Temporal afterglow between two pulses of repetitively pulsed argon-acetylene plasma:measuring electron and negatively charged species densities

The temporal afterglow between two pulses of a repetitively pulsed radio-frequency driven low-pressure argon-acetylene plasma is experimentally explored using laser-induced photodetachment combined with microwave cavity resonance spectroscopy. The densities of electrons and negatively charged species, i.e. anions and dust particles, are measured temporally resolved until 1.9 s in the temporal plasma afterglow. Two different plasma-on times are adjusted to investigate the dynamics of anions and dust particles in the afterglow phase. The measurements show that while electrons decay rapidly within the first few milliseconds of the afterglow phase, the negatively charged species reside much longer in the plasma after the plasma is switched off. The electron density decay is measured to be faster for a longer plasma-on time. This effect is attributed to an enhanced recombination rate due to a higher dust particle density and/or size. The density of negatively charged species decays within two different timescales. The first 20 milliseconds of the afterglow is marked with a rapid decay in the negatively charged species density, in contrast with their slow density decay in the second time scale. Moreover, a residual of the negatively charged species densities is detected as long as 1.9 s after extinguishing the plasma.</p

Spontaneous midgestation abortion associated with Bacteroides fragilis: a case report.

A midtrimester pregnancy loss, due to B. fragilis is described. We hypothesize that in early pregnancy anaerobic bacterial vaginosis has the greatest pathogenicity, while an intermediate (mixed) flora is most dangerous in midtrimester miscarriages, and that aerobic vaginitis is more dangerous than anaerobes towards the second half of the pregnancy. Unfortunately, no screen and treat policy has yet been proven to be sufficiently powerful to prevent the vast majority of infection-related prematurity. © 2005 Taylor & Francis.status: publishe

Covering Arrays for Equivalence Classes of Words

Covering arrays for words of length $t$ over a $d$ letter alphabet are $k \times n$ arrays with entries from the alphabet so that for each choice of $t$ columns, each of the $d^t$ $t$-letter words appears at least once among the rows of the selected columns. We study two schemes in which all words are not considered to be different. In the first case words are equivalent if they induce the same partition of a $t$ element set. In the second case, words of the same weight are equivalent. In both cases we produce logarithmic upper bounds on the minimum size $k=k(n)$ of a covering array. Definitive results for $t=2,3,4$, as well as general results, are provided.Comment: 17 page

The Better than Dead Method: Feasibility and Interpretation of a Valuation Study

Background Traditionally, the valuation of health states worse than being dead suffers from two problems: [1] the use of different elicitation methods for positive and negative values, necessitating arbitrary transformations to map negative to positive values; and [2] the inability to quantify that values are time dependent. The Better than Dead (BTD) method is a health-state valuation method where states with a certain duration are compared with being dead. It has the potential to overcome these problems. Objectives To test the feasibility of the BTD method to estimate values for the EQ-5D system. Methods A representative sample of 291 Dutch respondents (aged 18-45 years) was recruited. In a web-based questionnaire, preferences were elicited for a selection of 50 different health states with six durations between 1 and 40 years. Random-effects models were used to estimate the effects of socio-demographic and experimental variables, and to estimate values for the EQ-5D. Test-retest reliability was assessed in 41 respondents. Results Important determinants for BTD were a religious life stance [odds ratio 4.09 (2.00-8.36)] and the educational level. The fastest respondents more often preferred health-state scenarios to being dead and had lower test-retest reliability (0.45 versus 0.77 and 0.84 for fast, medium and slow response times, respectively). The results showed a small number of so-called maximal endurable time states. Conclusion Valuating health states using the BTD method is feasible and reliable. Further research should explore how the experimental setting modifies how values depend on time

Corrigendum to “Pollen-based paleoenvironmental and paleoclimatic change at Lake Ohrid (south-eastern Europe) during the past 500 ka” published in Biogeosciences, 13, 1423–1437, 2016

In this corrigendum we report an updated pollen record from the Lake Ohrid DEEP site spanning the past 500 ka whereby we have reprocessed and re-analyzed 104 samples affected by chemical procedure problems that occurred in one palynological laboratory. Firstly, these samples were affected by the use of wrong containers, causing in- adequate settling of particles at the set centrifuging speed. Secondly, HCl and HF treatments were combined without the prescribed intermediate centrifuging and decanting steps. The inaccuracy in the protocol resulted in the loss of smaller pollen grains and in the overrepresentation of bisaccate ones in most of the re-analyzed samples. We therefore provide an updated set of figures with the new data and have revised the description of the results, discussion and conclusions re- ported in Sadori et al. (2016) where necessary. We stress that the majority of the original results and conclusions remain valid, while the records’ reliability and resolution have improved as 12 samples that had been omitted in the original study because of low count sums are now included in the revised dataset (Sadori et al., 2018)

Analysis of and workarounds for element reversal for a finite element-based algorithm for warping triangular and tetrahedral meshes

We consider an algorithm called FEMWARP for warping triangular and tetrahedral finite element meshes that computes the warping using the finite element method itself. The algorithm takes as input a two- or three-dimensional domain defined by a boundary mesh (segments in one dimension or triangles in two dimensions) that has a volume mesh (triangles in two dimensions or tetrahedra in three dimensions) in its interior. It also takes as input a prescribed movement of the boundary mesh. It computes as output updated positions of the vertices of the volume mesh. The first step of the algorithm is to determine from the initial mesh a set of local weights for each interior vertex that describes each interior vertex in terms of the positions of its neighbors. These weights are computed using a finite element stiffness matrix. After a boundary transformation is applied, a linear system of equations based upon the weights is solved to determine the final positions of the interior vertices. The FEMWARP algorithm has been considered in the previous literature (e.g., in a 2001 paper by Baker). FEMWARP has been succesful in computing deformed meshes for certain applications. However, sometimes FEMWARP reverses elements; this is our main concern in this paper. We analyze the causes for this undesirable behavior and propose several techniques to make the method more robust against reversals. The most successful of the proposed methods includes combining FEMWARP with an optimization-based untangler.Comment: Revision of earlier version of paper. Submitted for publication in BIT Numerical Mathematics on 27 April 2010. Accepted for publication on 7 September 2010. Published online on 9 October 2010. The final publication is available at http://www.springerlink.co

Modern pollen-vegetation relationships along a steep temperature gradient in the Tropical Andes of Ecuador

This is the author accepted manuscript. The final version is available from Cambridge University Press via the DOI in this record.The characterization of modern pollen rain assemblages along environmental gradients is an essential prerequisite for reliable interpretations of fossil pollen records. In this study, we identify pollen-vegetation relationships using modern pollen rain assemblages in moss polsters (n = 13) and lake sediment surface samples (n = 11) along a steep temperature gradient of 7°C (3100–4200 m above sea level) on the western Andean Cordillera, Ecuador. The pollen rain is correlated to vascular plant abundance data recorded in vegetation relevées (n = 13). Results show that pollen spectra from both moss polsters and sediment surface samples reflect changes in species composition along the temperature gradient, despite overrepresentation of upper montane forest taxa in the latter. Estimated pollen transport distance for a lake (Laguna Llaviucu) situated in a steep upper montane forest valley is 1–2 km, while a lake (Laguna Pallcacocha) in the páramo captures pollen input from a distance of up to 10–40 km. Weinmannia spp., Podocarpus spp., and Hedyosmum sp. are indicators of local upper montane forest vegetation, while Phlegmariurus spp. and Plantago spp. are indicators for local páramo vegetation.Earth and Life Science council (ALW) of the Netherlands Organisation of Scientific Researc

Effects of Dementia-Care Mapping on Residents and Staff of Care Homes:A Pragmatic Cluster-Randomised Controlled Trial

BACKGROUND: The effectiveness of dementia-care mapping (DCM) for institutionalised people with dementia has been demonstrated in an explanatory cluster-randomised controlled trial (cRCT) with two DCM researchers carrying out the DCM intervention. In order to be able to inform daily practice, we studied DCM effectiveness in a pragmatic cRCT involving a wide range of care homes with trained nursing staff carrying out the intervention. METHODS: Dementia special care units were randomly assigned to DCM or usual care. Nurses from the intervention care homes received DCM training and conducted the 4-months DCM-intervention twice during the study. The primary outcome was agitation, measured with the Cohen-Mansfield agitation inventory (CMAI). The secondary outcomes included residents’ neuropsychiatric symptoms (NPSs) and quality of life, and staff stress and job satisfaction. The nursing staff made all measurements at baseline and two follow-ups at 4-month intervals. We used linear mixed-effect models to test treatment and time effects. RESULTS: 34 units from 11 care homes, including 434 residents and 382 nursing staff members, were randomly assigned. Ten nurses from the intervention units completed the basic and advanced DCM training. Intention-to-treat analysis showed no statistically significant effect on the CMAI (mean difference between groups 2·4, 95% CI −2·7 to 7·6; p = 0·34). More NPSs were reported in the intervention group than in usual care (p = 0·02). Intervention staff reported fewer negative and more positive emotional reactions during work (p = 0·02). There were no other significant effects. CONCLUSIONS: Our pragmatic findings did not confirm the effect on the primary outcome of agitation in the explanatory study. Perhaps the variability of the extent of implementation of DCM may explain the lack of effect. TRIAL REGISTRATION: Dutch Trials Registry NTR2314