605 research outputs found
Base-load cycling on a system with significant wind penetration
Certain developments in the electricity sector may result in suboptimal operation of base-load generating units in countries worldwide. Despite the fact they were not designed to operate in a flexible manner, increasing penetration of variable power sources coupled with the deregulation of the electricity sector could lead to these base-load units being shut down or operated at part-load levels more often. This cycling operation would have onerous effects on the components of these units and potentially lead to increased outages and significant costs. This paper shows the serious impact increasing levels of wind power will have on the operation of base-load units. Those base-load units which are not large contributors of primary reserve to the system and have relatively shorter start-up times were found to be the most impacted as wind penetration increases. A sensitivity analysis shows the presence of storage or interconnection on a power system actually exacerbates base-load cycling until very high levels of wind power are reached. Finally, it is shown that if the total cycling costs of the individual base-load units are taken into consideration in the scheduling model, subsequent cycling operation can be reduced.Thermal Power Generation; Wind Power Generation; Pumped Storage Power Generation; Interconnected Power Systems; Power System Modeling; Costs
Unit commitment for systems with significant wind penetration
The stochastic nature of wind alters the unit commitment and dispatch problem. By accounting for this uncertainty when scheduling the system, more robust schedules are produced, which should, on average, reduce expected costs. In this paper, the effects of stochastic wind and load on the unit commitment and dispatch of power systems with high levels of wind power are examined. By comparing the costs, planned operation and performance of the schedules produced, it is shown that stochastic optimization results in less costly, of the order of 0.25%, and better performing schedules than deterministic optimization. The impact of planning the system more frequently to account for updated wind and load forecasts is then examined. More frequent planning means more up to date forecasts are used, which reduces the need for reserve and increases performance of the schedules. It is shown that mid merit and peaking units and the interconnection are the most affected parts of the system where uncertainty of wind is concernedpower generation dispatch; power system economics; stochastic systems; wind power generation
Importance of Behavior and Morphological Traits for Controlling Body Temperature in Littorinid Snails
For organisms living in the intertidal zone, temperature is an important selective agent that can shape species distributions and drive phenotypic variation among populations. Littorinid snails, which occupy the upper limits of rocky shores and estuaries worldwide, often experience extreme high temperatures and prolonged aerial emersion during low tides, yet their robust physiologyâcoupled with morphological and behavioral traitsâpermits these gastropods to persist and exert strong grazing control over algal communities. We use a mechanistic heat-budget model to compare the effects of behavioral and morphological traits on the body temperatures of five species of littorinid snails under natural weather conditions. Model predictions and field experiments indicate that, for all five species, the relative contribution of shell color or sculpturing to temperature regulation is small, on the order of 0.2â2 °C, while behavioral choices such as removing the foot from the substratum or reorienting the shell can lower body temperatures by 2â4 °C on average. Temperatures in central California rarely exceeded the thermal tolerance limits of the local littorinid species during the study period, but at sites where snails are regularly exposed to extreme high temperatures, the functional significance of the tested traits may be important. The mechanistic approach used here provides the ability to gauge the importance of behavioral and morphological traits for controlling body temperature as species approach their physiological thresholds
Recommended from our members
Multicomponent metal-organic framework membranes for advanced functional composites.
The diverse chemical and structural properties of metal-organic frameworks (MOFs) make them attractive for myriad applications, but their native powder form is limiting for industrial implementation. Composite materials of MOFs hold promise as a means of exploiting MOF properties in engineered forms for real-world applications. While interest in MOF composites is growing, research to date has largely focused on utilization of single MOF systems. The vast number of different MOF structures provides ample opportunity to mix and match distinct MOF species in a single composite to prepare multifunctional systems. In this work, we describe the preparation of three types of multi-MOF composites with poly(vinylidene fluoride) (PVDF): (1) co-cast MOF MMMs, (2) mixed MOF MMMs, and (3) multilayer MOF MMMs. Finally, MOF MMMs are explored as catalytic membrane reactors for chemical transformations
A conjecture on the relationship of bacterial shape to motility in rod-shaped bacteria
We have calculated the optimal shape, i.e. the length-to-width ratio of a bacterial cell, that allows a bacterial cell to move most efficiently through liquid. For a cell of a given size, a minimum exists in the force required to move through any liquid when the length of the cell is approx. 3.7 times greater than the width. As this is in approximate agreement with the observed shape of bacteria such as the Enterobacteriaceae, we conjecture that the current observed shape of these bacteria may have been determined, in part, to obtain the most efficient shape for moving through liquids. It is also found that spherical cells are very inefficient in movement through liquid, while longer cells of a fixed size are still relatively efficient in moving through liquids. Since the optimal shape is independent of actual size (within large bounds), it is further proposed that hydrodynamic efficiency considerations support the proposal of constant shape over a range of sizes for rod-shaped bacteria.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/73818/1/j.1574-6968.1997.tb10293.x.pd
Thermal Stress on Intertidal Limpets: Long-Term Hindcasts and Lethal Limits
When coupled with long-term meteorological records, a heat-budget model for the limpet, Lottia gigantea, provides a wealth of information regarding environmental and topographic controls of body temperature in this ecologically important species. (1) The maximum body temperature predicted for any site (37.5°C) is insufficient to kill all limpets, suggesting that acute thermal stress does not set an absolute upper limit to the elevation of L. gigantea on the shore. Therefore, the upper limit must be set by behavioral responses, sublethal effects or ecological interactions. (2) Temperatures sufficient to kill limpets are reached at only a small fraction of substratum orientations and elevations and on only three occasions in 5 years. These rare predicted lethal temperatures could easily be missed in field measurements, thereby influencing the interpretation of thermal stress. (3) Body temperature is typically higher than air temperature, but maximum air temperature can nonetheless be used as an accurate predictor of maximum body temperature. Warmer air temperatures in the future may thus cause increased mortality in this intertidal species. Interpretation of the ecological effects of elevated body temperature depends strongly on laboratory measurements of thermal stress, highlighting the need for additional research on the temporal and spatial variability of thermal limits and sublethal stress. The lengthy time series of body temperatures calculated from the heat-budget model provides insight into how these physiological measurements should be conducted
Efficient Classification of Student Help Requests in Programming Courses Using Large Language Models
The accurate classification of student help requests with respect to the type
of help being sought can enable the tailoring of effective responses.
Automatically classifying such requests is non-trivial, but large language
models (LLMs) appear to offer an accessible, cost-effective solution. This
study evaluates the performance of the GPT-3.5 and GPT-4 models for classifying
help requests from students in an introductory programming class. In zero-shot
trials, GPT-3.5 and GPT-4 exhibited comparable performance on most categories,
while GPT-4 outperformed GPT-3.5 in classifying sub-categories for requests
related to debugging. Fine-tuning the GPT-3.5 model improved its performance to
such an extent that it approximated the accuracy and consistency across
categories observed between two human raters. Overall, this study demonstrates
the feasibility of using LLMs to enhance educational systems through the
automated classification of student needs
CodeHelp: Using Large Language Models with Guardrails for Scalable Support in Programming Classes
Computing educators face significant challenges in providing timely support
to students, especially in large class settings. Large language models (LLMs)
have emerged recently and show great promise for providing on-demand help at a
large scale, but there are concerns that students may over-rely on the outputs
produced by these models. In this paper, we introduce CodeHelp, a novel
LLM-powered tool designed with guardrails to provide on-demand assistance to
programming students without directly revealing solutions. We detail the design
of the tool, which incorporates a number of useful features for instructors,
and elaborate on the pipeline of prompting strategies we use to ensure
generated outputs are suitable for students. To evaluate CodeHelp, we deployed
it in a first-year computer and data science course with 52 students and
collected student interactions over a 12-week period. We examine students'
usage patterns and perceptions of the tool, and we report reflections from the
course instructor and a series of recommendations for classroom use. Our
findings suggest that CodeHelp is well-received by students who especially
value its availability and help with resolving errors, and that for instructors
it is easy to deploy and complements, rather than replaces, the support that
they provide to students
Quantifying the top-down effects of grazers on a rocky shore: selective grazing and the potential for competition
The effect of grazers on the diversity, distribution, and composition of their principal food source has rarely been described for the high intertidal zone of rocky shores, a model system for studying the potential effects of climate change. Along rocky, wave-swept shores in central California, the microphytobenthos (MPB) supports diverse assemblages of limpets and littorine snails, which, at current benign temperatures, could potentially partition food resources in a complementary fashion, thereby enhancing secondary productivity. Two limpet species in particular, Lottia scabra and L. austrodigitalis, may partition components of the MPB, and are likely to affect the composition of the MPB on which they graze. In this study, we describe the composition, nutritional value (C:N ratio), and fluorescence (an index of chlorophyll density) of ungrazed, L. scabra-grazed and L. austrodigitalis-grazed MPB, each as a function of temperature. Fluorescence decreased with increased average daily maximum temperature for ungrazed MPB, but temperature had no discernible effects on either fluorescence or the composition of the MPB of grazed assemblages. L. austrodigitalis and L. scabra did not partition the MPB, and did not exhibit complementarity. Both species exhibited an ordered grazing scheme, in which limpets grazed down certain components of the MPB before others, and grazing increased the C:N ratio of the MPB, decreasing its nutritional value. Taken together, these results suggest that L. austrodigitalis and L. scabra may experience increased competition as warming temperatures reduce the available MP
- âŠ