William Francis Thompson (1888–1965) and His Pioneering Studies of the Pacific Halibut, Hippoglossus stenolepis

William Francis Thompson (1888–1965), as a temporary employee of the British Columbia Provincial Fisheries Department, was assigned in 1914 to under-take full-time studies of the Pacific halibut, Hippoglossus stenolepis. The fishery was showing signs of depletion, so Thompson undertook the inquiry into this resource, the first intensive study on the Pacific halibut. Three years later, Thompson, working alone, had provided a basic foundation of knowledge for the subsequent management of this resource. He published seven land-mark papers on this species, and this work marked the first phase of a career in fisheries science that was to last nearly 50 years

Gas diffuser facilitates withdrawal of cryogenic liquids from tanks

Compact, cylindrical gas diffuser with radial exhaust slots and internal axial flow channels maintains the necessary pressure for the desired withdrawal rate of cryogenic liquids from tanks. The diffuser minimizes pressure loss which results from condensation of nitrogen gas in the liquid and prevents direct impingement of gas jets on liquid surface to reduce turbulence

John Nathan Cobb (1868–1930): Founding Director of the College of Fisheries, University of Washington, Seattle

John Nathan Cobb (1868–1930) became the founding Director of the College of Fisheries, University of Washington, Seattle, in 1919 without the benefit of a college education. An inquisitive and ambitious man, he began his career in the newspaper business and was introduced to commercial fisheries when he joined the U.S. Fish Commission (USFC) in 1895 as a clerk, and he was soon promoted to a “Field Agent” in the Division of Statistics, Washington, D.C. During the next 17 years, Cobb surveyed commercial fisheries from Maine to Florida, Hawaii, the Pacific Northwest, and Alaska for the USFC and its successor, the U.S. Bureau of Fisheries. In 1913, he became editor of the prominent west coast trade magazine, Pacific Fisherman, of Seattle, Wash., where he became known as a leading expert on the fisheries of the Pacific Northwest. He soon joined the campaign, led by his employer, to establish the nation’s first fisheries school at the University of Washington. After a brief interlude (1917–1918) with the Alaska Packers Association in San Francisco, Calif., he was chosen as the School’s founding director in 1919. Reflecting his experience and mindset, as well as the University’s apparent initial desire, Cobb established the College of Fisheries primarily as a training ground for those interested in applied aspects of the commercial fishing industry. Cobb attracted sufficient students, was a vigorous spokesman for the College, and had ambitions plans for expansion of the school’s faculty and facilities. He became aware that the College was not held in high esteem by his faculty colleagues or by the University administration because of the school’s failure to emphasize scholastic achievement, and he attempted to correct this deficiency. Cobb became ill with heart problems in 1929 and died on 13 January 1930. The University soon thereafter dissolved the College and dismissed all but one of its faculty. A Department of Fisheries, in the College of Science, was then established in 1930 and was led by William Francis Thompson (1888–1965), who emphasized basic science and fishery biology. The latter format continues to the present in the Department’s successor, The School of Aquatic Fisheries and Science

Metallic threaded composite fastener

A metallic threaded composite fastener, particularly suited for high temperature applications, has a body member made of high temperature resistant composite material with a ceramic coating. The body member has a head portion configured to be installed in a countersunk hole and a shank portion which is noncircular and tapered. One part of the shank may be noncircular and the other part tapered, or the two types of surface could be combined into a frustum of a noncircular cone. A split collar member made of high strength, high temperature tolerant metal alloy is split into two halves and the interior of the halves are configured to engage the shank. The exterior of the collar has a circumferential groove which receives a lock ring to secure the collar halves to the shank. In the assembled condition torque may be transmitted from the body to the split collar by the engaged noncircular portions to install and remove the fastener assembly into or from a threaded aperture and shear loads in the collar threads are transferred to the shank tapered portion as a combination of radial compression and axial tension loads. Thus, tension loads may be applied to the fastener shank without damaging the ceramic coating

Charles H. Gilbert, Pioneer Ichthyologist and Fishery Biologist

Charles Henry Gilbert (Fig. 1) was a pioneer ichthyologist and, later, fishery biologist of particular significance to natural history of the western United States. Born in Rockford, Illinois on 5 December 1859, he spent his early years in Indianapolis, Indiana, where, in 1874, he came under the influence of his high school teacher, David Starr Jordan (1851-1931). Gilbert graduated from high school in 1875, and when Jordan became a professor of natural history at Butler University in Irvington, Indiana, Gilbert followed, and received his B.A. degree in 1879. Jordan moved to Indiana University, in Bloomington, in the fall of 1879, and Gilbert again followed, earning his M.S. degree in 1882 and his Ph.D. in 1883 in zoology. His doctorate was the first ever awarded by Indiana University

Pre-stressed thermal protection systems

A hexagonal protective and high temperature resistant system for the Space Shuttle Orbiter consists of a multiplicity of pockets formed by hexagonally oriented spacer bars secured on the vehicle substructure. A packing of low density insulating batt material 18 in each pocket, and a thin protective panel of laterally resilient advanced carbon-carbon material surmounting the peripherals bars and packing. Each panel has three stepped or offset lips on contiguous edges. At the center of each pocket is a fully insulated stanchion secured to and connecting the substructure and panel for flexing the panel toward the substructure and thereby prestressing the panel and forcing the panel edges firmly against the spacer bars

Fluorosilicone O rings in GOX at 500 deg F and 1500 psig

Fluorosilicon O rings tested to determine resistance to high pressure, high temperature oxyge

Precise relative location estimation from satellite laser observations

Laser data from the Greenbelt, Bermuda, and Grand Turk Island tec tracking stations, and from observation at Patrick Air Force Base were used in an experiment to determine precise inter-station baselines and relative heights in short orbital arcs of no more than 12 minutes duration. The relative locations obtained are sensitive to reasonable variations in the gravity field to less than 15 cm in inter-station baseline and less than 35 cm in relative height. The formal standard deviations for range measurements at the observed 7 cm noise level are less than 10 cm for either baseline or relative height determinations from the twenty-arc combination solution. The method of data analysis is described, the baseline and relative height results are presented, and gravity model dependence is considered

Realizable optimal control for a remotely piloted research vehicle

The design of a control system using the linear-quadratic regulator (LQR) control law theory for time invariant systems in conjunction with an incremental gradient procedure is presented. The incremental gradient technique reduces the full-state feedback controller design, generated by the LQR algorithm, to a realizable design. With a realizable controller, the feedback gains are based only on the available system outputs instead of being based on the full-state outputs. The design is for a remotely piloted research vehicle (RPRV) stability augmentation system. The design includes methods for accounting for noisy measurements, discrete controls with zero-order-hold outputs, and computational delay errors. Results from simulation studies of the response of the RPRV to a step in the elevator and frequency analysis techniques are included to illustrate these abnormalities and their influence on the controller design