6,749 research outputs found
Effect of feed supplementation with Origanum vulgare L. essential oil on sea bass (Dicentrarchus labrax): A preliminary framework on metabolic status and growth performances
This study provided a preliminary framework for the effects of Origanum vulgare L. essential oil (EO) on sea bass (Dicentrarchus labrax) health status over a 60-day feeding trial. Fish were fed twice a day until apparent satiety with three different diets: a control diet (CD), and two experimental diets supplemented with 100 (D100) and 200 (D200) ppm of oregano EO. No mortality was observed in each treatment. Feeding on D100 diet resulted in high growth performances and better food conversion and protein efficiency ratios. Additionally, the supplementation of 100 ppm EO diet also improved (P < 0.05) hepatosomatic and viscerosomatic indices, compared both to control and D200 diets. EO feeding positively affected (P < 0.05) several serum biochemical indices (amylase activity and total proteins, glucose, triglycerides, and cholesterol levels). Focusing on the antioxidant potential of blood, D100 led to the highest (P < 0.05) ferric reducing antioxidant power values and the lowest (P < 0.05) thiobarbituric acid-reactive substances levels in blood
A Fibre- vs. cereal grain-based diet: Which is better for horse welfare? Effects on intestinal permeability, muscle characteristics and oxidative status in horses reared for meat production
Horses reared for meat production are fed high amounts of cereal grains in comparison with horses raised for other purposes. Such feeding practice may lead to risk of poor welfare consequences. The aim of this study was to investigate the effects of two feeding practices on selected metabolic parameters and production aspects. Nineteen Bardigiano horses, 14.3 ± 0.7 months of age, were randomly assigned to two groups—one fed with high amounts of cereal grains (HCG; n = 9; 43% hay plus 57% cereal grain-based pelleted feed) vs. one fed with high amounts of fibre (HFG; n = 10; 70% hay plus 30% pelleted fibrous feed)—for 129 days. At slaught on abattoir, biological and tissue samples were collected to evaluate the microbiological contamination of mesenteric lymph nodes and liver; selected meat quality traits (chemical composition and fatty acid profile of the Longissimus thoracis et lumborum muscle); and the oxidative status of the horse. A linear mixed model was used: dietary treatment and sex were fixed effects and their interaction analysed on production and metabolic parameters as dependent variables. Results showed an increased intestinal permeability in the horses fed HCG compared to HFG, according to the significant increased total mesophilic aerobic bacteria counts in mesenteric lymph nodes (p = 0.04) and liver samples (p = 0.05). Horses in HCG showed increased muscle pH (p = 0.02), lighter muscle colour (L) (p = 0.01), increased intramuscular fat concentrations (p = 0.03), increased muscle glutathione peroxidase and superoxide dismutase activities (p = 0.01 and p = 0.03, respectively). Moreover, horses in HCG had lower muscle water holding capacity at interaction with sex (p = 0.03, lower in female), lower muscle protein content (p = 0.01), lower concentration of muscle PUFAs (p = 0.05) and lower plasma catalase activities (p = 0.05). Our results showed that feeding a high cereal grains diet can have global effects on horse physiology, and thus represents a threat for their welfare
Testbeam and Laboratory Characterization of CMS 3D Pixel Sensors
The pixel detector is the innermost tracking device in CMS, reconstructing
interaction vertices and charged particle trajectories. The sensors located in
the innermost layers of the pixel detector must be upgraded for the ten-fold
increase in luminosity expected with the High- Luminosity LHC (HL-LHC) phase.
As a possible replacement for planar sensors, 3D silicon technology is under
consideration due to its good performance after high radiation fluence. In this
paper, we report on pre- and post- irradiation measurements for CMS 3D pixel
sensors with different electrode configurations. The effects of irradiation on
electrical properties, charge collection efficiency, and position resolution of
3D sensors are discussed. Measurements of various test structures for
monitoring the fabrication process and studying the bulk and surface
properties, such as MOS capacitors, planar and gate-controlled diodes are also
presented.Comment: 14 page
R&D for new silicon pixel sensors for the High Luminosity phase of the CMS experiment at LHC
The High Luminosity upgrade of the CERN LHC collider (HLLHC) demands a new high-radiation–tolerant solid-state pixel sensor capable of surviving fluencies up to a few 1016 neq/cm2 at ∼ 3 cm from the interaction point. To this extent the INFN ATLAS-CMS joint research activity, in collaboration with Fondazione Bruno Kessler (FBK), is aiming at the development of thin n-in-p–type pixel sensors for the HL-LHC. The R&D covers both planar and single-sided 3D columnar pixel devices made with the Si-Si Direct Wafer Bonding technique, which allows for the production of sensors with 100 μm and 130 μm active thickness for planar sensors, and 130 μm for 3D sensors, the thinnest ones ever produced so far. The first prototypes of hybrid modules, bump-bonded to the present CMS readout chip, have been tested on beam. The first results on their performance before and after irradiation are presented
The INFN R&D: New pixel detector for the High Luminosity upgrade of the LHC
The High Luminosity upgrade of the CERN-LHC (HL-LHC) demands for a new high-radiation tolerant solid-state pixel sensor capable of surviving fluencies up to a few 1016 particles/cm2 at ∼3 cm from the interaction point. To
this extent the INFN ATLAS-CMS joint research activity, in collaboration with Fondazione Bruno Kessler-FBK, is aiming at the development of thin n-in-p type pixel sensors for the HL-LHC. The R&D covers both planar and single-sided 3D
columnar pixel devices made with the Si-Si Direct Wafer Bonding technique, which allows for the production of sensors with 100 μm and 130 μm active thickness for planar sensors, and 130 μm for 3D sensors, the thinnest ones ever produced so far. The first prototypes of hybrid modules bump-bonded to the present CMS and ATLAS readout chips have been tested in beam tests. The preliminary results on their performance before and after irradiation are presented
The dynamics of circulating tumour DNA (ctDNA) during treatment reflects tumour response in advanced melanoma patients
Despite the introduction of targeted (BRAFi/MEKi) and immune checkpoint inhibitors (ICIs) has significantly reduced the recurrence rate and improved the overall survival (OS) of patients with Stage III and IV melanoma, only a percentage will benefit of durable disease control. The aim of this study was to examine whether the levels of circulating tumour DNA (ctDNA) in plasma of advanced melanoma patients undergoing BRAFi/MEKi or ICIs vary according to the patients' survival outcomes (i.e. progression-free survival (PFS) and OS) and disease progression. Plasma samples of Stage III-IV melanoma patients were collected at baseline (treatment initiation) and thereafter every 3 months. Circulating BRAFV600E/K and NRASQ61R/K mutations were analysed through droplet digital PCR (ddPCR, Bio-Rad) in a total of 177 plasma samples from 48 melanoma patients (19 Stage III, 29 Stage IV). Baseline ctDNA concentration was significantly associated with OS (HR = 1.003, 95% CI = 1.000–1.006, p = 0.043) and PFS (HR = 1.004, 95% CI = 1.000–1.007, p = 0.029) independent of clinical-prognostic confounders. For each unit increase in the ∆ctDNA (concentration difference between the last follow-up and baseline) there was a 24% increased risk of disease progression, irrespective of treatment type and stage at diagnosis (OR = 1.24, 95% CI = 1.03–1.49, p = 0.020, AUC = 0.93). Patients with reduction of ctDNA level from baseline to the last follow-up had longer OS (HR = 0.14; 95% CI = 0.05–0.44, p = 0.001) and PFS (HR = 0.08; 95% CI = 0.03–0.27, p < 0.0001) compared to patients with increased ctDNA, including adjustment for confounding factors. Our findings suggest that variation of ctDNA over time during melanoma treatment reflects the clinical outcome and tumour response to therapy and might be helpful in clinical monitoring
Investigating Alaskan Methane and Carbon Dioxide Fluxes Using Measurements from the CARVE Tower
Northern high-latitude carbon sources and sinks, including those resulting from degrading permafrost, are thought to be sensitive to the rapidly warming climate. Because the near-surface atmosphere integrates surface fluxes over large ( ∼ 500–1000 km) scales, atmospheric monitoring of carbon dioxide (CO2) and methane (CH4) mole fractions in the daytime mixed layer is a promising method for detecting change in the carbon cycle throughout boreal Alaska. Here we use CO2 and CH4 measurements from a NOAA tower 17 km north of Fairbanks, AK, established as part of NASA\u27s Carbon in Arctic Reservoirs Vulnerability Experiment (CARVE), to investigate regional fluxes of CO2 and CH4 for 2012–2014. CARVE was designed to use aircraft and surface observations to better understand and quantify the sensitivity of Alaskan carbon fluxes to climate variability. We use high-resolution meteorological fields from the Polar Weather Research and Forecasting (WRF) model coupled with the Stochastic Time-Inverted Lagrangian Transport model (hereafter, WRF-STILT), along with the Polar Vegetation Photosynthesis and Respiration Model (PolarVPRM), to investigate fluxes of CO2 in boreal Alaska using the tower observations, which are sensitive to large areas of central Alaska. We show that simulated PolarVPRM–WRF-STILT CO2 mole fractions show remarkably good agreement with tower observations, suggesting that the WRF-STILT model represents the meteorology of the region quite well, and that the PolarVPRM flux magnitudes and spatial distribution are generally consistent with CO2 mole fractions observed at the CARVE tower. One exception to this good agreement is that during the fall of all 3 years, PolarVPRM cannot reproduce the observed CO2 respiration. Using the WRF-STILT model, we find that average CH4 fluxes in boreal Alaska are somewhat lower than flux estimates by Chang et al. (2014) over all of Alaska for May–September 2012; we also find that enhancements appear to persist during some wintertime periods, augmenting those observed during the summer and fall. The possibility of significant fall and winter CO2 and CH4 fluxes underscores the need for year-round in situ observations to quantify changes in boreal Alaskan annual carbon balance
Effective Menin inhibitor-based combinations against AML with MLL rearrangement or NPM1 mutation (NPM1c)
Treatment with Menin inhibitor (MI) disrupts the interaction between Menin and MLL1 or MLL1-fusion protein (FP), inhibits HOXA9/MEIS1, induces differentiation and loss of survival of AML harboring MLL1 re-arrangement (r) and FP, or expressing mutant (mt)-NPM1. Following MI treatment, although clinical responses are common, the majority of patients with AML with MLL1-r or mt-NPM1 succumb to their disease. Pre-clinical studies presented here demonstrate that genetic knockout or degradation of Menin or treatment with the MI SNDX-50469 reduces MLL1/MLL1-FP targets, associated with MI-induced differentiation and loss of viability. MI treatment also attenuates BCL2 and CDK6 levels. Co-treatment with SNDX-50469 and BCL2 inhibitor (venetoclax), or CDK6 inhibitor (abemaciclib) induces synergistic lethality in cell lines and patient-derived AML cells harboring MLL1-r or mtNPM1. Combined therapy with SNDX-5613 and venetoclax exerts superior in vivo efficacy in a cell line or PD AML cell xenografts harboring MLL1-r or mt-NPM1. Synergy with the MI-based combinations is preserved against MLL1-r AML cells expressing FLT3 mutation, also CRISPR-edited to introduce mtTP53. These findings highlight the promise of clinically testing these MI-based combinations against AML harboring MLL1-r or mtNPM1
- …