19 research outputs found
Study of damage of t-joint components by using different non-destructive techniques
The present research is focused on the use of different non-destructive techniques for detecting damage in CFRP composite structures obtained by an innovative technological process: Automated Fiber Placement. The component was a T-joint stringer adhesively bonded to a skin panel. The aim of the present work is to show the capability of these techniques to provide complementary information for detecting the damage in composites. Automated Fibre Placement consists in an automatic deposing of prepeg or dry plies on a specific mould. The innovation lies in the possibility to reduce the time of the manufacturing process of large and complex structures by using a robotic arm that contemporary deposes fibre tows and pre-polymerizes them. The resulting products present higher quality in terms of surface finish, internal flaws absent and higher mechanical properties. The T-joint component tested in the present research was addressed to both static and cyclic tests. After the damage was induced in the material it was performed a qualitative and quantitative study of the damage by using different nondestructive techniques: Thermoelastic stress analysis (TSA), Ultrasound tests (UT) and displacement/strain measurements provided by strain gages. Processing and post-processing procedures were developed to analyze the data from each tests and finally the comparison of the results allowed a complete characterization and an overview of damage in the component by observing specifically where and when it occurred and how many regions of the component were interested. Finally, dimension, shape and depth where assessed
Estimation of the Dissipative Heat Sources Related to the Total Energy Input of a CFRP Composite by Using the Second Amplitude Harmonic of the Thermal Signal
Theories for predicting the fatigue behaviour of composite laminates often make strong assumptions on the damage mechanisms that strongly depend on the designed laminate lay-up. In this regard, several physical and empirical models were proposed in the literature that generally require experimental validations. The experimental techniques, such as thermography, also provide useful tools for monitoring the behaviour of the specific material so, that they can be used to support the study of the damage mechanisms of materials. In this research, the second amplitude harmonic of the thermal signal has been investigated and used to assess the relationship with the total energy input in order to estimate the fatigue strength of the material. A thermal index was assessed by monitoring the constant amplitude tests (S/N curve) that were performed on a quasi-isotropic carbon fibre reinforced polymer (CFRP) laminate obtained by the automated fibre placement process. The obtained results demonstrated the capability of the second amplitude harmonic of the thermal signal to describe and monitor the fatigue damage
Fatigue and Fracture Behavior of Composite Materials
Presently, composites are one of the top-of-the-range materials used in different industrial sectors and represent the best alternative to metal alloys in those applications where higher mechanical properties and lower weights are required [...
Determination of dissipated energies during fatigue tests on Copper and AA7475 with Infrared Thermography
Assessment of the quality of adhesive bond in t-joints coupons by using thermoelastic stress analysis
Adhesively bonded joints represent an interesting alternative to mechanical joints due to the advantages over conventional mechanical fasteners: continuity of the structure, high strength-to-weight ratio, design flexibility. The aim of this work is to assess and predict the quality of aeronautical adhesive bonded CFRP T-joints made by the automated fibre placement process by means of the Thermoelastic Stress analysis (TSA) technique used as non-destructive technique. The results provided by TSA technique, in terms of debonded area, were compared to the well-established lock-in thermography technique showing the capability of TSA to evaluate the quality of T-joints. The approach allows to perform a cost-efficient characterisation process by means of non-destructive evaluations
Thermoelastic stress analysis as a method for the quantitative non-destructive evaluation of bonded CFRP T-joints
Adhesive bonding is a material joining process in which an adhesive, placed between the surfaces, solidifies to produce a strong bond. In this regard, adhesively bonded joints represent an interesting alternative to mechanical joints and provide many advantages over conventional mechanical fasteners: continuity of the structure, high strength-to-weight ratio, design flexibility, and easiness of fabrication. In the present research, the Thermoelastic Stress Analysis (TSA) technique has been used as a non-destructive tool for evaluating the mechanical behaviour of aeronautical adhesive bonded CFRP T-joints made by automated fibre placement process. Moreover, the thermoelastic signal was used for determining the debonded areas after the pull-off tests. The results in terms of the measured debonded area were compared to the well-established lock-in thermography technique. The capability of the Thermoelastic Stress Analysis to perform an in-depth study of the quality of T-joints has been demonstrated
Evaluation of damage in composites by using thermoelastic stress analysis: A promising technique to assess the stiffness degradation
The stiffness degradation represents one of the most interesting damage phenomena used for describing the fatigue behaviour of composites. A critical aspect of modelling the damage is represented by the simulation of the whole behaviour of the composite and by the assessment of the actual stiffness for the models validation. In this work, the stiffness degradation of quasi-isotropic carbon fibre reinforced polymer (CFRP) obtained by automated fibre placement has been assessed by means of thermoelastic stress analysis. The amplitude of temperature signal at the mechanical frequency (thermoelastic signal) was considered as an indicator of material degradation and compared with the data provided by an extensometer. The correlation between thermoelastic and mechanical data allowed to build a new experimental model for evaluating and predicting material stiffness degradation by just using thermoelastic data. The proposed approach seems to be very promising for stiffness degradation assessment of real and complex mechanical components subjected to actual loading conditions
Mechanical Behaviour of Stainless Steels under Dynamic Loading: An Investigation with Thermal Methods
Stainless steels are the most exploited materials due to their high mechanical strength and versatility in producing different alloys. Although there is great interest in these materials, mechanical characterisation, in particular fatigue characterisation, requires the application of several standardised procedures involving expensive and time-consuming experimental campaigns. As a matter of fact, the use of Standard Test Methods does not rely on a physical approach, since they are based on a statistical evaluation of the fatigue limit with a fixed probabilistic confidence. In this regard, Infra-Red thermography, the well-known, non-destructive technique, allows for the development of an approach based on evaluation of dissipative sources. In this work, an approach based on a simple analysis of a single thermographic sequence has been presented, which is capable of providing two indices of the damage processes occurring in material: the phase shift of thermoelastic signal φ and the amplitude of thermal signal at twice the loading frequency, S2. These thermal indices can provide synergetic information about the mechanical (fatigue and fracture) behaviour of austenitic AISI 316L and martensitic X4 Cr Ni Mo 16-5-1; since they are related to different thermal effects that produce damage phenomena. In particular, the use of φ and S2 allows for estimation of the fatigue limit of stainless steels at loading ratio R = 0.5 in agreement with the applied Standard methods. Within Fracture Mechanics tests, both indices demonstrate the capacity to localize the plastic zone and determine the position of the crack tip. Finally, it will be shown that the value of the thermoelastic phase signal can be correlated with the mechanical behaviour of the specific material (austenitic or martensitic)
A multianalysis thermography-based approach for fatigue and damage investigations of ASTM A182 F6NM steel at two stress ratios
Infrared thermography allows an alternative energy-based approach for studying the fatigue behaviour of materials to better understand damage phenomena. In particular, the methodology of infrared thermography can explain the complex dissipative mechanisms promoted by the input parameters, such as the loading ratio, can rapidly provide information about the fatigue strength, and has low cost. In this work, analysis of the thermographic sequences of ASTM A 182 grade F6NM steel obtained during fatigue testing provided four thermal indexes that were used to investigate the thermoelastic and plastic behaviour of material. Fatigue tests at two opportunely chosen loading ratios (R = −0.1, R = 0.5) were performed to investigate the relation between the material behaviour and each index at a specific loading ratio. Finally, estimation of the fatigue strength by means of suitable analysis procedures allowed for an investigation of the damage behaviour of materials under specific loading conditions
On the relationship between mechanical energy rate and heat dissipated rate during fatigue for a C45 steel depending on stress ratio
This work deals with the analysis in the frequency domain of the temperature signal and mechanical energy rate of C45 steel under two different fatigue stepwise loading series at stress ratios of 0.1 and −1. It was first investigated the energy distribution among the harmonic components of the signals to understand possible variations caused by a different stress ratio. In addition, the second amplitude harmonic (SAH) of heat dissipated and mechanical energy rates have been considered in the analysis, and their relationship was investigated. It has been shown as it depends only on the material, and hence, it is valid whatever the kind of the test is without any assumption on the energy supplied to the material or material hysteresis loop stabilization. The adopted approach allows the analysis of intrinsic dissipations by means of rapid, full-field, and contactless techniques without any specific requirement on loading condition or temperature signal stabilization