Study of the lineshape of the chi(c1) (3872) state

A study of the lineshape of the chi(c1) (3872) state is made using a data sample corresponding to an integrated luminosity of 3 fb(-1) collected in pp collisions at center-of-mass energies of 7 and 8 TeV with the LHCb detector. Candidate chi(c1)(3872) and psi(2S) mesons from b-hadron decays are selected in the J/psi pi(+)pi(-) decay mode. Describing the lineshape with a Breit-Wigner function, the mass splitting between the chi(c1 )(3872) and psi(2S) states, Delta m, and the width of the chi(c1 )(3872) state, Gamma(Bw), are determined to be (Delta m=185.598 +/- 0.067 +/- 0.068 Mev,)(Gamma BW=1.39 +/- 0.24 +/- 0.10 Mev,) where the first uncertainty is statistical and the second systematic. Using a Flatte-inspired model, the mode and full width at half maximum of the lineshape are determined to be (mode=3871.69+0.00+0.05 MeV.)(FWHM=0.22-0.04+0.13+0.07+0.11-0.06-0.13 MeV, ) An investigation of the analytic structure of the Flatte amplitude reveals a pole structure, which is compatible with a quasibound D-0(D) over bar*(0) state but a quasivirtual state is still allowed at the level of 2 standard deviations

Measurement of the CKM angle γγ in B±→DK±B^\pm\to D K^\pm and B±→Dπ±B^\pm \to D π^\pm decays with D→KS0h+h−D \to K_\mathrm S^0 h^+ h^-

A measurement of $CP$-violating observables is performed using the decays $B^\pm\to D K^\pm$ and $B^\pm\to D \pi^\pm$, where the $D$ meson is reconstructed in one of the self-conjugate three-body final states $K_{\mathrm S}\pi^+\pi^-$ and $K_{\mathrm S}K^+K^-$ (commonly denoted $K_{\mathrm S} h^+h^-$). The decays are analysed in bins of the $D$-decay phase space, leading to a measurement that is independent of the modelling of the $D$-decay amplitude. The observables are interpreted in terms of the CKM angle $\gamma$. Using a data sample corresponding to an integrated luminosity of $9\,\text{fb}^{-1}$ collected in proton-proton collisions at centre-of-mass energies of $7$, $8$, and $13\,\text{TeV}$ with the LHCb experiment, $\gamma$ is measured to be $\left(68.7^{+5.2}_{-5.1}\right)^\circ$. The hadronic parameters $r_B^{DK}$, $r_B^{D\pi}$, $\delta_B^{DK}$, and $\delta_B^{D\pi}$, which are the ratios and strong-phase differences of the suppressed and favoured $B^\pm$ decays, are also reported

Helium identification with LHCb

The identification of helium nuclei at LHCb is achieved using a method based on measurements of ionisation losses in the silicon sensors and timing measurements in the Outer Tracker drift tubes. The background from photon conversions is reduced using the RICH detectors and an isolation requirement. The method is developed using pp collision data at √(s) = 13 TeV recorded by the LHCb experiment in the years 2016 to 2018, corresponding to an integrated luminosity of 5.5 fb-1. A total of around 105 helium and antihelium candidates are identified with negligible background contamination. The helium identification efficiency is estimated to be approximately 50% with a corresponding background rejection rate of up to O(10^12). These results demonstrate the feasibility of a rich programme of measurements of QCD and astrophysics interest involving light nuclei

Measurement of forward charged hadron flow harmonics in peripheral PbPb collisions at √sNN = 5.02 TeV with the LHCb detector

Flow harmonic coefficients, v n , which are the key to studying the hydrodynamics of the quark-gluon plasma (QGP) created in heavy-ion collisions, have been measured in various collision systems and kinematic regions and using various particle species. The study of flow harmonics in a wide pseudorapidity range is particularly valuable to understand the temperature dependence of the shear viscosity to entropy density ratio of the QGP. This paper presents the first LHCb results of the second- and the third-order flow harmonic coefficients of charged hadrons as a function of transverse momentum in the forward region, corresponding to pseudorapidities between 2.0 and 4.9, using the data collected from PbPb collisions in 2018 at a center-of-mass energy of 5.02 TeV . The coefficients measured using the two-particle angular correlation analysis method are smaller than the central-pseudorapidity measurements at ALICE and ATLAS from the same collision system but share similar features

Curvature-bias corrections using a pseudomass method

Momentum measurements for very high momentum charged particles, such as muons from electroweak vector boson decays, are particularly susceptible to charge-dependent curvature biases that arise from misalignments of tracking detectors. Low momentum charged particles used in alignment procedures have limited sensitivity to coherent displacements of such detectors, and therefore are unable to fully constrain these misalignments to the precision necessary for studies of electroweak physics. Additional approaches are therefore required to understand and correct for these effects. In this paper the curvature biases present at the LHCb detector are studied using the pseudomass method in proton-proton collision data recorded at centre of mass energy √(s)=13 TeV during 2016, 2017 and 2018. The biases are determined using Z→μ + μ - decays in intervals defined by the data-taking period, magnet polarity and muon direction. Correcting for these biases, which are typically at the 10-4 GeV-1 level, improves the Z→μ + μ - mass resolution by roughly 18% and eliminates several pathological trends in the kinematic-dependence of the mean dimuon invariant mass

Study of CP violation in B0 → DK⋆(892)0 decays with D → Kπ(ππ), ππ(ππ), and KK final states

A measurement of CP-violating observables associated with the interference of B0 → D0K⋆ (892)0 and B0 → D¯ 0K⋆ (892)0 decay amplitudes is performed in the D0 → K∓π ±(π +π −), D0 → π +π −(π +π −), and D0 → K+K− fnal states using data collected by the LHCb experiment corresponding to an integrated luminosity of 9 fb−1 . CP-violating observables related to the interference of B0 s → D0K¯ ⋆ (892)0 and B0 s → D¯ 0K¯ ⋆ (892)0 are also measured, but no evidence for interference is found. The B0 observables are used to constrain the parameter space of the CKM angle γ and the hadronic parameters r DK⋆ B0 and δ DK⋆ B0 with inputs from other measurements. In a combined analysis, these measurements allow for four solutions in the parameter space, only one of which is consistent with the world average

Study of the doubly charmed tetraquark T+cc

Quantum chromodynamics, the theory of the strong force, describes interactions of coloured quarks and gluons and the formation of hadronic matter. Conventional hadronic matter consists of baryons and mesons made of three quarks and quark-antiquark pairs, respectively. Particles with an alternative quark content are known as exotic states. Here a study is reported of an exotic narrow state in the D0D0π+ mass spectrum just below the D*+D0 mass threshold produced in proton-proton collisions collected with the LHCb detector at the Large Hadron Collider. The state is consistent with the ground isoscalar T+cc tetraquark with a quark content of ccu⎯⎯⎯d⎯⎯⎯ and spin-parity quantum numbers JP = 1+. Study of the DD mass spectra disfavours interpretation of the resonance as the isovector state. The decay structure via intermediate off-shell D*+ mesons is consistent with the observed D0π+ mass distribution. To analyse the mass of the resonance and its coupling to the D*D system, a dedicated model is developed under the assumption of an isoscalar axial-vector T+cc state decaying to the D*D channel. Using this model, resonance parameters including the pole position, scattering length, effective range and compositeness are determined to reveal important information about the nature of the T+cc state. In addition, an unexpected dependence of the production rate on track multiplicity is observed

Stability And Numerical Results For A Thermoelastic Joint-Leg-Beam System

Rigidizable/Inflatable (RI) materials offer the possibility of deployable large space structures5 and so are of interest in applications where large optical or RF apertures are needed. In particular, in recent years there has been renewed interest in inflatable-rigidizable truss structures because of the efficiency they offer in packaging during boost-to-orbit. However, much research is still needed to better understand dynamic response characteristics, including inherent damping, of truss structures fabricated with these advanced material systems. One of the most important characteristics of such space systems is their response to changing thermal loads, as they move in/out of the Earth’s shadow. We study the thermoelastic behaviour of a basic truss component consisting of two RI beams connected through a joint subject to solar heating.5 and so are of interest in applications where large optical or RF apertures are needed. In particular, in recent years there has been renewed interest in inflatable-rigidizable truss structures because of the efficiency they offer in packaging during boost-to-orbit. However, much research is still needed to better understand dynamic response characteristics, including inherent damping, of truss structures fabricated with these advanced material systems. One of the most important characteristics of such space systems is their response to changing thermal loads, as they move in/out of the Earth’s shadow. We study the thermoelastic behaviour of a basic truss component consisting of two RI beams connected through a joint subject to solar heating.Fil: Cliff, E.M.. Interdisciplinary Center for Applied Mathematics Virginia Tech; Estados UnidosFil: Liu, Z.. University of Minnesota at Duluth; Estados UnidosFil: Spies, Ruben Daniel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Matemática Aplicada del Litoral. Universidad Nacional del Litoral. Instituto de Matemática Aplicada del Litoral; Argentin

A Model for the Thermoelastic Behavior of a Joint-Leg-Beam System for Space Applications

Rigidizable-Inflatable (RI) materials offer the possibility of deployable large space structures (C.H.M. Jenkins (ed.), Gossamer Spacecraft: Membrane and Inflatable Structures Technology for Space Applications, Progress in Aeronautics and Astronautics, 191, AIAA Pubs., 2001) and so are of interest in applications where large optical or RF apertures are needed. In particular, in recent years there has been renewed interest in inflatablerigidizable truss-structures because of the efficiency they offer in packaging during boost-to-orbit. However, much research is still needed to better understand dynamic response characteristics, including inherent damping, of truss structures fabricated with these advanced material systems. One of the most important characteristics of such space systems is their response to changing thermal loads, as they move in and out of the Earth?s shadow. We study a model for the thermoelastic behavior of a basic truss componentconsisting of two RI beams connected through a joint subject to solar heating. Axial and transverse motions as well as thermal response of the beams with thermoelastic damping are taking into account. The model results in a couple PDE-ODE system. Well-posedness and stability results are shown and analyzed.Fil: Cliff, E.M.. Virginia Polytechnic Institute and State University; Estados UnidosFil: Liu, Z.. University of Minnesota Duluth; Estados UnidosFil: Spies, Ruben Daniel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Matemática Aplicada del Litoral. Universidad Nacional del Litoral. Instituto de Matemática Aplicada del Litoral; Argentin