888 research outputs found
The economic impact of the Budapest Airport on the local economy
Airports have an unquestionably dominant role in the transport of the 21st century; air transport is the heart of the modern, globalised economy. Beyond this primary function, the international literature also emphasises the considerable economic and economy development effects of airports. The significant airports of the world not only facilitate the local economy but fundamentally determine that. The aim of the analysis is not only the study of the economic impact of the Budapest Ferihegy International Airport, but also examining the economic impact of the complex system of the companies operating at the airport and complementing each other. First of all, we discuss the methods and concepts to be applied in the analysis of the economic impact of the Budapest Airport. Although the methods and the terminology is fairly uniform in the course of the general review studies, the actual pieces of research can mean something different by the same concepts or they may examine the same thing with different concepts.
Crossover from Single-Ion to Coherent Non-Fermi Liquid Behavior in CeLaNiGe
We report specific heat and magneto-resistance studies on the compound
CeLaNiGe for various concentrations over the entire
stoichiometric range. Our data reveal single-ion scaling with Ce-concentration
between and 0.95. Furthermore, CeNiGe turns out to have
the largest ever recorded value of the electronic specific heat 5.5 J at K which was found in Cerium
f-electron lattice systems. In the doped samples increases
logarithmically in the temperature range between 3 K and 50 mK typical for
non-Fermi liquid (nFl) behavior, while exhibits a Kondo-like minimum
around 30 K, followed by a single-ion local nFl behavior. In contrast to this,
CeNiGe flattens out in below 300 mK and displays a
pronounced maximum in the resistivity curve at 1.5 K indicating a coherent
heavy fermion groundstate. These properties render the compound
CeLaNiGe a unique system on the borderline between
Fermi liquid and nFl physics.Comment: 2 pages, 3 figures, SCES0
P02.19. Resilience training for depressed healthcare workers: results from 2 and 12 month followup
P02.189. GOALS: bundled services to reduce the length of hospital stay in women undergoing gynecology oncology surgery
Recommended from our members
Aerosol number to volume ratios in Southwest Portugal during ACE-2
Past studies have indicated that long-term averages of the aerosol number to volume ratios (defined as the number of particles larger than a certain diameter divided by the particle volume over some range less than 1 μm) show little variability over the Atlantic. This work presents number to volume ratios (R) measured during the ACE-2 experiment on the land-based Sagres field site located in Southwest Portugal. The values of R measured in Sagres compare reasonably well with previous measurements over the Atlantic. The main emphasis of this work is therefore to investigate more closely possible reasons for the observed stability of the number to volume ratio. Aerosol number size distributions measured in Sagres are parametrized by the sum of two log-normal distributions fitted to the accumulation and to the Aitken mode. The main factor that limits the variability of R is that the parameters of these log-normal distributions are not always independent but show some covariance. In polluted air mass types correlations between parameters of the Aitken and accumulation mode are mostly responsible for stabilizing R. In marine air mass types the variability of R is reduced by an inverse relationship between the accumulation-mode mean diameter and standard deviation, consistent with condensational processes and cloud processing working on the aerosol. However, despite this reduction, the variability of R in marine air mass types is still considerable and R is linearly dependent on the number concentration of particles larger than 90 nm. This partly due to a mil of Aitken-mode particles extending to sizes larger than 90 nm
Hong-Ou-Mandel interferometer with cavities: theory
We study the number of coincidences in a Hong-Ou-Mandel interferometer exit
whose arms have been supplemented with the addition of one or two optical
cavities. The fourth-order correlation function at the beam-splitter exit is
calculated. In the regime where the cavity length are larger than the
one-photon coherence length, photon coalescence and anti-coalescence
interference is observed. Feynman's path diagrams for the indistinguishable
processes that lead to quantum interference are presented. As application for
the Hong-Ou-Mandel interferometer with two cavities, it is discussed the
construction of an optical XOR gate
USCID fourth international conference
Presented at the Role of irrigation and drainage in a sustainable future: USCID fourth international conference on irrigation and drainage on October 3-6, 2007 in Sacramento, California.Includes bibliographical references.Deficit irrigation commonly is used in regions with reduced or limited irrigation capacity to increase water use efficiency (WUE). This research measured winter wheat (Triticum aestivum L.) and sorghum (Sorghum bicolor L. Moench) water use (ET) and yields so WUE could be determined. Two precision weighing lysimeters were used to accurately measure the crop ET from fully irrigated (FULL) fields and deficit irrigated (DI) fields. The DI wheat was an irrigation cutoff at the jointing growth stage as might be used if available irrigation water was being shifted to summer crops while the sorghum DI used a reduced irrigation rate (~50% FULL irrigation) as might occur with a lower irrigation capacity. Both crops were irrigated by a lateral-move sprinkler system at Bushland, Texas. Wheat ET was decreased by 20% from 849 to 677 mm with a 76% decline in irrigation. Sorghum ET decreased 10% from 621 mm to 560 mm with a 48% decline in irrigation. WUE of sorghum for both grain and dry matter increased slightly with DI but seed mass, and harvest index were unaffected. DI irrigated wheat extracted soil water to a depth of 1.7 m in the Pullman soil with some apparent root extraction to the 2.3-m depth. Sorghum extracted soil water mainly above 1.2 m in the Pullman soil profile if well watered, but DI sorghum extracted soil water to 1.7 m. Sprinkler DI of sorghum beginning with a nearly full soil water content profile permitted the crop to better exploit the soil profile water and minimize soil water deficit effects on crop yield in a year with typical summer rainfall for Bushland (~210 mm) such that yield was not reduced by DI. Cutting off winter wheat irrigation in early spring with a near full soil water profile at jointing, permitted the wheat crop to fully exploit the soil water reservoir when rainfall was normal
Calibration and measurement uncertainties of a continuous-flow cloud condensation nuclei counter (DMT-CCNC): CCN activation of ammonium sulfate and sodium chloride aerosol particles in theory and experiment
International audienceExperimental and theoretical uncertainties in the measurement of cloud condensation nuclei (CCN) with a continuous-flow thermal-gradient CCN counter from Droplet Measurement Technologies (DMT-CCNC) have been assessed by model calculations and calibration experiments with ammonium sulfate and sodium chloride aerosol particles in the diameter range of 20?220 nm. Experiments have been performed in the laboratory and during field measurement campaigns, extending over a period of more than one year and covering a wide range of operating conditions (650?1020 hPa ambient pressure, 0.5?1.0 L min?1 aerosol flow rate, 20?30°C inlet temperature, 4?34 K m?1 temperature gradient). For each set of conditions, the effective water vapor supersaturation (Seff) in the CCNC was determined from the measured CCN activation spectra and Köhler model calculations. High measurement precision was achieved under stable laboratory conditions, where relative variations of Seff in the CCNC were generally less than ±2%. During field measurements, however, the relative variability increased up to ±5?7%, which can be mostly attributed to variations of the CCNC column top temperature with ambient temperature. To assess the accuracy of the Köhler models used to calculate Seff, we have performed a comprehensive comparison and uncertainty analysis of the various Köhler models and thermodynamic parameterizations commonly used in CCN studies. For the relevant supersaturation range (0.05?2%), the relative deviations between different modeling approaches were as high as 25% for (NH4)2SO4 and 16% for NaCl. The deviations were mostly caused by the different parameterizations for the activity of water in aqueous solutions of (NH4)2SO4 and NaCl (activity parameterization, osmotic coefficient, and van't Hoff factor models). The uncertainties related to the model parameterizations of water activity clearly exceeded the CCNC measurement precision. Relative deviations caused by different ways of calculating or approximating solution density and surface tension did not exceed 3% for (NH4)2SO4 and 1.5% for NaCl. Nevertheless, they did exceed the CCNC measurement precision under well-defined operating conditions and should not be neglected in studies aimed at high accuracy. To ensure comparability of results, we suggest that CCN studies should always report exactly which Köhler model equations and parameterizations of solution properties were used. Substantial differences between the CCNC calibration results obtained with (NH4)2SO4 and NaCl aerosols under equal experimental conditions (relative deviations of Seff up to ~10%) indicate inconsistencies between widely used activity parameterizations derived from electrodynamic balance (EDB) single particle experiments (Tang and Munkelwitz, 1994; Tang, 1996) and hygroscopicity tandem differential mobility analyzer (HTDMA) aerosol experiments (Kreidenweis et al., 2005). Therefore, we see a need for further evaluation and experimental confirmation of preferred data sets and parameterizations for the activity of water in dilute aqueous (NH4)2SO4 and NaCl solutions. The experimental results were also used to test the CCNC flow model of Lance et al.~(2006), which describes the dependence of Seff on temperature, pressure, and flow rate in the CCN counter. This model could be applied after subtraction of a near-constant temperature offset and derivation of an instrument-specific thermal resistance parameter (RT?1.8 K W?1). At Seff>0.1% the relative deviations between the flow model and experimental results were mostly less than 5%, when the same Köhler model approach was used. At Seff?.1%, however, the deviations exceeded 20%, which can be attributed to non-idealities which also caused the near-constant temperature offset. Therefore, we suggest that the CCNC flow model can be used to extrapolate calibration results, but should generally be complemented by calibration experiments performed under the relevant operating conditions ? during field campaigns as well as in laboratory studies
- …