56 research outputs found
The HPS electromagnetic calorimeter
The Heavy Photon Search experiment (HPS) is searching for a new gauge boson, the so-called “heavy photon.” Through its kinetic mixing with the Standard Model photon, this particle could decay into an electron-positron pair. It would then be detectable as a narrow peak in the invariant mass spectrum of such pairs, or, depending on its lifetime, by a decay downstream of the production target. The HPS experiment is installed in Hall-B of Jefferson Lab. This article presents the design and performance of one of the two detectors of the experiment, the electromagnetic calorimeter, during the runs performed in 2015–2016. The calorimeter's main purpose is to provide a fast trigger and reduce the copious background from electromagnetic processes through matching with a tracking detector. The detector is a homogeneous calorimeter, made of 442 lead-tungstate (PbWO4) scintillating crystals, each read out by an avalanche photodiode coupled to a custom trans-impedance amplifier
Sound archaeology: terminology, Palaeolithic cave art and the soundscape
This article is focused on the ways that terminology describing the study of music and sound within archaeology has changed over time, and how this reflects developing methodologies, exploring the expectations and issues raised by the use of differing kinds of language to define and describe such work. It begins with a discussion of music archaeology, addressing the problems of using the term ‘music’ in an archaeological context. It continues with an examination of archaeoacoustics and acoustics, and an emphasis on sound rather than music. This leads on to a study of sound archaeology and soundscapes, pointing out that it is important to consider the complete acoustic ecology of an archaeological site, in order to identify its affordances, those possibilities offered by invariant acoustic properties. Using a case study from northern Spain, the paper suggests that all of these methodological approaches have merit, and that a project benefits from their integration
The Heavy Photon Search test detector
The Heavy Photon Search (HPS), an experiment to search for a hidden sector photon in fixed target electroproduction, is preparing for installation at the Thomas Jefferson National Accelerator Facility (JLab) in the Fall of 2014. As the first stage of this project, the HPS Test Run apparatus was constructed and operated in 2012 to demonstrate the experiment׳s technical feasibility and to confirm that the trigger rates and occupancies are as expected. This paper describes the HPS Test Run apparatus and readout electronics and its performance. In this setting, a heavy photon can be identified as a narrow peak in the e+e− invariant mass spectrum above the trident background or as a narrow invariant mass peak with a decay vertex displaced from the production target, so charged particle tracking and vertexing are needed for its detection. In the HPS Test Run, charged particles are measured with a compact forward silicon microstrip tracker inside a dipole magnet. Electromagnetic showers are detected in a PbW04 crystal calorimeter situated behind the magnet, and are used to trigger the experiment and identify electrons and positrons. Both detectors are placed close to the beam line and split top-bottom. This arrangement provides sensitivity to low-mass heavy photons, allows clear passage of the unscattered beam, and avoids the spray of degraded electrons coming from the target. The discrimination between prompt and displaced e+e− pairs requires the first layer of silicon sensors be placed only 10 cm downstream of the target. The expected signal is small, and the trident background huge, so the experiment requires very large statistics. Accordingly, the HPS Test Run utilizes high-rate readout and data acquisition electronics and a fast trigger to exploit the essentially 100% duty cycle of the CEBAF accelerator at JLab
Why orchestral musicians are bound to wear earplugs: About the ineffectiveness of physical measures to reduce sound exposure
Symphony orchestra musicians are exposed to noise levels that put them at risk of developing hearing damage. This study evaluates the potential effectivity of common control measures used in orchestras on open stages with a typical symphonic setup. A validated acoustic prediction model is used that calculates binaural sound exposure levels at the ears of all musicians in the orchestra. The model calculates the equivalent sound levels for a performance of the first 2 min of the 4th movement of Mahler's 1st symphony, which can be considered representative for loud orchestral music. Calculated results indicate that risers, available space, and screens at typical positions do not significantly influence sound exposure. A hypothetical scenario with surround screens shows that, even when shielding all direct sound from others, sound exposure is reduced moderately with the largest effect on players in loud sections. In contrast, a dramatic change in room acoustic conditions only leads to considerable reductions for soft players. It can be concluded that significant reductions are only reached with extreme measures that are unrealistic. It seems impossible for the studied physical measures to be effective enough to replace hearing protection devices such as ear plugs
PMm2: large photomultipliers and innovative electronics for the next-generation neutrino experiments
The next generation of proton decay and neutrino experiments, the
post-SuperKamiokande detectors as those that will take place in megaton size
water tanks, will require very large surfaces of photodetection and a large
volume of data. Even with large hemispherical photomultiplier tubes, the
expected number of channels should reach hundreds of thousands. A funded R&D
program to implement a solution is presented here. The very large surface of
photodetection is segmented in macro pixels made of 16 hemispherical (12
inches) photomultiplier tubes connected to an autonomous front-end which works
on a triggerless data acquisition mode. The expected data transmission rate is
5 Mb/s per cable, which can be achieved with existing techniques. This
architecture allows to reduce considerably the cost and facilitate the
industrialization. This document presents the simulations and measurements
which define the requirements for the photomultipliers and the electronics. A
proto-type of front-end electronics was successfully tested with 16
photomultiplier tubes supplied by a single high voltage, validating the
built-in gain adjustment and the calibration principle. The first tests and
calculations on the photomultiplier glass led to the study of a new package
optimized for a 10 bar pressure in order to sustain the high underwater
pressure.Comment: 1 pdf file, 4 pages, 4 figures, NDIP08, submitted to Nucl. Instr. and
Meth. Phys. Res.
The ALICE experiment at the CERN LHC
ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy density and temperature in nucleus-nucleus collisions. Besides running with Pb ions, the physics programme includes collisions with lighter ions, lower energy running and dedicated proton-nucleus runs. ALICE will also take data with proton beams at the top LHC energy to collect reference data for the heavy-ion programme and to address several QCD topics for which ALICE is complementary to the other LHC detectors. The ALICE detector has been built by a collaboration including currently over 1000 physicists and engineers from 105 Institutes in 30 countries. Its overall dimensions are 161626 m3 with a total weight of approximately 10 000 t. The experiment consists of 18 different detector systems each with its own specific technology choice and design constraints, driven both by the physics requirements and the experimental conditions expected at LHC. The most stringent design constraint is to cope with the extreme particle multiplicity anticipated in central Pb-Pb collisions. The different subsystems were optimized to provide high-momentum resolution as well as excellent Particle Identification (PID) over a broad range in momentum, up to the highest multiplicities predicted for LHC. This will allow for comprehensive studies of hadrons, electrons, muons, and photons produced in the collision of heavy nuclei. Most detector systems are scheduled to be installed and ready for data taking by mid-2008 when the LHC is scheduled to start operation, with the exception of parts of the Photon Spectrometer (PHOS), Transition Radiation Detector (TRD) and Electro Magnetic Calorimeter (EMCal). These detectors will be completed for the high-luminosity ion run expected in 2010. This paper describes in detail the detector components as installed for the first data taking in the summer of 2008
Development of high resolution and radiation hard electromagnetic calorimeter for the DVCS experiment
The electromagnetic calorimeter for the Deeply virtual Compton Scattering (DVCS) experiment requires high energy resolution and radiation hardness. The calorimeter for the experiment will be assembled using 1080 PbWO4 crystals supported by a carbon fiber structure. In order to achieve an energy resolution of ~ 1.3 % for 7 GeV gamma-rays, the thickness of the carbon structure was decided to be 0.5 mm based on Geant4 Monte-Carlo simulation. The detector will be operated in a harsh radiation environment (~ 5 Gy/hr), which will induce a severe decrease of the PbWO4 light transmission. For this reason, an optical bleaching method, based on the use of blue LEDs and quartz optical fiber will be used to regularly recover the crystals. For the radiation hard crystals, we found that the damage from 30 Gy of ionizing irradiation can be recovered by 2 hours of optical bleaching with 1 mm and 800 m diameter fibers. In this communication, we will present the current status of the detector R&D and construction, as well as simulation results of its performance
Weight loss is effective for symptomatic relief in obese subjects with knee osteoarthritis independently of joint damage severity assessed by high-field MRI and radiography
Objective: With an increasing prevalence of older and obese citizens, the problems of knee osteoarthritis (KOA) will escalate. Weight loss is recommended for obese KOA patients and in a majority of cases this leads to symptomatic relief. We hypothesized that pre-treatment structural status of the knee joint, assessed by radiographs, 1.5 T magnetic resonance imaging (MRI) and knee-joint alignment, may influence the symptomatic changes following a significant weight reduction. Design: Patients were recruited from a Department of Rheumatology. Eligibility criteria were age above 50 years, body mass index >= 30 kg/m(2), primary KOA diagnosed according to the American College of Rheumatology (ACR) criteria and having verified structural damage. Patients underwent a 16 weeks dietary programme with formula products and counselling. MRI and radiographs of the most symptomatic knee were obtained at baseline and assessed for structural damage using the Boston-Leeds Osteoarthritis of the Knee Score, minimum joint space width and Kellgren Lawrence score. Imaging variables, muscle strength and degree of alignment, were examined as predictors of changes in Knee Osteoarthritis Outcome Score (KOOS) and Outcome Measures in Rheumatoid Arthritis Clinical Trials (OMERACT) - Osteoarthritis Research Society International (OARSI) Responder Criterion. Results: Structural damage at baseline assessed by imaging, muscle strength or knee-joint alignment showed no statistically significant association to changes in KOOS pain and function in daily living (r 0.05) or the OMERACT-OARSI Responder Criterion (OR 0.48-1.68; P-values > 0.13). Conclusions: Presence of joint damage did not preclude symptomatic relief following a clinically relevant weight loss in older obese patients with KOA. Neither muscle strength nor knee-joint alignment was associated with the degree of symptomatic relief. (C) 2012 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved
- …