The effect of nanodiamonds on candida albicans adhesion and surface characteristics of PMMA denture base material : an in vitro study

Candida albicans is the main causative pathogen of denture stomatitis, which affects many complete denture patients. Objective: To evaluate the effect of different concentrations of nanodiamonds (NDs) added to polymethyl methacrylate (PMMA) denture base material on Candida albicans adhesion as well as on surface roughness and contact angle. Methodology: Acrylic resin specimens sized 10×10×3 mm3 were prepared and divided into four groups (n=30) according to ND concentration (0%, 0.5%, 1%, 1.5% by wt). Surface roughness was measured with a profilometer, and the contact angle with a goniometer. The effect of NDs on Candida albicans adhesion was evaluated using two methods: 1) slide count and 2) direct culture test. Analysis of variance (ANOVA) and Tukey's post hoc test were used in the statistical analyses. Results: Addition of NDs decreased the Candida albicans count significantly more than in the control group (p<0.05), with a lowest of 1% NDs. Addition of NDs also significantly decreased the surface roughness (p<0.05), but the contact angle remained the same. Incorporation of NDs into the PMMA denture base material effectively reduced Candida albicans adhesion and decreased surface roughness. Conclusion: PMMA/NDs composites could be valuable in the prevention of denture stomatitis, which is considered one of the most common clinical problems among removable denture wearers

The effect of nanodiamonds on candida albicans adhesion and surface characteristics of PMMA denture base material - an in vitro study

Candida albicans is the main causative pathogen of denture stomatitis, which affects many complete denture patients. Objective: To evaluate the effect of different concentrations of nanodiamonds (NDs) added to polymethyl methacrylate (PMMA) denture base material on Candida albicans adhesion as well as on surface roughness and contact angle. Methodology: Acrylic resin specimens sized 10×10×3 mm3 were prepared and divided into four groups (n=30) according to ND concentration (0%, 0.5%, 1%, 1.5% by wt). Surface roughness was measured with a profilometer, and the contact angle with a goniometer. The effect of NDs on Candida albicans adhesion was evaluated using two methods: 1) slide count and 2) direct culture test. Analysis of variance (ANOVA) and Tukey’s post hoc test were used in the statistical analyses. Results: Addition of NDs decreased the Candida albicans count significantly more than in the control group (p<0.05), with a lowest of 1% NDs. Addition of NDs also significantly decreased the surface roughness (p<0.05), but the contact angle remained the same. Incorporation of NDs into the PMMA denture base material effectively reduced Candida albicans adhesion and decreased surface roughness. Conclusion: PMMA/NDs composites could be valuable in the prevention of denture stomatitis, which is considered one of the most common clinical problems among removable denture wearers.</p

Differences in COVID-19 Preventive Behavior and Food Insecurity by HIV Status in Nigeria

The aim of the study was to assess if there were signifcant diferences in the adoption of COVID-19 risk preventive behaviors and experience of food insecurity by people living with and without HIV in Nigeria. This was a cross-sectional study that recruited a convenience sample of 4471 (20.5% HIV positive) adults in Nigeria. Binary logistic regression analysis was conducted to test the associations between the explanatory variable (HIV positive and non-positive status) and the outcome variables—COVID-19 related behavior changes (physical distancing, isolation/quarantine, working remotely) and food insecurity (hungry but did not eat, cut the size of meals/skip meals) controlling for age, sex at birth, COVID-19 status, and medical status of respondents. Signifcantly fewer people living with HIV (PLWH) reported a positive COVID-19 test result; and had lower odds of practicing COVID-19 risk preventive behaviors. In comparison with those living without HIV, PLWH had higher odds of cutting meal sizes as a food security measure (AOR: 3.18; 95% CI 2.60–3.88) and lower odds of being hungry and not eating (AOR: 0.24; 95% CI 0.20–0.30). In conclusion, associations between HIV status, COVID-19 preventive behaviors and food security are highly complex and warrant further in-depth to unravel the incongruities identifed

Factors associated with financial security, food security and quality of daily lives of residents in Nigeria during the first wave of the COVID-19 pandemic

An online survey was conducted to identify factors associated with financial insecurity, food insecurity and poor quality of daily lives of adults in Nigeria during the first wave of the COVID-19 pandemic. The associations between the outcome (experience of financial loss, changes in food intake and impact of the pandemic on daily lives) and the explanatory (age, sex, education level, anxiety, depression, HIV status) variables were determined using logistic regression analysis. Of the 4439 respondents, 2487 (56.0%) were financially insecure, 907 (20.4%) decreased food intake and 4029 (90.8%) had their daily life negatively impacted. Males (AOR:0.84), people who felt depressed (AOR:0.62) and people living with HIV -PLHIV- (AOR:0.70) had significantly lower odds of financial insecurity. Older respondents (AOR:1.01) had significantly higher odds of financial insecurity. Those depressed (AOR:0.62) and PLHIV (AOR:0.55) had significantly lower odds of reporting decreased food intake. Respondents who felt anxious (AOR:0.07), depressed (AOR: 0.48) and who were PLHIV (AOR:0.68) had significantly lower odds of reporting a negative impact of the pandemic on their daily lives. We concluded the study findings may reflect a complex relationship between financial insecurity, food insecurity, poor quality of life, mental health, and socioeconomic status of adults living in Nigeria during the COVID-19 pandemic

Teledentistry from research to practice: a tale of nineteen countries

AimThe COVID-19 pandemic has accelerated teledentistry research with great interest reflected in the increasing number of publications. In many countries, teledentistry programs were established although not much is known about the extent of incorporating teledentistry into practice and healthcare systems. This study aimed to report on policies and strategies related to teledentistry practice as well as barriers and facilitators for this implementation in 19 countries.MethodsData were presented per country about information and communication technology (ICT) infrastructure, income level, policies for health information system (HIS), eHealth and telemedicine. Researchers were selected based on their previous publications in teledentistry and were invited to report on the situation in their respective countries including Bosnia and Herzegovina, Canada, Chile, China, Egypt, Finland, France, Hong Kong SAR, Iran, Italy, Libya, Mexico, New Zealand, Nigeria, Qatar, Saudi Arabia, South Africa, United Kingdom, Zimbabwe.ResultsTen (52.6%) countries were high income, 11 (57.9%) had eHealth policies, 7 (36.8%) had HIS policies and 5 (26.3%) had telehealth policies. Six (31.6%) countries had policies or strategies for teledentistry and no teledentistry programs were reported in two countries. Teledentistry programs were incorporated into the healthcare systems at national (n = 5), intermediate (provincial) (n = 4) and local (n = 8) levels. These programs were established in three countries, piloted in 5 countries and informal in 9 countries.ConclusionDespite the growth in teledentistry research during the COVID-19 pandemic, the use of teledentistry in daily clinical practice is still limited in most countries. Few countries have instituted teledentistry programs at national level. Laws, funding schemes and training are needed to support the incorporation of teledentistry into healthcare systems to institutionalize the practice of teledentistry. Mapping teledentistry practices in other countries and extending services to under-covered populations increases the benefit of teledentistry

Factors associated with COVID-19 pandemic induced post-traumatic stress symptoms among adults living with and without HIV in Nigeria: a cross-sectional study

Background: Nigeria is a country with high risk for traumatic incidences, now aggravated by the COVID-19 pandemic. This study aimed to identify differences in COVID-19 related post-traumatic stress symptoms (PTSS) among people living and not living with HIV; to assess whether PTSS were associated with COVID-19 pandemic-related anger, loneliness, social isolation, and social support; and to determine the association between PTSS and use of COVID-19 prevention strategies.Methods: The data of the 3761 respondents for this analysis was extracted from a cross-sectional online survey that collected information about mental health and wellness from a convenience sample of adults, 18 years and above, in Nigeria from July to December 2020. Information was collected on the study's dependent variable (PTSS), independent variables (self-reported COVID-19, HIV status, use of COVID-19 prevention strategies, perception of social isolation, access to emotional support, feelings of anger and loneliness), and potential confounder (age, sex at birth, employment status). A binary logistic regression model tested the associations between independent and dependent variables.Results: Nearly half (47.5%) of the respondents had PTSS. People who had symptoms but were not tested (AOR = 2.20), felt socially isolated (AOR = 1.16), angry (AOR = 2.64), or lonely (AOR = 2.19) had significantly greater odds of reporting PTSS (p p Conclusion: The present study identified some multifaceted relationships between post-traumatic stress, HIV status, facemask use, anger, loneliness, social isolation, and access to emotional support during this protracted COVID-19 pandemic. These findings have implications for the future health of those affected, particularly for individuals living in Nigeria. Public health education should be incorporated in programs targeting prevention and prompt diagnosis and treatment for post-traumatic stress disorder at the community level.</p

Effect of CAD/CAM Ceramic Thickness on Shade Masking Ability of Discolored Teeth: In Vitro Study

Shade matching is a common challenge that dentists face during fabrication of esthetic dental restoration. Thus, the aim of the current study was to assess the masking ability of two types of CAD/CAM ceramics for gaining high esthetic prosthesis. This in vitro study used a total sample size of 66 lithium disilicate (LD) and leucite reinforced (LR) CAD/CAM ceramics sub-grouped into three thicknesses: 0.5, 1, and 1.5 mm. Nine shades of natural dentin die materials were prepared as a replica of the underlying tooth structure. The difference in color (&Delta;E) and translucency parameter (TP) were assessed for both tested ceramics at the three thicknesses. One-way ANOVA was performed to compare the three thicknesses of each ceramic, followed by multiple pairwise comparisons between both ceramics. LR had significantly higher &Delta;E than LD at all thicknesses used unlike the case in TP. Thickness of 0.5 mm exhibited the highest &Delta;E and TP, while 1.5 mm thickness showed the lowest &Delta;E and TP in both ceramics. Increase in ceramic thickness had a great impact on both color masking ability of the underlying tooth structure and its translucency. The higher the ceramic thickness, the better the masking ability and the lower the translucency was reported

Assessment of color stability and translucency of various CAD/CAM ceramics of different compositions and Thicknesses: An in vitro study

Background: Translucency and optical characteristics significantly affect the aesthetics of ceramic restorations. The introduction of new virgilite crystals to novel ceramic advanced lithium disilicate through a matrix firing process enhances the material’s strength and aesthetic quality according to the manufacturer. Materials and Methods: Four types of CAD/CAM ceramics; lithium disilicate (LD), leucite reinforced (LR), advanced lithium disilicate (ALD), and zirconia-reinforced lithium silicate (ZLS) exposed to different staining solutions (tea, cola, coffee, and distilled water). Each ceramic type had 120 specimens, divided into subgroups based on thickness (0.5 mm, 1 mm, and 1.5 mm). Color changes (ΔE00) and translucency parameters (TP00) were measured after thermocycling, and spectrophotometry was employed to evaluate ΔE00 and TP00 after 1, 7, and 30 days of exposure to the staining solutions. Results: ZLS exhibited the lowest color stability, while lithium LD and ALD displayed the highest. Thickness significantly affected color stability, with 0.5 mm thickness showing the least change. The duration of exposure also impacted color changes, with 30 days causing the most significant shift. LD demonstrated the highest translucency. Coffee and tea induced more pronounced reductions in translucency and color stability compared to the control group. Conclusions: Material structure, thickness, staining solution, and exposure duration significantly influenced the color stability and translucency of CAD/CAM ceramics, with LD and ALD demonstrating superior color stability and LD exhibiting the highest translucency

Influences of Different CAD/CAM Ceramic Compositions and Thicknesses on the Mechanical Properties of Ceramic Restorations: An In Vitro Study

The aim of this study was to assess the influences of different CAD/CAM ceramic compositions and thicknesses on the surface roughness and hardness of ceramic restorations. Four different ceramics were used in the current study: lithium disilicate (LD), leucite reinforced (LE), advanced lithium disilicate (ALD), and zirconia-reinforced lithium silicate (ZLS). Each group included 30 specimens subdivided into three different ceramic thicknesses (0.5, 1 and 1.5 mm thicknesses). The microhardness was measured for all the specimens using a microhardness testing machine, while the surface roughness was measured using a non-contact optical profilometer at three intervals (before toothbrushing and after toothbrushing, with and without toothpaste). Three-way and two-way ANOVA were used to determine the factors influencing the surface roughness and microhardness. There was a significant difference in the surface roughness between the studied groups for all the thicknesses. The findings showed that ALD had the lowest surface roughness, while ZLS showed the highest surface roughness. Moreover, ALD, followed by ZLS, had the highest hardness, while LD and LE had the lowest hardness values. Regarding the thicknesses, both the 0.5 and 1 mm ceramic thicknesses showed a significantly lower surface roughness than the 1.5 mm thickness, while the 1.5 mm thickness showed a significantly higher microhardness than the 0.5 mm thickness. The surface roughness and hardness were significantly affected by the ceramic composition and type of filler. It is recommended to use 1.5 mm-thick ceramic materials for the fabrication of definitive full-coverage ceramic restorations, while veneers require 0.5 mm-thick materials. ALD is a promising CAD/CAM material that can be used for the fabrication of restorations with a proper strength in both anterior and posterior regions