Phosphorus retention capacity in red ferralitic soil

In this study the main physical-chemical characteristics of red ferralitic soil to use as substrate in subsurface wetlands was determined. The P-removal was evaluated in a short-term isotherm batch experiment and in a column percolation experiment. The acid characteristic and high content of iron minerals in the red ferralitic soil facilitated the phosphorus removal. Also the sorption isotherms at two different temperatures were obtained. The results showed that the sorption capacity increases with an increase in solution temperature from 25 to 35 degrees C. The experimental data were fitted to Langmuir and Freundlich models, having a better fit to the Freundlich isotherms. The maximum P-sorption capacities estimated using the Langmuir isotherm were 0.96 and 1.13 g/kg at 25 and 35 degrees C respectively. Moreover a column experiment was carried out at two different flows. Sequential extractions of the phosphorus-saturated soil indicated that phosphorus is mainly bound with iron or aluminum minerals. The results have demonstrated a good potential for red ferralitic soil for phosphorus removal from urban wastewater

Arsenic in drinking water wells on the Bolivian high plain: field monitoring and effect of salinity on removal efficiency of iron-oxides-containing filters

In the rural areas around Oruro (Bolivia), untreated groundwater is used directly as drinking water. This research aimed to evaluate the general drinking water quality, with focus on arsenic (As) concentrations, based on analysis of 67 samples from about 16 communities of the Oruro district. Subsequently a filter using Iron Oxide Coated Sand (IOCS) and a filter using a Composite Iron Matrix (CIM) were tested for their arsenic removal capacity using synthetic water mimicking real groundwater. Heavy metal concentrations in the sampled drinking water barely exceeded WHO guidelines. Arsenic concentrations reached values up to 964 mu g L-1 and exceeded the current WHO provisional guideline value of 10 mu g L-1 in more than 50% of the sampled wells. The WHO guideline of 250 mg L-1 for chloride and sulphate was also exceeded in more than a third of the samples, indicating high salinity in the drinking waters. Synthetic drinking water could be treated effectively by the IOCS- and CIM-based filters reducing As to concentrations lower than 10 mu g L-1. High levels of chloride and sulphate did not influence As removal efficiency. However, phosphate concentrations in the range from 4 to 24 mg L-1 drastically decreased removal efficiency of the IOCS-based filter but had no effects on removal efficiency of the CIM-based filter. Results of this study can be used as a base for further testing and practical implementation of drinking water purification in the Oruro region

Scheimpflug-based analysis of the reflectivity of the cornea in Marfan Syndrome

Purpose:We sought to investigate corneal reflectivity inMarfan syndrome (MFS) on the basis of Scheimpflug light intensity distribution. Methods: In a retrospective case-control analysis, the left eyes of 40 MFS patients and 40 age- and refraction-matched healthy controls were investigated. Patients with MFS meeting the Ghent II diagnostic criteria and with genetic confirmation of disease were included. Exclusion criteria were the following: Coexisting corneal, conjunctival, or scleral pathology, use of medication known to affect corneal transparency, history of ocular surgery, and insufficient data. Scheimpflug tomography images were exported to analyze corneal transparency in different corneal layers and regions. Each corneal image was automatically segmented, after which the corresponding pixel intensities in the defined regions of interest were statistically modeled using a Weibull probability density function from which parameters a (transparency) and ß (homogeneity) were derived. Results: The cornea in MFS showed significantly higher light reflectivity (overall cornea, a = 71 ± 17 arbitrary units (a.u.)) than in the control group (overall cornea, a = 59 ± 15 a.u.) (t test, P = 0.003). The a parameter was significantly higher in MFS eyes in all examined layers and regions (P 0.05). The difference in a did not correlate with ocular biometric properties (corneal thickness and curvature) or ectopia lentis (P> 0.05). Conclusions: The cornea in MFS shows significantly higher reflectivity than healthy controls with similar levels of homogeneity. Translational Relevance: The proposed methodology detects corneal reflectivity changes in MFS not available from regular slit-lamp examination

Effect of biochars pyrolyzed in N2 and CO2, and feedstock on microbial community in metal(loid)s contaminated soils

Little is known about the effects of applying amendments on soil for immobilizing metal(loid)s on the soil microbial community. Alterations in the microbial community were examined after incubation of treated contaminated soils. One soil was contaminated with Pb and As, a second soil with Cd and Zn. Red pepper stalk (RPS) and biochars produced from RPS in either N2 atmosphere (RPSN) or CO2 atmosphere (RPSC) were applied at a rate of 2.5% to the two soils and incubated for 30 days. Bacterial communities of control and treated soils were characterized by sequencing 16S rRNA genes using the Illumina MiSeq sequencing. In both soils, bacterial richness increased in the amended soils, though somewhat differently between the treatments. Evenness values decreased significantly, and the final overall diversities were reduced. The neutralization of pH, reduced available concentrations of Pb or Cd, and supplementation of available carbon and surface area could be possible factors affecting the community changes. Biochar amendments caused the soil bacterial communities to become more similar than those in the not amended soils. The bacterial community structures at the phylum and genus levels showed that amendment addition might restore the normal bacterial community of soils, and cause soil bacterial communities in contaminated soils to normalize and stabilize

Development, implementation, and validation of a generic nutrient recovery model (NRM) library

The reported research developed a generic nutrient recovery model (NRM) library based on detailed chemical solution speciation and reaction kinetics, with focus on fertilizer quality and quantity as model outputs. Dynamic physicochemical three-phase process models for precipitation/crystallization, stripping and acidic air scrubbing as key unit processes were developed. In addition, a compatible biological-physicochemical anaerobic digester model was built. The latter includes sulfurgenesis, biological N/P/K/S release/uptake, interactions with organics, among other relevant processes, such as precipitation, ion pairing and liquid-gas transfer. Using a systematic database reduction procedure, a 3- to 5-fold improvement of model simulation speeds was obtained as compared to using full standard thermodynamic databases. Missing components and reactions in existing standard databases were discovered. Hence, a generic nutrient recovery database was created for future applications. The models were verified and validated against a range of experimental results. Their functionality in terms of increased process understanding and optimization was demonstrated

Presence and mobility of arsenic in estuarine wetland soils of the Scheldt estuary (Belgium)

We aimed to assess the presence and availability of arsenic (As) in intertidal marshes of the Scheldt estuary. Arsenic content was determined in soils sampled at 4 sampling depths in 11 marshes, together with other physicochemical characteristics. Subsequently, a greenhouse experiment was set up in which pore water arsenic (As) concentrations were measured 4 times in a 298-day period in 4 marsh soils at different sampling depths (10, 30, 60 and 90 cm) upon adjusting the water table level to 0, 40 and 80 cm below the surface of these soils. The As content in the soil varied significantly with sampling depth and location. Clay and organic matter seem to promote As accumulation in the upper soil layer (0–20 cm below the surface), whereas sulfide precipitation plays a significant role at higher sampling depths (20– 100 cm below the surface). The As concentrations in the pore water of the greenhouse experiment often significantly exceeded the Flemish soil sanitation thresholds for groundwater. There were indications that As release is not only affected by the reductive dissolution of Fe/Mn oxides, but also by e.g. a direct reduction of As(V) to As(III). Below the water table, sulfide precipitation seems to lower As mobility when reducing conditions have been sufficiently established. Above the water table, sulfates and bicarbonates induce As release from the solid soil phase to the pore water

Weather, disease, and wheat breeding effects on Kansas wheat varietal yields, 1985 to 2011.

Wheat (Triticum aestivum L.) yields in Kansas have increased due to wheat breeding and improved agronomic practices, but are subject to climate and disease challenges. The objective of this research is to quantify the impact of weather, disease, and genetic improvement on wheat yields of varieties grown in 11 locations in Kansas from 1985 to 2011. Wheat variety yield data from Kansas performance tests were matched with comprehensive location-specific disease and weather data, including seasonal precipitation, monthly air temperature, air temperature and solar radiation around anthesis, and vapor pressure deficit (VPD). The results show that wheat breeding programs increased yield by 34 kg ha⁻¹ yr⁻¹. From 1985 through 2011, wheat breeding increased average wheat yields by 917 kg ha⁻¹, or 27% of total yield. Weather was found to have a large impact on wheat yields. Simulations demonstrated that a 1°C increase in projected mean temperature was associated with a decrease in wheat yields of 715 kg ha⁻¹, or 21%. Weather, diseases, and genetics all had significant impacts on wheat yields in 11 locations in Kansas during 1985 to 2011