Glass and glass-ceramic from basic oxygen furnace (BOF) slag

A method is presented to produce glass-ceramics from a BOF slag glass containing a high amount of iron. The composition design of these unusual glasses, their melting and crystallization behavior, their crystal nucleation kinetics and the micro structures resulting from different thermal treatments are analyzed and discussed. Several compositions were tested, varying the proportions of slag, sand and Na2CO3 in the batch. A batch with a composition (in wt%) of 60 slag, 35 sand, 5 Na2O showed good vitrificability and displayed bulk crystallization after thermal treatment, and was therefore chosen for a more detailed study. Crystallized materials with nanometric microstructures were obtained using suitable treatments. Fracture strength, hardness and chemical resistance tests were performed. A product with fine volumetric crystallization, a high degree of crystallization, having marble-like appearance, improved mechanical strength and suitable chemical durability was obtained. The material may be suitable for floor and wall tile applications in the construction industry

SEM and AFM characterization of surface of two RMGICs for degradation before and after modification with bioactive glass ceramic

“This is an Accepted Manuscript of an article published by Taylor & Francis Group in Journal of Adhesion Science and Technology on 09/12/2015, available online: http://www.tandfonline.com/10.1080/01694243.2015.1115603."Objectives: The aim of this study was to evaluate the effect of bioactive glass–ceramic particles (Biosilicate®) addition on surface nanoroughness and topography of Resin-modified glass ionomer cements (RMGICs).Methods: Experimental materials were made by incorporating 2 wt% of Biosilicate® into Fuji II LC® (FL) and Vitremer® (VT) powders. Disks of RMGICs (with and without Biosilicate®) measuring 0.5 cm (diameter) × 0.5 mm (thickness) were fabricated and polished. Samples were stored at 37 °C in dry or immersed in distilled water for 30 days. Digital images (20 × 20 μm) from the surfaces were obtained by means of an atomic force microscopy. Three images were acquired for each sample, and four nanoroughness measurements were performed in each image. Nanoroughness (Ra, nm) was assessed by Nanoscope Software V7. Data were analyzed with ANOVA and Student–Newman–Keuls multiple comparisons (p < 0.05). SEM images were obtained for surface topography analysis.Results: FL was significantly rougher than VT (p < 0.05) in wet and dry conditions. The addition of Biosilicate® increased the surface roughness in VT and decreased in FL, regardless of the storage media (p ≤ 0.05). No differences existed between materials and storage conditions after Biosilicate® addition. Significance: The Biosilicate® particles addition produced changes on the surface nanoroughness of the RMGICs. These changes depended on the particles size of the original cements in dry conditions. In water storage, dissolution of the Biosilicate® particles, a silica-rich gel formation, and a hydroxyl carbonate apatite precipitation on the surface of the materials changed the nanoroughness surface. FL was the roughest in both conditions.Significance: The Biosilicate® particles addition produced changes on the surface nanoroughness of the RMGICs. These changes depended on the particles size of the original cements in dry conditions. In water storage, dissolution of the Biosilicate® particles, a silica-rich gel formation, and a hydroxyl carbonate apatite precipitation on the surface of the materials changed the nanoroughness surface. FL was the roughest in both conditions.MINECO/FEDERMAT2014-52036-P

Accumulating Variation at Conserved Sites in Potyvirus Genomes Is Driven by Species Discovery and Affects Degenerate Primer Design

Unknown and foreign viruses can be detected using degenerate primers targeted at conserved sites in the known viral gene sequences. Conserved sites are found by comparing sequences and so the usefulness of a set of primers depends crucially on how well the known sequences represent the target group including unknown sequences. Methodology/Principal Findings: We developed a method for assessing the apparent stability of consensus sequences at sites over time using deposition dates from Genbank. We tested the method using 17 conserved sites in potyvirus genomes. The accumulation of knowledge of sequence variants over 20 years caused ‘consensus decay ’ of the sites. Rates of decay were rapid at all sites but varied widely and as a result, the ranking of the most conserved sites changed. The discovery and reporting of sequences from previously unknown and distinct species, rather than from strains of known species, dominated the decay, indicating it was largely a sampling effect related to the progressive discovery of species, and recent virus mutation was probably only a minor contributing factor. Conclusion/Significance: We showed that in the past, the sampling bias has misled the choice of the most conserved target sites for genus specific degenerate primers. The history of sequence discoveries indicates primer designs should be update

First Dating of a Recombination Event in Mammalian Tick-Borne Flaviviruses

The mammalian tick-borne flavivirus group (MTBFG) contains viruses associated with important human and animal diseases such as encephalitis and hemorrhagic fever. In contrast to mosquito-borne flaviviruses where recombination events are frequent, the evolutionary dynamic within the MTBFG was believed to be essentially clonal. This assumption was challenged with the recent report of several homologous recombinations within the Tick-borne encephalitis virus (TBEV). We performed a thorough analysis of publicly available genomes in this group and found no compelling evidence for the previously identified recombinations. However, our results show for the first time that demonstrable recombination (i.e., with large statistical support and strong phylogenetic evidences) has occurred in the MTBFG, more specifically within the Louping ill virus lineage. Putative parents, recombinant strains and breakpoints were further tested for statistical significance using phylogenetic methods. We investigated the time of divergence between the recombinant and parental strains in a Bayesian framework. The recombination was estimated to have occurred during a window of 282 to 76 years before the present. By unravelling the temporal setting of the event, we adduce hypotheses about the ecological conditions that could account for the observed recombination