First-principles calculation of the elastic dipole tensor of a point defect: Application to hydrogen in α-zirconium

The elastic dipole tensor is a fundamental quantity relating the elastic field and atomic structure of a point defect. We review three methods in the literature to calculate the dipole tensor and apply them to hydrogen in α -zirconium using density functional theory (DFT). The results are compared with the dipole tensor deduced from earlier experimental measurements of the λ tensor for hydrogen in α -zirconium. There are significant errors with all three methods. We show that calculation of the λ tensor, in combination with experimentally measured elastic constants and lattice parameters, yields dipole tensor components that differ from experimental values by only 10%–20%. There is evidence to suggest that current state-of-the-art DFT calculations underestimate bonding between hydrogen and α -zirconium

Elastodynamic image forces on dislocations.

The elastodynamic image forces on edge and screw dislocations in the presence of a planar-free surface are derived. The explicit form of the elastodynamic fields of an injected, quiescent screw dislocation are also derived. The resulting image forces are affected by retardation effects: the dislocations experience no image force for a period of time defined by the arrival and reflection at the free surface of the dislocation fields. For the case of injected, stationary dislocations, it is shown that the elastodynamic image force tends asymptotically to the elastotatic prediction. For the case of injected, moving dislocations, it is shown that the elastodynamic image force on both the edge and the screw dislocations is magnified by inertial effects, and becomes increasingly divergent with time; this additional effect, missing in the elastostatic description, is shown to be substantial even for slow moving dislocations. Finally, it is shown that the elastodynamic image force of an edge dislocation moving towards the surface at the Rayleigh wave speed becomes repulsive, rather than attractive; this is suggestive of instabilities at the core of the dislocation, and likely resonances with the free surface.EPSRC via the EPSRC Doctoral Prize Fellowship progra

The injection of a screw dislocation into a crystal: Atomistics vs. continuum elastodynamics

EPSR

A dynamic discrete dislocation plasticity method for the simulation of plastic relaxation under shock loading

In this article, it is demonstrated that current methods of modelling plasticity as the collective motion of discrete dislocations, such as two-dimensional discrete dislocation plasticity (DDP), are unsuitable for the simulation of very high strain rate processes (106 s-1 or more) such as plastic relaxation during shock loading. Current DDP models treat dislocations quasi-statically, ignoring the time-dependent nature of the elastic fields of dislocations. It is shown that this assumption introduces unphysical artefacts into the system when simulating plasticity resulting from shock loading. This deficiency can be overcome only by formulating a fully time-dependent elastodynamic description of the elastic fields of discrete dislocations. Building on the work of Markenscoff & Clifton, the fundamental time-dependent solutions for the injection and non-uniform motion of straight edge dislocations are presented. The numerical implementation of these solutions for a single moving dislocation and for two annihilating dislocations in an infinite plane are presented. The application of these solutions in a two-dimensional model of timedependent plasticity during shock loading is outlined here and will be presented in detail elsewhere. © 2013 The Author(s) Published by the Royal Society. All rights reserved

A Dynamic Discrete Dislocation Plasticity study of elastodynamic shielding of stationary cracks

Employing Dynamic Discrete Dislocation Plasticity (D3P), an elastodynamic analysis of the shielding of a stationary crack tip by dislocations is studied. Dislocations are generated via Frank–Read sources, and make a negligible contribution to the shielding of the crack tip, whereas dislocations generated at the crack tip via homogeneous nucleation dominate the shielding. Their effect is found to be highly localised around the crack, leading to a magnification of the shielding when compared to time-independent, elastostatic predictions. The resulting attenuation of K$|_{I}$(t) is computed, and is found to be directly proportional to the applied load and to $\sqrt{t}$.EPSR

High-speed fixed-target serial virus crystallography

We report a method for serial X-ray crystallography at X-ray free-electron lasers (XFELs), which allows for full use of the current 120-Hz repetition rate of the Linear Coherent Light Source (LCLS). Using a micropatterned silicon chip in combination with the high-speed Roadrunner goniometer for sample delivery, we were able to determine the crystal structures of the picornavirus bovine enterovirus 2 (BEV2) and the cytoplasmic polyhedrosis virus type 18 polyhedrin, with total data collection times of less than 14 and 10 min, respectively. Our method requires only micrograms of sample and should therefore broaden the applicability of serial femtosecond crystallography to challenging projects for which only limited sample amounts are available. By synchronizing the sample exchange to the XFEL repetition rate, our method allows for most efficient use of the limited beam time available at XFELs and should enable a substantial increase in sample throughput at these facilities

Functional intercomparison of intraoperative radiotherapy equipment – Photon Radiosurgery System

BACKGROUND: Intraoperative Radiotherapy (IORT) is a method by which a critical radiation dose is delivered to the tumour bed immediately after surgical excision. It is being investigated whether a single high dose of radiation will impart the same clinical benefit as a standard course of external beam therapy. Our centre has four Photon Radiosurgery Systems (PRS) currently used to irradiate breast and neurological sites. MATERIALS AND METHODS: The PRS comprises an x-ray generator, control console, quality assurance tools and a mobile gantry. We investigated the dosimetric characteristics of each source and its performance stability over a period of time. We investigated half value layer, output diminution factor, internal radiation monitor (IRM) reproducibility and depth-doses in water. The half value layer was determined in air by the broad beam method, using high purity aluminium attenuators. To quantify beam hardening at clinical depths, solid water attenuators of 5 and 10 mm were placed between the x-ray probe and attenuators. The ion chamber current was monitored over 30 minutes to deduce an output diminution factor. IRM reproducibility was investigated under various exposures. Depth-dose curves in water were obtained at distances up to 35 mm from the probe. RESULTS: The mean energies for the beam attenuated by 5 and 10 mm of solid water were derived from ICRU Report 17 and found to be 18 and 24 keV. The average output level over a period of 30 minutes was found to be 99.12%. The average difference between the preset IRM limit and the total IRM count was less than 0.5%. For three x-ray sources, the average difference between the calculated and actual treatment times was found to be 0.62% (n = 30). The beam attenuation in water varied by approximately 1/r(3). CONCLUSION: The x-ray sources are stable over time. Most measurements were found to lie within the manufacturer's tolerances and an intercomparison of these checks suggests that the four x-ray sources have similar performance characteristics

Comparative risk judgements for oral health hazards among Norwegian adults: a cross sectional study

BACKGROUND: This study identified optimistic biases in health and oral health hazards, and explored whether comparative risk judgements for oral health hazards vary systematically with socio-economic characteristics and self-reported risk experience. METHODS: A simple random sample of 1,190 residents born in 1972 was drawn from the population resident in three counties of Norway. A total of 735 adults (51% women) completed postal questionnaires at home. RESULTS: Mean ratings of comparative risk judgements differed significantly (p < 0.001) from the mid point of the scales. T-values ranged from -13.1 and -12.1 for the perceived risk of being divorced and loosing all teeth to -8.2 and -7.8 (p < 0.001) for having gum disease and toothdecay. Multivariate analyses using General Linear Models, GLM, revealed gender differences in comparative risk judgements for gum disease, whereas social position varied systematically with risk judgements for tooth decay, gum disease and air pollution. The odds ratios for being comparatively optimistic with respect to having gum disease were 2.9, 1.9, 1.8 and 1.5 if being satisfied with dentition, having a favourable view of health situation, and having high and low involvement with health enhancing and health detrimental behaviour, respectively. CONCLUSION: Optimism in comparative judgements for health and oral health hazards was evident in young Norwegian adults. When judging their comparative susceptibility for oral health hazards, they consider personal health situation and risk behaviour experience

Angular and Current-Target Correlations in Deep Inelastic Scattering at HERA

Correlations between charged particles in deep inelastic ep scattering have been studied in the Breit frame with the ZEUS detector at HERA using an integrated luminosity of 6.4 pb-1. Short-range correlations are analysed in terms of the angular separation between current-region particles within a cone centred around the virtual photon axis. Long-range correlations between the current and target regions have also been measured. The data support predictions for the scaling behaviour of the angular correlations at high Q2 and for anti-correlations between the current and target regions over a large range in Q2 and in the Bjorken scaling variable x. Analytic QCD calculations and Monte Carlo models correctly describe the trends of the data at high Q2, but show quantitative discrepancies. The data show differences between the correlations in deep inelastic scattering and e+e- annihilation.Comment: 26 pages including 10 figures (submitted to Eur. J. Phys. C

Adult videogame consumption as individualised, episodic progress

Drawing from phenomenological interviews with 24 adult videogamers, we explore videogame consumption as a source of individualised, episodic progress. We first consider the relationship between play, progress, technology and the market. We then document adults' accounts of progress through the acquisition of new consoles and software, in the accumulation of in-game resources, and in creative achievements within videogames. Alongside an understanding of technological improvements as representing both technological and personal progress, we see how individuals may also turn to videogames in search of quick and easy episodes of achievement; here, progress is not some grand plan, but a series of small events helpfully structured by the latest game releases. Thus, in a society which aspires to a life where things ‘get better’ and time is usefully spent, adults who fail to actualise progress elsewhere may use videogames and related hardware to perform the idea of achievement as individualised episodes of play. In integrating the accepted cultural idea of progress, perceptions of adult play as ‘frivolous’ can be overcome and such practices may be normalised as a legitimate adult activity. However, play emerges from its frivolousness as legitimate only in compensating for working practices that remain alienated through technology-driven productivity, and through the latest technological commodities. The enjoyable nature of games as a leisure pursuit can become overshadowed by an obligation to achieve at the same time as distancing players from areas of their lives where progress is not experienced