7 research outputs found
In vitro corrosion of titanium nitride and oxynitride-based biocompatible coatings deposited on stainless steel
The reactive cathodic arc deposition technique was used to produce Ti nitride and oxynitride
coatings on 304 stainless steel substrates (SS). Both mono (SS/TiN, SS/TiNO) and bilayer coatings
(SS/TiN/TiNO and SS/TiNO/TiN) were investigated in terms of elemental and phase composition,
microstructure, grain size, morphology, and roughness. The corrosion behavior in a solution consisting
of 0.10 M NaCl + 1.96 M H2O2 was evaluated, aiming for biomedical applications. The results showed
that the coatings were compact, homogeneously deposited on the substrate, and displaying rough
surfaces. The XRD analysis indicated that both mono and bilayer coatings showed only cubic phases
with (111) and (222) preferred orientations. The highest crystallinity was shown by the SS/TiN coating,
as indicated also by the largest grain size of 23.8 nm, which progressively decreased to 16.3 nm
for the SS/TiNO monolayer. The oxynitride layers exhibited the best in vitro corrosion resistance
either as a monolayer or as a top layer in the bilayer structure, making them a good candidate for
implant applications
Corrosion improvement of 304l stainless steel by zrsin and zrsi(N,o) mono-and double-layers prepared by reactive cathodic arc evaporation
Zr-based nitrides and oxynitrides were deposited by reactive cathodic arc evaporation in
monolayer and double-layer structures with the aim of increasing the corrosion protection of 304L
stainless steel (SS) in a biomedical aggressive environment. All coatings had a total thickness of
1.2 m. Compared to the bare substrate, the surface roughness of the coated samples was higher,
the presence of microdroplets being revealed by scanning electron micrography (SEM). The X-ray
diffraction investigation of the ZrN phases revealed that the peaks shifted towards lower Bragg
angles and the lattice constants increased as a result of Si and O2 inclusion in ZrN lattice, and of the
ion bombardment characteristic of the cathodic arc method, augmented by the applied bias substrate.
SS/ZrSiN/ZrSi(N,O) showed the best corrosion performance in an acidic environment (0.9% NaCl
and 6% H2O2; pH = 4), which was ascribed to the blocking effect of the interfaces, which acted as a
corrosion barrier for the electrolyte ingress. Moreover, the aforementioned bilayer had the highest
amount of Si and O in the composition of the top layer, forming a stable passive layer with beneficial
effects on corrosion protection
Effects of film thickness of ALD-deposited Al2O3, ZrO2 and HfO2 nano-layers on the corrosion resistance of Ti(N,O)-coated stainless steel
The goal of this stydy was to explore the potential of the enhanced corrosion resistance of Ti(N,O) cathodic arc evaporation-coated 304L stainless steel using oxide nano-layers deposited by atomic layer deposition (ALD). In this study, we deposited Al2O3, ZrO2, and HfO2 nanolayers of two different thicknesses by ALD onto Ti(N,O)-coated 304L stainless steel surfaces. XRD, EDS, SEM, surface profilometry, and voltammetry investigations of the anticorrosion properties of the coated samples are reported. The amorphous oxide nanolayers homogeneously deposited on the sample surfaces exhibited lower roughness after corrosion attack compared to the Ti(N,O)-coated stainless steel. The best corrosion resistance was obtained for the thickest oxide layers. All samples coated with thicker oxide nanolayers augmented the corrosion resistance of the Ti(N,O)-coated stainless steel in a saline, acidic, and oxidising environment (0.9% NaCl + 6% H2O2, pH = 4), which is of interest for building corrosion-resistant housings for advanced oxidation systems such as cavitation and plasma-related electrochemical dielectric barrier discharge for breaking down persistent organic pollutants in water
Removal of Pharmaceutical Residues from Water and Wastewater Using Dielectric Barrier Discharge Methods—A Review
Persistent pharmaceutical pollutants (PPPs) have been identified as potential endocrine disruptors that mimic growth hormones when consumed at nanogram per litre to microgram per litre concentrations. Their occurrence in potable water remains a great threat to human health. Different conventional technologies developed for their removal from wastewater have failed to achieve complete mineralisation. Advanced oxidation technologies such as dielectric barrier discharges (DBDs) based on free radical mechanisms have been identified to completely decompose PPPs. Due to the existence of pharmaceuticals as mixtures in wastewater and the recalcitrance of their degradation intermediate by-products, no single advanced oxidation technology has been able to eliminate pharmaceutical xenobiotics. This review paper provides an update on the sources, occurrence, and types of pharmaceuticals in wastewater by emphasising different DBD configurations previously and currently utilised for pharmaceuticals degradation under different experimental conditions. The performance of the DBD geometries was evaluated considering various factors including treatment time, initial concentration, half-life time, degradation efficiency and the energy yield (G50) required to degrade half of the pollutant concentration. The review showed that the efficacy of the DBD systems on the removal of pharmaceutical compounds depends not only on these parameters but also on the nature/type of the pollutant
Enhancement of the Corrosion Resistance of 304 Stainless Steel by Cr–N and Cr(N,O) Coatings
Chromium nitride and oxynitride coatings were deposited as monolayers ((Cr–N), Cr(N,O)) and bilayers (Cr–N/Cr(N,O), Cr(N,O)/Cr–N) on 304 steel substrates by reactive cathodic arc method. The coatings were characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), surface profilometry, and scratch tester. The anticorrosive properties of the coatings were assessed by electrochemical tests in 0.10 M NaCl + 1.96 M H2O2, carried out at 24 °C. Cr2N, CrN, and Cr(N,O) phases were identified in the coatings by grazing incidence X-ray diffraction (GI-XRD) measurements. The measured adhesion values ranged from 19 N to 35 N, the highest value being obtained for the bilayer with Cr(N,O) on top. Electrochemical tests showed that Cr(N,O) presence in both mono- and bilayered coatings determined the lowest damage in corrosive solution, as compared to the Cr–N coatings. This improvement was ascribed to the more compact structure, lower coatings porosity, and smoother surface
Synthesis and Characterization of Supported TiO2 Based Nano Catalysts and Application for the Removal of Water Contaminants
The occurrence of persistent organic contaminants. [...