1,267 research outputs found
Recommended from our members
Lower-Cost, Lower-Carbon Production of Circular Polydiketoenamine Plastics
The efficiency by which monomers may be recovered during the chemical recycling of plastic waste has thus far dominated the discussion over which future polymer chemistries might be more sustainable than those in use today. However, at scale, other factors emerge as equally important, such as the costs of primary versus secondary resin production as well as the energy and carbon intensity of circular manufacturing processes. We apply systems analysis to identify problematic chemical processes used for the primary production of plastics designed for infinite recyclability: polydiketoenamine (PDK) resins from novel triketone and amine monomers. Leveraging this knowledge, we advance a less intensive process for triketone production, which lowers the cost of primary PDK production by 57% and results in 66% less life-cycle greenhouse gas (GHG) emissions. Using the automotive sector as a case study, we discuss the impact of replacing nonrecyclable polyurethane with circular PDK over the next 60 years. We find that the cumulative GHG emissions associated with introducing PDK are half those of staying the course with polyurethane. However, the extent to which circularity is realized through targeted collection and sorting plays the dominant role in determining how much of those savings is practically achievable
Leveling the cost and carbon footprint of circular polymers that are chemically recycled to monomer
Mechanical recycling of polymers downgrades them such that they are unusable after a few cycles. Alternatively, chemical recycling to monomer offers a means to recover the embodied chemical feedstocks for remanufacturing. However, only a limited number of commodity polymers may be chemically recycled, and the processes remain resource intensive. We use systems analysis to quantify the costs and life-cycle carbon footprints of virgin and chemically recycled polydiketoenamines (PDKs), next-generation polymers that depolymerize under ambient conditions in strong acid. The cost of producing virgin PDK resin using unoptimized processes is ~30-fold higher than recycling them, and the cost of recycled PDK resin ($1.5 kg−1) is on par with PET and HDPE, and below that of polyurethanes. Virgin resin production is carbon intensive (86 kg CO2e kg−1), while chemical recycling emits only 2 kg CO2e kg−1. This cost and emissions disparity provides a strong incentive to recover and recycle future polymer waste
Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 1: Summary
These reports present the results of the 2013 Community Summer Study of the
APS Division of Particles and Fields ("Snowmass 2013") on the future program of
particle physics in the U.S. Chapter 1 contains the Executive Summary and the
summaries of the reports of the nine working groups.Comment: 51 page
Limits on WWgamma and WWZ Couplings from W Boson Pair Production
The results of a search for W boson pair production in pbar-p collisions at
sqrt{s}=1.8 TeV with subsequent decay to emu, ee, and mumu channels are
presented. Five candidate events are observed with an expected background of
3.1+-0.4 events for an integrated luminosity of approximately 97 pb^{-1}.
Limits on the anomalous couplings are obtained from a maximum likelihood fit of
the E_T spectra of the leptons in the candidate events. Assuming identical
WWgamma and WWZ couplings, the 95 % C.L. limits are -0.62<Delta_kappa<0.77
(lambda = 0) and -0.53<lambda<0.56 (Delta_kappa = 0) for a form factor scale
Lambda = 1.5 TeV.Comment: 10 pages, 1 figure, submitted to Physical Review
Status of Muon Collider Research and Development and Future Plans
The status of the research on muon colliders is discussed and plans are
outlined for future theoretical and experimental studies. Besides continued
work on the parameters of a 3-4 and 0.5 TeV center-of-mass (CoM) energy
collider, many studies are now concentrating on a machine near 0.1 TeV (CoM)
that could be a factory for the s-channel production of Higgs particles. We
discuss the research on the various components in such muon colliders, starting
from the proton accelerator needed to generate pions from a heavy-Z target and
proceeding through the phase rotation and decay ()
channel, muon cooling, acceleration, storage in a collider ring and the
collider detector. We also present theoretical and experimental R & D plans for
the next several years that should lead to a better understanding of the design
and feasibility issues for all of the components. This report is an update of
the progress on the R & D since the Feasibility Study of Muon Colliders
presented at the Snowmass'96 Workshop [R. B. Palmer, A. Sessler and A.
Tollestrup, Proceedings of the 1996 DPF/DPB Summer Study on High-Energy Physics
(Stanford Linear Accelerator Center, Menlo Park, CA, 1997)].Comment: 95 pages, 75 figures. Submitted to Physical Review Special Topics,
Accelerators and Beam
Measurement of the Boson Mass
A measurement of the mass of the boson is presented based on a sample of
5982 decays observed in collisions at
= 1.8~TeV with the D\O\ detector during the 1992--1993 run. From a
fit to the transverse mass spectrum, combined with measurements of the
boson mass, the boson mass is measured to be .Comment: 12 pages, LaTex, style Revtex, including 3 postscript figures
(submitted to PRL
Search for Top Squark Pair Production in the Dielectron Channel
This report describes the first search for top squark pair production in the
channel stop_1 stopbar_1 -> b bbar chargino_1 chargino_1 -> ee+jets+MEt using
74.9 +- 8.9 pb^-1 of data collected using the D0 detector. A 95% confidence
level upper limit on sigma*B is presented. The limit is above the theoretical
expectation for sigma*B for this process, but does show the sensitivity of the
current D0 data set to a particular topology for new physics.Comment: Five pages, including three figures, submitted to PRD Brief Report
- …