessary to build new technologies, testbeds and applications that will give us insight into this brave new world. Vehicular Ad-Hoc Networks (VANETs) or ITS-G5 provide low-latency and high bandwidth enabling life-critical safety and infotainment applications to be developed. There is also a need to integrate VANET/ITS-G5 technology with emerging standards such as 5G. [...
- …