7,634 research outputs found

    Novel SM-like Higgs decay into displaced heavy neutrino pairs in U(1)' models

    Full text link
    We examine the observability of heavy neutrino (nu_h) signatures of a U(1)' enlarged Standard Model (SM) encompassing three heavy Majorana neutrinos alongside the known light neutrino states at the the Large Hadron Collider (LHC). We show that heavy neutrinos can be rather long-lived particles producing distinctive displaced vertices that can be accessed in the CERN LHC detectors. We concentrate here on the gluon fusion production mechanism gg -> H_{1,2} -> nu_h nu_h, where H_1 is the discovered SM-like Higgs and H_2 is a heavier state, yielding displaced leptons following nu_h decays into weak gauge bosons. Using data collected by the end of the LHC Run 2, these signatures would prove to be accessible with negligibly small background.Comment: 30 pages, journal versio

    Cohen-Coon PID Tuning Method: A Better Option to Ziegler Nichols-Pid Tuning Method

    Get PDF
    Controller loop tuning is the process of manipulating the parameters (gains) in a proportional-integral-derivative (PID) controller in order to give satisfactory response to the process system. A satisfactory response is one that exhibits the desired speed of response, yet meets the required accuracy and stability criteria. Control processes are generally tuned under operating conditions, as opposed to start-up conditions, so that the process variable is stable at an operating point. In the industry, the PID human tuning method normally applies to machinery tuning is the Ziegler Nichols (ZN) tuning method, known as the ZN-PID tuning method. However, this PID controller tuning method is ineffective in the control of nonlinear and complex system with varied parameters, large inertia and large delay, as it tends to give a very higher overshoot, higher rise time and higher settling time in the system operation. These disturbances, due to the nonlinearity of the system under control cause the controller to produce poor responses at the output, leading to poor system performance. The limitations in this ZN-PID tuning method could be overcome by using Cohen-Coon-PID (CC-PID) tuning method to drive the system plant. In a nutshell, this research work takes a look at the CC-PID tuning method as betterment to the current ZN-PID tuning method being mostly used in the industrial machinery control. This research work finds application in any PID controlled plant.

    Local knowledge and socio-economic determinants of traditional medicines' utilization in livestock health management in Southwest Nigeria

    Get PDF
    Smallholder livestock farmers in Nigeria utilize traditional medicines derived from medicinal plants (PMs) for the maintenance of their animals' health. This study was designed to determine the PMs used in the study area and their level of utilization by livestock farmers, compare the level of utilization of PMs across the three states surveyed and identify the socio-economic factors influencing farmer's utilization of PMs. Thirty-five PMs were identified. Farmers had considerable knowledge about the identified PMs but about 80.0% of them used the PMs to poor/moderate extent. There were statistical differences in the utilization level of PMs among the three states. Six socio-economic variables were found to be statistically significant in influencing PMs' utilization. Farmer's age, household size, distance to the nearest veterinary hospital/clinic and extent of travels, had positive effects while negative effects were exhibited by farm income and number of heads of livestock. It was concluded that there was considerable knowledge about PMs and that utilization of PMs varied between the three states. It was recommended that local knowledge of PMs be preserved in the study area through screening and documentation

    Methodology to obtain the security controls in multi-cloud applications

    Get PDF
    What controls should be used to ensure adequate security level during operation is a non-trivial subject in complex software systems and applications. The problem becomes even more challenging when the application uses multiple cloud services which security measures are beyond the control of the application provider. In this paper, a methodology that enables the identification of the best security controls for multicloud applications which components are deployed in heterogeneous cloud providers is presented. The methodology is based on application decomposition and modelling of threats over the components, followed by the analysis of the risks together with the capture of cloud business and security requirements. The methodology has been applied in the MUSA EU H2020 project use cases as the first step for building up the multi-cloud applications’ security-aware Service Level Agreements (SLA). The identified security controls will be included in the applications’ SLAs for their monitoring and fulfilment assurance at operation.European Commission's H202

    Measurement of the branching ratios of the decays Xi0 --> Sigma+ e- nubar and anti-Xi0 --> anti-Sigma+ e+ nu

    Full text link
    From 56 days of data taking in 2002, the NA48/1 experiment observed 6316 Xi0 --> Sigma+ e- nubar candidates (with the subsequent Sigma+ --> p pi0 decay) and 555 anti-Xi0 --> anti-Sigma+ e+ nu candidates with background contamination of 215+-44 and 136+-8 events, respectively. From these samples, the branching ratios BR(Xi0 --> Sigma+ e- nubar)= (2.51+-0.03stat+-0.09syst)E(-4) and BR(anti-Xi0 --> anti-Sigma+ e+ nu)= (2.55+-0.14stat+-0.10syst)E(-4) were measured allowing the determination of the CKM matrix element |Vus| = 0.209+0.023-0.028. Using the Particle Data Group average for |Vus| obtained in semileptonic kaon decays, we measured the ratio g1/f1 = 1.20+-0.05 of the axial-vector to vector form factors.Comment: 16 pages, 11 figures Submitted to Phys.Lett.

    First observation of the KS->pi0 gamma gamma decay

    Get PDF
    Using the NA48 detector at the CERN SPS, 31 KS->pi0 gamma gamma candidates with an estimated background of 13.7 +- 3.2 events have been observed. This first observation leads to a branching ratio of BR(KS->pi0 gamma gamma) = (4.9 +- 1.6(stat) +- 0.9(syst)) x 10^-8 in agreement with Chiral Perturbation theory predictions.Comment: 10 pages, 4 figures submitted to Phys. Lett.

    Search for CP violation in K0 -> 3 pi0 decays

    Get PDF
    Using data taken during the year 2000 with the NA48 detector at the CERN SPS, a search for the CP violating decay K_S -> 3 pi0 has been performed. From a fit to the lifetime distribution of about 4.9 million reconstructed K0/K0bar -> 3 pi0 decays, the CP violating amplitude eta_000 = A(K_S -> 3 pi0)/A(K_L -> 3 pi0) has been found to be Re(eta_000) = -0.002 +- 0.011 +- 0.015 and Im(eta_000) = -0.003 +- 0.013 +- 0.017. This corresponds to an upper limit on the branching fraction of Br(K_S -> 3 pi0) < 7.4 x 10^-7 at 90% confidence level. The result is used to improve knowledge of Re(epsilon) and the CPT violating quantity Im(delta) via the Bell-Steinberger relation.Comment: 18 pages, 7 figures, submitted to Phys. Lett.

    Measurement of the Ratio Gamma(KL -> pi+ pi-)/Gamma(KL -> pi e nu) and Extraction of the CP Violation Parameter |eta+-|

    Full text link
    We present a measurement of the ratio of the decay rates Gamma(KL -> pi+ pi-)/Gamma(KL -> pi e nu), denoted as Gamma(K2pi)/Gamma(Ke3). The analysis is based on data taken during a dedicated run in 1999 by the NA48 experiment at the CERN SPS. Using a sample of 47000 K2pi and five million Ke3 decays, we find Gamma(K2pi)/Gamma(Ke3) = (4.835 +- 0.022(stat) +- 0.016(syst)) x 10^-3. From this we derive the branching ratio of the CP violating decay KL -> pi+ pi- and the CP violation parameter |eta+-|. Excluding the CP conserving direct photon emission component KL -> pi+ pi- gamma, we obtain the results BR(KL -> pi+ pi-) = (1.941 +- 0.019) x 10^-3 and |eta+-| = (2.223 +- 0.012) x 10^-3.Comment: 20 pages, 7 figures, accepted by Phys. Lett.

    A precision measurement of direct CP violation in the decay of neutral kaons into two pions

    Get PDF
    The direct CP violation parameter Re(epsilon'/epsilon) has been measured from the decay rates of neutral kaons into two pions using the NA48 detector at the CERN SPS. The 2001 running period was devoted to collecting additional data under varied conditions compared to earlier years (1997-99). The new data yield the result: Re(epsilon'/epsilon) = (13.7 +/- 3.1) times 10^{-4}. Combining this result with that published from the 1997, 98 and 99 data, an overall value of Re(epsilon'/epsilon) = (14.7 +/- 2.2) times 10^{-4} is obtained from the NA48 experiment.Comment: 19 pages, 5 figures, to be published in Physics Letters
    • 

    corecore