The electronically steerable parasitic array radiator antenna for wireless communications : signal processing and emerging techniques

Smart antenna technology is expected to play an important role in future wireless communication networks in order to use the spectrum efficiently, improve the quality of service, reduce the costs of establishing new wireless paradigms and reduce the energy consumption in wireless networks. Generally, smart antennas exploit multiple widely spaced active elements, which are connected to separate radio frequency (RF) chains. Therefore, they are only applicable to base stations (BSs) and access points, by contrast with modern compact wireless terminals with constraints on size, power and complexity. This dissertation considers an alternative smart antenna system the electronically steerable parasitic array radiator (ESPAR) which uses only a single RF chain, coupled with multiple parasitic elements. The ESPAR antenna is of significant interest because of its flexibility in beamforming by tuning a number of easy-to-implement reactance loads connected to parasitic elements; however, parasitic elements require no expensive RF circuits. This work concentrates on the study of the ESPAR antenna for compact transceivers in order to achieve some emerging techniques in wireless communications. The work begins by presenting the work principle and modeling of the ESPAR antenna and describes the reactance-domain signal processing that is suited to the single active antenna array, which are fundamental factors throughout this thesis. The major contribution in this chapter is the adaptive beamforming method based on the ESPAR antenna. In order to achieve fast convergent beamforming for the ESPAR antenna, a modified minimum variance distortionless response (MVDR) beamfomer is proposed. With reactance-domain signal processing, the ESPAR array obtains a correlation matrix of receive signals as the input to the MVDR optimization problem. To design a set of feasible reactance loads for a desired beampattern, the MVDR optimization problem is reformulated as a convex optimization problem constraining an optimized weight vector close to a feasible solution. Finally, the necessary reactance loads are optimized by iterating the convex problem and a simple projector. In addition, the generic algorithm-based beamforming method has also studied for the ESPAR antenna. Blind interference alignment (BIA) is a promising technique for providing an optimal degree of freedom in a multi-user, multiple-inputsingle-output broadcast channel, without the requirements of channel state information at the transmitters. Its key is antenna mode switching at the receive antenna. The ESPAR antenna is able to provide a practical solution to beampattern switching (one kind of antenna mode switching) for the implementation of BIA. In this chapter, three beamforming methods are proposed for providing the required number of beampatterns that are exploited across one super symbol for creating the channel fluctuation patterns seen by receivers. These manually created channel fluctuation patterns are jointly combined with the designed spacetime precoding in order to align the inter-user interference. Furthermore, the directional beampatterns designed in the ESPAR antenna are demonstrated to improve the performance of BIA by alleviating the noise amplification. The ESPAR antenna is studied as the solution to interference mitigation in small cell networks. Specifically, ESPARs analog beamforming presented in the previous chapter is exploited to suppress inter-cell interference for the system scenario, scheduling only one user to be served by each small BS at a single time. In addition, the ESPAR-based BIA is employed to mitigate both inter-cell and intracell interference for the system scenario, scheduling a small number of users to be simultaneously served by each small BS for a single time. In the cognitive radio (CR) paradigm, the ESPAR antenna is employed for spatial spectrum sensing in order to utilize the new angle dimension in the spectrum space besides the conventional frequency, time and space dimensions. The twostage spatial spectrum sensing method is proposed based on the ESPAR antenna being targeted at identifying white spectrum space, including the new angle dimension. At the first stage, the occupancy of a specific frequency band is detected by conventional spectrum-sensing methods, including energy detector and eigenvalue-based methods implemented with the switched-beam ESPAR antenna. With the presence of primary users, their directions are estimated at the second stage, by high-resolution angle-of-arrival (AoA) estimation algorithms. Specifically, the compressive sensing technology has been studied for AoA detection with the ESPAR antenna, which is demonstrated to provide high-resolution estimation results and even to outperform the reactance-domain multiple signal classification

MIMO-OFDM systems for IEEE 802.11n WLAN Standard using ESPAR antenna

This paper proposes MIMO-OFDM system for IEEE 802.11n using electronically steerable parasitic array radiator (ESPAR) antenna. Although the 2 x 2 MIMO-OFDM system is capable of doubling the capacity without expanding the occupied frequency bandwidth, we can’t obtain the additional diversity gain using the linear MIMO decomposition method. The proposed method can improve the bit error rate performance of the MIMO-OFDM receiver by making efficient use of ESPAR antenna. Computer simulation result shows that the proposed scheme gives the additional diversity gain. Keywords: MIMO-OFDM, ESPAR, HTLTF, decomposition

Performance Analysis for Single-fed ESPAR in the Presence of Impedance Errors and Imperfect CSI

Existing MIMO precoding techniques assume conventional antenna arrays with multiple radio-frequency (RF) chains each connected to a different antenna. Towards small portable devices and base stations, single-fed compact arrays, also known as electronically steerable parasitic antenna radiators (ESPAR) have recently emerged as a new antenna structure that requires only a single RF chain. In this paper, we study the ESPAR based antenna arrays and explore linear precoding schemes for ESPAR antennas. The closed-form expression for the computation of the tunable loads and the feeding voltage is firstly shown and the impact of impedance errors and imperfect CSI on the performance is also investigated analytically. It will be shown that the impedance errors will act as an additional noise source that is independent of the SNR and thus result in an error floor at high SNR. We further study the energy efficiency of both conventional MIMO and ESPAR-based MIMO systems. Simulation results validate our analysis and show that ESPAR without impedance errors can achieve a similar performance to conventional antenna arrays and a higher energy efficiency, while the performance degradation due to impedance errors motivates the design of robust precoding schemes

Opportunistic Spectrum Sharing using Dumb Basis Patterns: The Line-of-Sight Interference Scenario

We investigate a spectrum-sharing system with non-severely faded mutual interference links, where both the secondary-to-primary and primary-to-secondary channels have a Line-of-Sight (LoS) component. Based on a Rician model for the LoS channels, we show, analytically and numerically, that LoS interference hinders the achievable secondary user capacity. This is caused by the poor dynamic range of the interference channels fluctuations when a dominant LoS component exists. In order to improve the capacity of such system, we propose the usage of an Electronically Steerable Parasitic Array Radiator (ESPAR) antenna at the secondary terminals. An ESPAR antenna requires a single RF chain and has a reconfigurable radiation pattern that is controlled by assigning arbitrary weights to M orthonormal basis radiation patterns. By viewing these orthonormal patterns as multiple virtual dumb antennas, we randomly vary their weights over time creating artificial channel fluctuations that can perfectly eliminate the undesired impact of LoS interference. Because the proposed scheme uses a single RF chain, it is well suited for compact and low cost mobile terminals

UTHM water quality classification based on sub index

River or stream at their source is unpolluted, but as water flow downstream, the river or lake is receiving point and non-point pollutant source. Ammoniacal nitrogen (NH3- N) and suspended solids (SS) strongly influences the dynamics of the dissolved oxygen in the water. Studies on monitoring this parameter were conducted for a river or lake but limited to the small man-made lake. This study is initiate to determine the changes in water quality of UTHM watershed as the water flows from upstream to downstream. The monitoring of NH3-N and TSS were monitored at two sampling schemes, 1) at the two-week interval and, 2) at a daily basis followed by the determination of the water quality sub-index particularly SIAN and SISS. The results showed that the two lakes in UTHM watershed were classified as polluted. In conclusion, the remedial action should be implemented to improve the water quality to meet the requirements at least to meet the recreational purpose

Microstrip Patch Electrically Steerable Parasitic Array Radiators

This dissertation explores the expansion of the Electrically Steerable Parasitic Array Radiator (ESPAR) technology to arrays using microstrip patch elements. Scanning arrays of two and three closely-coupled rectangular patch elements are presented, which incorporate no phase shifters. These arrays achieve directive radiation patterns and scanning of up to 26° with maintained impedance match. The scanning is effected by tunable reactive loads which are used to control the mutual coupling between the elements, as well as additional loads which compensate to maintain the appropriate resonant frequency. The design incorporates theoretical analysis of the system of coupled antennas with full-wave simulation. A prototype of the threeelement array at 1 GHz is fabricated and measured to exhibit a maximum gain of 7.4 dBi with an efficiency of 79.1%. Further, the microstrip ESPAR is thoroughly compared to uniformlyilluminated arrays of similar size. To satisfy the need for higher directivity antennas with inexpensive electronic scanning, the microstrip ESPAR is then integrated as a subarray. The three-element subcell fabrication is simplified to a single layer with an inverted-Y groove in the ground plane, allowing for DC biasing without the need for the radial biasing stubs or tuning stubs found in the two-layer design. The 1 GHz ESPAR array employs a corporate feed network consisting of a Wilkinson power divider with switchable delay line phase shifts, ring hybrid couplers, and achieves a gain of 12.1 dBi at boresight with ±20° scanning and low side lobes. This array successfully illustrates the cost savings associated with ESPAR subarray scanning and the associated reduction in required number of phase shifters in the RF front end

Spartan Daily, February 6, 2014

Volume 142, Issue 5https://scholarworks.sjsu.edu/spartandaily/1465/thumbnail.jp

Ant colony optimisation-based radiation pattern manipulation algorithm for electronically steerable array radiator antennas

A new algorithm for manipulating the radiation pattern of Electronically Steerable Array Radiator Antennas is proposed. A continuous implementation of the Ant Colony Optimisation (ACO) technique calculates the optimal impedance values of reactances loading different parasitic radiators placed in a circle around a centre antenna. By proposing a method to obtain a suitable sampling frequency of the radiation pattern for use in the optimisation algorithm and by transforming the reactance search space into the search space of associated phases, special care was taken to create a fast and reliable implementation, resulting in an approach that is suitable for real-time implementation. The authors compare their approach to analytical techniques and optimisation algorithms for calculating these reactances. Results show that the method is able to calculate near-optimal solutions for gain optimisation and side lobe reduction