134 research outputs found
Resistive Switching in Metal Oxide/Organic Semiconductor Nonvolatile Memories
Diodes incorporating a bilayer of a metal oxide and an organic semiconductor can show unipolar, nonvolatile memory behavior after electroforming. Electroforming involves dielectric breakdown induced by prolonged bias voltage stress. When the power dissipated during breakdown is limited, electroforming is reversible and involves formation of defects at the organic-oxide interface that can heal spontaneously. When the power dissipation during breakdown exceeds a certain threshold, electroforming becomes irreversible. The fully electroformed diodes show electrical bistability, featuring (meta)stable states with low and high conduction that can be programmed by voltage pulses. The high conduction results from current flowing via filamentary paths. The bistability is explained by the coexistence of two thermodynamically stable phases at the interface between semiconductor and oxide. One phase contains mainly ionized defects and has a low work function, while the other phase has mainly neutral defects and a high work function. In the diodes, domains of the phase with low work function give rise to current filaments. In the filaments, Joule heating will raise temperature locally. When the temperature exceeds the critical temperature, the filament will switch off. The switching involves a collective recombination of charge carriers trapped at the defects as evidenced by bursts of electroluminescence
Organic non-volatile memories from ferroelectric phase-separated blends
New non-volatile memories are being investigated to keep up with the organic-electronics road map(1). Ferroelectric polarization is an attractive physical property as the mechanism for non-volatile switching, because the two polarizations can be used as two binary levels(2). However, in ferroelectric capacitors the read-out of the polarization charge is destructive(3). The functionality of the targeted memory should be based on resistive switching. In inorganic ferroelectrics conductivity and ferroelectricity cannot be tuned independently. The challenge is to develop a storage medium in which the favourable properties of ferroelectrics such as bistability and non-volatility can be combined with the beneficial properties provided by semiconductors such as conductivity and rectification. Here we present an integrated solution by blending semiconducting and ferroelectric polymers into phase-separated networks. The polarization field of the ferroelectric modulates the injection barrier at the semiconductor-metal contact. The combination of ferroelectric bistability with (semi) conductivity and rectification allows for solution-processed non-volatile memory arrays with a simple cross-bar architecture that can be read out nondestructively. The concept of an electrically tunable injection barrier as presented here is general and can be applied to other electronic devices such as light-emitting diodes with an integrated on/off switch.</p
Electrical conduction of LiF interlayers in organic diodes
An interlayer of LiF in between a metal and an organic semiconductor is commonly used to improve the electron injection. Here, we investigate the effect of moderate bias voltages on the electrical properties of Al/LiF/poly(spirofluorene)/Ba/Al diodes by systematically varying the thickness of the LiF layer (2-50 nm). Application of forward bias V below the bandgap of LiF (V < E-g similar to 14 V) results in reversible formation of an electrical double layer at the LiF/poly(spirofluorene) hetero-junction. Electrons are trapped on the poly(spirofluorene) side of the junction, while positively charged defects accumulate in the LiF with number densities as high as 10(25)/m(3). Optoelectronic measurements confirm the built-up of aggregated, ionized F centres in the LiF as the positive trapped charges. The charged defects result in efficient transport of electrons from the polymer across the LiF, with current densities that are practically independent of the thickness of the LiF layer. (C) 2015 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution 3.0 Unported License.Fundacao para Ciencia e Tecnologia (FCT) through the research Instituto de Telecommunicacoes (IT-Lx); project Memristor based Adaptive Neuronal Networks (MemBrAiNN) [PTDC/CTM-NAN/122868/2010]; KAU [71-100-35-HiCi]; European Community [212311]; ONE-P; Dutch Ministry of Education, Culture and Science [024.001.035]info:eu-repo/semantics/publishedVersio
Unipolar resistive switching in metal oxide/organic semiconductor non-volatile memories as a critical phenomenon
Diodes incorporating a bilayer of an organic semiconductor and a wide bandgap metal oxide can show unipolar, non-volatile memory behavior after electroforming. The prolonged bias voltage stress induces defects in the metal oxide with an areal density exceeding 10(17) m(-2). We explain the electrical bistability by the coexistence of two thermodynamically stable phases at the interface between an organic semiconductor and metal oxide. One phase contains mainly ionized defects and has a low work function, while the other phase has mainly neutral defects and a high work function. In the diodes, domains of the phase with a low work function constitute current filaments. The phase composition and critical temperature are derived from a 2D Ising model as a function of chemical potential. The model predicts filamentary conduction exhibiting a negative differential resistance and nonvolatile memory behavior. The model is expected to be generally applicable to any bilayer system that shows unipolar resistive switching. (C) 2015 Author(s).Dutch Polymer Institute (DPI), BISTABLE [704]; Fundacao para Ciencia e Tecnologia (FCT) through the research Instituto de Telecommunicacoes (IT-Lx); project Memristor based Adaptive Neuronal Networks (MemBrAiNN) [PTDC/CTM-NAN/122868/2010]; European Community Seventh Framework Programme FP7', ONE-P [212311]; Dutch Ministry of Education, Culture and Science (Gravity Program) [024.001.035]info:eu-repo/semantics/publishedVersio
High mobility n-channel organic field-effect transistors based on soluble C60 and C70 fullerene derivatives
We report on n-channel organic field-effect transistors (OFETs) based on the solution processable methanofullerenes [6,6]-phenyl-C61-butyric acid ester ([60]PCBM) and [6,6]-phenyl-C71-butyric acid methyl ester ([70]PCBM). Despite the fact that both derivatives form glassy films when processed from solution, their electron mobilities are high and on the order of 0.21 cm2/V s and 0.1 cm2/V s, for [60]PCBM and [70]PCBM, respectively. Although the derived mobility of [60]PCBM is comparable to the best values reported in the literature, the electron mobility of [70]PCBM is the highest value reported to date for any C70 based molecule. We note that this is the only report in which C60 and C70 methanofullerenes exhibit comparable electron mobilities. The present findings could have significant implications in the area of large-area organic electronics and organic photovoltaics where C60 derivatives have so far been the most widely used electron acceptor materials.
Intrinsic and extrinsic resistive switching in a planar diode based on silver oxide nanoparticles
Resistive switching is investigated in thin-film planar diodes using silver oxide nanoparticles capped in a polymer. The conduction channel is directly exposed to the ambient atmosphere. Two types of switching are observed. In air, the hysteresis loop in the current–voltage characteristics is S-shaped. The high conductance state is volatile and unreliable. The switching is mediated by moisture and electrochemistry. In vacuum, the hysteresis loops are symmetric, N-shaped and exhibit a negative differential resistance region. The conductance states are non-volatile with good data retention, programming cycling endurance and large current modulation ratio. The switching is attributed to electroforming of silver oxide clusters
- …