Analysis of second harmonic generation in photonic-crystal-assisted waveguides

We study second harmonic generation in a planar dielectric waveguide having a low-index, polymer core layer, bounded by two multilayer stacks. This geometry allows exceptionally strong confinement of the light at the fundamental wavelength inside the core region with virtually zero net propagation losses for distances that exceed several centimeters, provided material and scattering losses are neglected. A phase-matched configuration of the waveguide is reported in which the pump signal is the lowest-order mode of the waveguide, and the generated second harmonic signal corresponds to the third propagation mode of the waveguide. Using a polymer waveguide core, having chi(2)=100 pm/V, we predict a conversion efficiency of approximately 90% after a propagation distance of 2 mm, using peak pump intensities inside the core of the waveguide of 1.35 GW/cm^2. If the waveguide core contains polymer layers with different glass transition temperatures, the layers can be poled independently to maximize the overlap integral, and similar pump depletions may be achieved over a distance of approximately 500 microns.Comment: 20 pages, 7 figures, 330k

Kaon physics with the KLOE detector

In this paper we discuss the recent finalized analyses by the KLOE experiment at DA$\Phi$NE: the CPT and Lorentz invariance test with entangled $K^0 \bar{K}^0$ pairs, and the precision measurement of the branching fraction of the decay ${ K^+} \rightarrow \pi^+\pi^-\pi^+(\gamma)$. We also present the status of an ongoing analysis aiming to precisely measure the $K^{\pm}$ mass

Key factors affecting the compressive strength of foamed concrete

This contribution aims to highlight, from an experimental point of view, the key factors affecting the compressive strength of foamed concrete. An experimental campaign has been conducted on a broad group of cubic specimens made of foamed concrete under compression tests at 28 days. In addition to the obvious influence of the density on the achievement of the compressive strength, other factors have been studied. In particular, three different curing conditions, three foaming agents with either synthetic or protein nature, two different cement types, and three water/cement ratios have been included in this experimental investigation. As a result of this experimental campaign, it has been found that the not only the density, but also the foaming agent and the water/cement ratio play a major role in the strength achievement of the foamed concrete. It is also demonstrated that the combination of the foaming agent with a particular water/cement ratio is a crucial parameter affecting the compressive strength of this material

An all-glass microfluidic network with integrated amorphous silicon photosensors for on-chip monitoring of enzymatic biochemical assay

A lab-on-chip system, integrating an all-glass microfluidics and on-chip optical detection, was developed and tested. The microfluidic network is etched in a glass substrate, which is then sealed with a glass cover by direct bonding. Thin film amorphous silicon photosensors have been fabricated on the sealed microfluidic substrate preventing the contamination of the micro-channels. The microfluidic network is then made accessible by opening inlets and outlets just prior to the use, ensuring the sterility of the device. The entire fabrication process relies on conventional photolithographic microfabrication techniques and is suitable for low-cost mass production of the device. The lab-on-chip system has been tested by implementing a chemiluminescent biochemical reaction. The inner channel walls of the microfluidic network are chemically functionalized with a layer of polymer brushes and horseradish peroxidase is immobilized into the coated channel. The results demonstrate the successful on-chip detection of hydrogen peroxide down to 18 mu M by using luminol and 4-iodophenol as enhancer agent

The physics of spreading processes in multilayer networks

The study of networks plays a crucial role in investigating the structure, dynamics, and function of a wide variety of complex systems in myriad disciplines. Despite the success of traditional network analysis, standard networks provide a limited representation of complex systems, which often include different types of relationships (i.e., "multiplexity") among their constituent components and/or multiple interacting subsystems. Such structural complexity has a significant effect on both dynamics and function. Throwing away or aggregating available structural information can generate misleading results and be a major obstacle towards attempts to understand complex systems. The recent "multilayer" approach for modeling networked systems explicitly allows the incorporation of multiplexity and other features of realistic systems. On one hand, it allows one to couple different structural relationships by encoding them in a convenient mathematical object. On the other hand, it also allows one to couple different dynamical processes on top of such interconnected structures. The resulting framework plays a crucial role in helping achieve a thorough, accurate understanding of complex systems. The study of multilayer networks has also revealed new physical phenomena that remain hidden when using ordinary graphs, the traditional network representation. Here we survey progress towards attaining a deeper understanding of spreading processes on multilayer networks, and we highlight some of the physical phenomena related to spreading processes that emerge from multilayer structure.Comment: 25 pages, 4 figure