59 research outputs found

    Complex anisotropy beneath the Peruvian flat slab from frequency-dependent, multiple-phase shear wave splitting analysis

    Get PDF
    Flat or shallow subduction is a relatively widespread global occurrence, but the dynamics remain poorly understood. In particular, the interaction between flat slabs and the surrounding mantle flow has yet to be studied in detail. Here we present measurements of seismic anisotropy to investigate mantle flow beneath the Peruvian flat-slab segment, the largest present-day region of flat subduction. We conduct a detailed shear wave splitting analysis at a long-running seismic station (NNA) located near Lima, Peru. We present measurements of apparent splitting parameters (fast direction ? and delay time ?t) for SKS, ScS, and local S phases from 80 events. We observe well-defined frequency dependence and backazimuthal variability, indicating the likely presence of complex anisotropy. Forward modeling the observations with two or three layers of anisotropy reveals a likely layer with a trench-normal fast direction underlying a layer with a more trench-oblique (to trench-subparallel) fast direction. In order to further constrain the anisotropic geometry, we analyzed the source-side splitting from events originating within the slab measured at distant stations. Beneath the flat-slab segment, we found trench-normal fast splitting directions in the subslab mantle, while within the dipping portion of the slab further to the east, likely trench-subparallel anisotropy within the slab itself. This subslab pattern contradicts observations from elsewhere in South America for “normal” (i.e., more steeply dipping) slab conditions. It is similar, however, to inferences from other shallowly dipping subduction zones around the world. While there is an apparent link between slab dip and the surrounding mantle flow, at least beneath Peru, the precise nature of the relationship remains to be clarified

    Quasi-Love wave scattering reveals tectonic history of Australia and its margins reflected by mantle anisotropy

    Get PDF
    The Australian continental crust preserves a rich geological history, but it is unclear to what extent this history is expressed deeper within the mantle. Here an investigation of Quasi-Love waves is performed to detect scattering of seismic surface waves at mantle depths (between 100–200 km) by lateral gradients in seismic anisotropy. Across Australasia 275 new observations of Quasi-Love waves are presented. The inferred scattering source and lateral anisotropic gradients are preferentially located either near the passive continental margins, or near the boundaries of major geological provinces within Australia. Pervasive fossilized lithospheric anisotropy within the continental interior is implied, on a scale that mirrors the crustal geology at the surface, and a strong lithosphere that has preserved this signal over billions of years. Along the continental margins, lateral anisotropic gradients may indicate either the edge of the thick continental lithosphere, or small-scale dynamic processes in the asthenosphere below

    Lithospheric cooling trends and deviations in oceanic PP‐P and SS‐S differential traveltimes

    Full text link
    Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/97534/1/jgrb50092.pd

    Characterizing the cover across South Australia: a simple passive-seismic method for estimating sedimentary thickness

    Get PDF
    A blanket of sedimentary and regolith material covers approximately three-quarters of the Australian continent, obscuring the crustal geology below and potential mineral resources within. Sedimentary basins also trap seismic energy increasing seismic hazard and generating noisy seismograms that make determining deeper crustal and lithospheric structure more challenging. The most fundamental question that can first be asked in addressing these challenges is how thick are the sediments? Borehole drilling and active seismic experiments using a controlled seismic source (e.g. vibroseis) provide excellent constraints, but they are limited in geographical coverage due to their expense, especially when operating in remote areas. On the other hand, passive-seismic experiments that involve the deployment of seismic receivers only (i.e. seismometers) are relatively low-cost and portable, providing a practical alternative for initial surveys. Here we utilize receiver functions obtained for both temporary and permanent seismic stations in South Australia, covering regions with a diverse sediment distribution. We present a straightforward method to determine the basement depth based on the arrival time of the P-converted-to-S phase generated at the boundary between the crustal basement and sedimentary strata above. Utilizing the available borehole data, we establish a simple predictive relationship between Ps arrival time and the basement depth, which could then be applied to other sedimentary basins with some consideration. The method is found to work best for Phanerozoic sediments and offers a way to determine the sediment–basement interface in unexplored areas requiring only temporary seismic stations deployed for < 6 months.We acknowledge the traditional custodians of South Australia on whose land the seismic stations were deployed. SA and CE are supported by Australian Research Council grant DE19010006

    The Role of Oceanic Transform Faults in Seafloor Spreading: A Global Perspective From Seismic Anisotropy

    Get PDF
    Mantle anisotropy beneath mid-ocean ridges and oceanic transforms is key to our understanding of seafloor spreading and underlying dynamics of divergent plate boundaries. Observations are sparse, however, given the remoteness of the oceans and the difficulties of seismic instrumentation. To overcome this, we utilize the global distribution of seismicity along transform faults to measure shear wave splitting of over 550 direct S phases recorded at 56 carefully selected seismic stations worldwide. Applying this source-side splitting technique allows for characterization of the upper mantle seismic anisotropy, and therefore the pattern of mantle flow, directly beneath seismically active transform faults. The majority of the results (60%) return nulls (no splitting), while the non-null measurements display clear azimuthal dependency. This is best simply explained by anisotropy with a near vertical symmetry axis, consistent with mantle upwelling beneath oceanic transforms as suggested by numerical models. It appears therefore that the long-term stability of seafloor spreading may be associated with widespread mantle upwelling beneath the transforms creating warm and weak faults that localize strain to the plate boundary.We acknowledge funding from the Natural Environment Research Council (NE/M003507/1 and NE/K010654/1) and the European Research Council (GA 638665

    Response of the mantle to flat slab evolution: Insights from local S splitting beneath Peru

    Get PDF
    The dynamics of flat subduction, particularly the interaction between a flat slab and the overriding plate, are poorly understood. Here we study the (seismically) anisotropic properties and deformational regime of the mantle directly above the Peruvian flat slab. We analyze shear wave splitting from 370 local S events at 49 stations across southern Peru. We find that the mantle above the flat slab appears to be anisotropic, with modest average delay times (~0.28 s) that are consistent with ~4% anisotropy in a ~30 km thick mantle layer. The most likely mechanism is the lattice-preferred orientation of olivine, which suggests that the observed splitting pattern preserves information about the mantle deformation. We observe a pronounced change in anisotropy along strike, with predominately trench-parallel fast directions in the north and more variable orientations in the south, which we attribute to the ongoing migration of the Nazca Ridge through the flat slab system

    SKS Splitting Beneath Mount St. Helens: Constraints on Subslab Mantle Entrainment

    Get PDF
    Observations of seismic anisotropy can provide direct constraints on the character of mantleflow in subduction zones, critical for our broader understanding of subduction dynamics. Here wepresent over 750 new SKS splitting measurements in the vicinity of Mount St. Helens in the Cascadiasubduction zone using a combination of stations from the iMUSH broadband array and Cascades VolcanoObservatory network. This provides the highest density of splitting measurements yet available inCascadia, acting as a focused“telescope”for seismic anisotropy in the subduction zone. We retrieve spatiallyconsistent splitting parameters (mean fast directionΦ: 74°, mean delay time∂t: 1.0 s) with the azimuthaloccurrence of nulls in agreement with the fast direction of splitting. When averaged across the array, a90° periodicity in splitting parameters as a function of back azimuth is revealed, which has not beenrecovered previously with single‐station observations. The periodicity is characterized by a sawtooth patterninΦwith a clearly defined 45° trend. We present new equations that reproduce this behavior based uponknown systematic errors when calculating shear wave splitting from data with realistic seismic noise.The corrected results suggest a single layer of anisotropy with an ENE‐WSW fast axis parallel to the motionof the subducting Juan de Fuca plate; in agreement with predictions for entrained subslab mantleflow. Thesplitting pattern is consistent with that seen throughout Cascadia, suggesting that entrainment of theunderlying asthenosphere with the subducting slab is coherent and widespread.The broadband seismic component of the iMUSH project was supported by National Science Foundation grants EAR‐1144568, EAR‐1144351, EAR‐1460291, and EAR‐1444275. CME acknowledges support from the Australian Research Council (DE190100062). We thank the 2017 IRIS undergraduate summer intern program for providing support to A. W. to work with E. A. W. at the University of Washington. The facilities of IRIS Data Services, and specifically the IRIS Data Management Center, were used for access to waveforms, related metadata, and/or derived products used in this study. IRIS Data Services are funded through the Seismological Facilities for the Advancement of Geoscience and EarthScope (SAGE) Proposal of the National Science Foundation under Cooperative Agreement EAR‐1261681

    Response of the mantle to flat slab evolution: Insights from local splitting beneath Peru

    Get PDF
    The dynamics of flat subduction, particularly the interaction between a flat slab and the overriding plate, are poorly understood. Here we study the (seismically) anisotropic properties and deformational regime of the mantle directly above the Peruvian flat slab. We analyze shear wave splitting from 370 local S events at 49 stations across southern Peru. We find that the mantle above the flat slab appears to be anisotropic, with modest average delay times (~0.28?s) that are consistent with ~4% anisotropy in a ~30?km thick mantle layer. The most likely mechanism is the lattice-preferred orientation of olivine, which suggests that the observed splitting pattern preserves information about the mantle deformation. We observe a pronounced change in anisotropy along strike, with predominately trench-parallel fast directions in the north and more variable orientations in the south, which we attribute to the ongoing migration of the Nazca Ridge through the flat slab system

    Overriding plate, mantle wedge, slab, and subslab contributions to seismic anisotropy beneath the northern Central Andean Plateau

    Get PDF
    The Central Andean Plateau, the second-highest plateau on Earth, overlies the subduction of the Nazca Plate beneath the central portion of South America. The origin of the high topography remains poorly understood, and this puzzle is intimately tied to unanswered questions about processes in the upper mantle, including possible removal of the overriding plate lithosphere and interaction with the flow field that results from the driving forces associated with subduction. Observations of seismic anisotropy can provide important constraints on mantle flow geometry in subduction systems. The interpretation of seismic anisotropy measurements in subduction settings can be challenging, however, because different parts of the subduction system may contribute, including the overriding plate, the mantle wedge above the slab, the slab itself, and the deep upper mantle beneath the slab. Here we present measurements of shear wave splitting for core phases (SKS, SKKS, PKS, and sSKS), local S, and source-side teleseismic S phases that sample the upper mantle beneath southern Peru and northern Bolivia, relying mostly on data from the CAUGHT experiment. We find evidence for seismic anisotropy within most portions of the subduction system, although the overriding plate itself likely makes only a small contribution to the observed delay times. Average fast orientations generally trend roughly trench-parallel to trench-oblique, contradicting predictions from the simplest two-dimensional flow models and olivine fabric scenarios. Our measurements suggest complex, layered anisotropy beneath the northern portion of the Central Andean Plateau, with significant departures from a two-dimensional mantle flow regime

    Transformation in governance towards resilient food systems

    Get PDF
    The dynamics of systemic societal transformations are not well understood, and the extent to which such transformations can be governed is contested. This research paper is the result of a joint effort among a small group of researchers to identify pathways for transformation towards sustainable food systems, which are resilient towards shocks and towards climate change in particular. Using empirical studies, both transformations in governance systems and governance of transformations were investigated. These cases served as a preliminary analysis to identify some of the trends and patterns that warrant further investigation. Not surprisingly, transformational change in food systems is often triggered by a shock to the system, or by increasing pressure to that system. But that alone is not enough to bring about a transformation. A number of preconditions and conditions need to be present including sufficient ‘wealth’ or economic and social capital in the system with resources that can be mobilized, and sufficient flexibility in the institutional context to allow innovation to emerge and gain strength. A particular area of interest that appears to stimulate transformations is collective action, which often involves collaboration across geographical scales and interest groups. The outcomes of transformations are complex and typically multifaceted, and can take years to emerge. However, broadly speaking, the cases explored demonstrate that governance is central to food system transformation both in terms of pre-conditions and provoking processes as well as in the outcomes of the transformation itself. Food system transformations in general appear to entail fundamental shifts in social relations and institutions – in other words, the governance of the food system
    corecore