41 research outputs found
Direct Measurement of 2D and 3D Interprecipitate Distance Distributions from Atom-Probe Tomographic Reconstructions
Edge-to-edge interprecipitate distance distributions are critical for
predicting precipitation strengthening of alloys and other physical phenomena.
A method to calculate this 3D distance and the 2D interplanar distance from
atom-probe tomographic data is presented. It is applied to nanometer-sized
Cu-rich precipitates in an Fe-1.7 at.% Cu alloy. Experimental interprecipitate
distance distributions are discussed
Influence of the initial cooling rate from γ′ supersolvus temperatures on microstructure and phase compositions in a nickel superalloy
Different cooling paths from a supersolvus temperature have been applied to FGH96, a polycrystalline nickel base superalloy for turbine disc applications, in order to simulate the different microstructures that exist through the thickness of a disc following an industrial heat treatment. Secondary and tertiary γ′ precipitate size distributions and morphology have been analysed and compared for the different heat treatments using SEM and atom probe tomography (APT). Detailed compositional data for both γ′ precipitate and γ matrix are presented, and compared to equilibrium compositions calculated by Thermo-Calc. For the heat-treatments studied, the secondary γ′ composition indicates a shell of differing composition to that towards the precipitate core. From sequential equilibria compositional calculations, it is suggested that the ‘shell’ forms at a lower temperature than the precipitate core. The fine tertiary precipitates do not show the core-shell compositional differences on continuous cooling. W peaks are noted at the γ/γ′ interfacial region, which is of significance for retarding coarsening. A γ′ depletion zone surrounds the secondary precipitates, within which the γ matrix composition differs significantly to the γ far-field values, Finally, a precipitate nucleation and growth mechanistic model is suggested based on the experimental data and Thermo-Calc calculations
Development of a Refractory High Entropy Superalloy
Microstructure, phase composition and mechanical properties of a refractory high entropy superalloy, AlMo0.5NbTa0.5TiZr, are reported in this work. The alloy consists of a nano-scale mixture of two phases produced by the decomposition from a high temperature body-centered cubic (BCC) phase. The first phase is present in the form of cuboidal-shaped nano-precipitates aligned in rows along <100>-type directions, has a disordered BCC crystal structure with the lattice parameter a1 = 326.9 ± 0.5 pm and is rich in Mo, Nb and Ta. The second phase is present in the form of channels between the cuboidal nano-precipitates, has an ordered B2 crystal structure with the lattice parameter a2 = 330.4 ± 0.5 pm and is rich in Al, Ti and Zr. Both phases are coherent and have the same crystallographic orientation within the former grains. The formation of this modulated nano-phase structure is discussed in the framework of nucleation-and-growth and spinodal decomposition mechanisms. The yield strength of this refractory high entropy superalloy is superior to the yield strength of Ni-based superalloys in the temperature range of 20 °C to 1200 °C
Digital model for X-ray diffraction with application to composition and strain determination in strained InAs/GaSb superlattices
International audienc
Strengthening Mechanisms in a High-Strength Bulk Nanostructured Cu-Zn-Al Alloy Processed Via Cryomilling and Spark Plasma Sintering
A bulk nanostructured alloy with the nominal composition Cu-30Zn-0.8Al wt.% (commercial designation brass 260) was fabricated by cryomilling of brass powders and subsequent spark plasma sintering (SPS) of the cryomilled powders, yielding a compressive yield strength of 950 MPa, which is significantly higher than the yield strength of commercial brass 260 alloys (~200-400 MPa). Transmission electron microscopy investigations revealed that cryomilling results in an average grain diameter of 26 nm and a high density of deformation twins. Nearly fully dense bulk samples were obtained after SPS of cryomilled powders, with average grain diameter 110 nm. After SPS, 10 vol.% of twins is retained with average twin thickness 30 nm. Three-dimensional atom-probe tomography studies demonstrate that the distribution of Al is highly inhomogeneous in the sintered bulk samples, and Al-containing precipitates including Al(Cu,Zn)-O-N, Al-O-N and Al-N are distributed in the matrix. The precipitates have an average diameter of 1.7 nm and a volume fraction of 0.39%. Quantitative calculations were performed for different strengthening contributions in the sintered bulk samples, including grain boundary, twin boundary, precipitate, dislocation and solid-solution strengthening. Results from the analyses demonstrate that precipitate and grain boundary strengthening are the dominant strengthening mechanisms, and the calculated overall yield strength is in reasonable agreement with the experimentally determined compressive yield strength