Tecniche integrate di Remote Sensing e GIS a supporto della stima del potenziale fotovoltaico su tetti in aree urbane

Le ultime linee guida approvate dal Governo Italiano per sostenere finanziariamente il fotovoltaico (PV) e lo sviluppo della produzione di energia solare (Quarto e Quinto Conto Energia, Gennaio 2012 e succ.), al fine di evitare il consumo di suolo in aree agricole o naturali, comprendono indicazioni specifiche che rendono più vantaggiosa l’installazione d’impianti su tetti o superfici di copertura di edifici. In questo contesto diventa importante, per una adeguata attività di pianificazione e monitoraggio del PV, la mappatura estensiva delle superfici a disposizione, coincidenti con i tetti e l’accurata valutazione del loro potenziale fotovoltaico. Dal momento che tali coperture si trovano soprattutto nelle aree urbane o industriali, in cui fattori come eterogeneità tridimensionale, albedo, torbidità atmosferica ed ombreggiamenti reciproci influenzano in modo significativo l’irraggiamento solare locale, è necessario tenere conto adeguatamente di questi elementi mediante una mappatura GIS tridimensionale ed avanzati strumenti di modellazione, in modo da stimare efficacemente la radianza solare disponibile a livello dei tetti. La metodologia implementata, basata su tecniche di telerilevamento e GIS, ha permesso di valutare e mappare la radiazione solare globale su tutti i tetti presenti nel territorio del Comune di Avellino. Partendo da dati di tipo LIDAR, è stato ottenuto in primo luogo il DSM di tutta l’area di interesse (~ 42 Km2), quindi il modello tridimensionale di ogni edificio da cui sono stati derivati i parametri geometrici di tutte le coperture. Per tenere conto della trasparenza atmosferica e della percentuale di radiazione solare (diffusa/diretta) sulle superfici di interesse, sono stati utilizzati i dati e gli strumenti applicativi presenti sul sito web PVGIS, sviluppato dalla UE. L’elaborazione finale, basata sull’utilizzo di strumenti GIS anche di tipo open source, ha permesso di ottenere le mappe di radianza solare e di potenziale PV per tutti i tetti presenti nell’area di studio.The last guidelines approved by Italian government to financially support the solar Photovoltaic (PV) Energy production development (Fourth and Fifth feed-in-scheme, January 2012 and later), in order to avoid soil consumption in agricultural or naturals areas, include specific indications for more advantageously funding the installations exploiting roofs or covers surfaces. In this context it becomes important, for a suitable PV planning and monitoring, the extensive mapping of the available surfaces extent, usually corresponding to covers and properly assessing their quality in term of PV potential. Since the covers are mainly located in urban or industrial areas, whose 3D heterogeneity, albedo, atmospheric turbidity and casting shadows significantly influence the local solar irradiance, it is necessary to suitably account for these distributed factors by means of GIS mapping and advanced modeling tools in order to provide realistic estimates of solar available radiance at roofs level. The implemented methodology, based on remote sensing techniques, has allowed to estimate and map the global solar radiance over all the roofs within Avellino municipality. Starting from LIDAR data, DSM of the entire area of interest (~42 Km2) has been firstly obtained; then the 3D model of each building and related cover has been derived. To account for the atmospheric transparency and the related time-dependent diffuse/direct radiation percentage on the area, data and tools from EU PVGIS web application have been also used. The final processing to obtain the solar radiance maps has been carried out using specific software modules available within commercial and open-source GIS packages

An overview of the Italian forest biodiversity and its conservation level, based on the first outcomes of the 4th Habitat Report ex-Art. 17

In 2019 the 4th Report ex-Art. 17 on the conservation status (CS) of Annex I Habitats of the 92/43/EEC Directive was expected by every EU/28 country, with reference to the period 2013-18. In Italy, the process was in charge to the Italian Institute for Environmental Protection and Research (ISPRA), on behalf of the Ministry for Environment, Land and Sea Protection (MATTM), with the scientific support of the Italian Botanical Society (SBI). A large group of thematic and territorial experts elaborated the available data concerning the 124 types of terrestrial and inland water Habitats present in Italy, 39 of which are represented by Forest Habitats (Group 9),. The main aim of the work was the evaluation of the overall CS of each Habitat by Biogeographic Region (Mediterranean, Continental and Alpine), for a total amount of 294 assessments. A high proportion of these (92, corresponding to 31% of the total) referred to Forest Habitats, including 20 marginal types for which the CS was not requested. The analysis was carried out at different scales: a) administrative territory, through the data contained in the ISPRA database, whose compilation was in charge to the Regions and Autonomous Provinces; b) Natura 2000 site, with the latest updates available (Standard Data Forms updated to 2018); c) national scale, implementing the distribution maps for each Habitat based on the European grid ETRS89-LAEA5210 (10x10 km2 mesh); d) Biogeographic Region, scale of the final assessment. Cartographic outcomes, associated databases and additional data used for the assessments will be available online on the ISPRA Portal as soon as the validation process by the European Commission will be completed. A dedicated archive named "HAB_IT" has been created in the national database "VegItaly" (1), managed by the Italian Society of Vegetation Science, where the phytosociological relevés representative of the various Annex I Habitats in Italy will be archived and freely accessible. An overview of the results regarding the Forest habitats is here provided, including a comparison with the outcomes of the former reporting cycle, the 3rd Report ex-Art. 17 (2). In several cases (e.g. 9120, 91L0), the distribution maps have been remarkably improved due to better knowledge and more fitful interpretation. The conservation status resulted as Favourable (FV) for 6,7%, Inadequate (U1) for 58,7% and Bad (U1) for 32,0% of the 72 assessed forest Habitat types. In no case there was an improvement of the conservation status, while in 6 cases a worsening of the conditions resulted from the data analysis, pointing out the Habitats types with a higher need of action. Similarly to other projects carried out as a team by the network of Annex I Habitat experts of the Italian Botanical Society and the Italian Society for Vegetation Science (e.g. 3, 4), this is another step in the direction of supporting the implementation of the 92/43/EEC "Habitat" Directive in Italy and Europe. On this ground, the high biodiversity of the Italian forest Habitats could be emphasized, however results pointed out that some rare or endemic types (e.g. Alnus cordata or Betula aetnensis-dominated forests) are still scarcely acknowledged by the most prominent EU conservation tools such as the Annex I to the "Habitat" Directive. 1) F. Landucci et al. (2012) Plant Biosyst., 146(4), 756-763 2) P. Genovesi et al. (2014) ISPRA, Serie Rapporti, 194/2014 3) E. Biondi et al. (2009) Società Botanica Italiana, MATTM, D.P.N., http://vnr.unipg.it/habitat/ 4) D. Gigante et al. (2016) Plant Sociology, 53(2), 77-8

Search for dark matter produced in association with bottom or top quarks in √s = 13 TeV pp collisions with the ATLAS detector

A search for weakly interacting massive particle dark matter produced in association with bottom or top quarks is presented. Final states containing third-generation quarks and miss- ing transverse momentum are considered. The analysis uses 36.1 fb−1 of proton–proton collision data recorded by the ATLAS experiment at √s = 13 TeV in 2015 and 2016. No significant excess of events above the estimated backgrounds is observed. The results are in- terpreted in the framework of simplified models of spin-0 dark-matter mediators. For colour- neutral spin-0 mediators produced in association with top quarks and decaying into a pair of dark-matter particles, mediator masses below 50 GeV are excluded assuming a dark-matter candidate mass of 1 GeV and unitary couplings. For scalar and pseudoscalar mediators produced in association with bottom quarks, the search sets limits on the production cross- section of 300 times the predicted rate for mediators with masses between 10 and 50 GeV and assuming a dark-matter mass of 1 GeV and unitary coupling. Constraints on colour- charged scalar simplified models are also presented. Assuming a dark-matter particle mass of 35 GeV, mediator particles with mass below 1.1 TeV are excluded for couplings yielding a dark-matter relic density consistent with measurements

Measurement of the CP-violating phase ϕs and the Bs0 meson decay width difference with Bs0 → J/ψϕ decays in ATLAS

A measurement of the Bs0 decay parameters in the Bs0 → J/ψϕ channel using an integrated luminosity of 14.3 fb−1 collected by the ATLAS detector from 8 TeV pp collisions at the LHC is presented. The measured parameters include the CP -violating phase ϕs, the decay width Γs and the width difference between the mass eigenstates ΔΓs. The values measured for the physical parameters are statistically combined with those from 4.9 fb−1 of 7 TeV data, leading to the following: ϕ s =−0.090±0.078(stat.)±0.041(syst.)rad ΔΓ s =0.085±0.011(stat.)±0.007(syst.)ps −1 Γ s =0.675±0.003(stat.)±0.003(syst.)ps −1 In the analysis the parameter ΔΓs is constrained to be positive. Results for ϕs and ΔΓs are also presented as 68% and 95% likelihood contours in the ϕs-ΔΓs plane. Also measured in this decay channel are the transversity amplitudes and corresponding strong phases. All measurements are in agreement with the Standard Model predictions

Search for massive, long-lived particles using multitrack displaced vertices or displaced lepton pairs in pp collisions at √s = 8 TeV with the ATLAS detector

Many extensions of the Standard Model posit the existence of heavy particles with long lifetimes. This article presents the results of a search for events containing at least one long-lived particle that decays at a significant distance from its production point into two leptons or into five or more charged particles. This analysis uses a data sample of proton-proton collisions at √s=8  TeV corresponding to an integrated luminosity of 20.3  fb−1 collected in 2012 by the ATLAS detector operating at the Large Hadron Collider. No events are observed in any of the signal regions, and limits are set on model parameters within supersymmetric scenarios involving R-parity violation, split supersymmetry, and gauge mediation. In some of the search channels, the trigger and search strategy are based only on the decay products of individual long-lived particles, irrespective of the rest of the event. In these cases, the provided limits can easily be reinterpreted in different scenarios

Measurement of the production cross-section of a single top quark in association with a W boson at 8 TeV with the ATLAS experiment

The cross-section for the production of a single top quark in association with a W boson in proton-proton collisions at s√=8TeV is measured. The dataset corresponds to an integrated luminosity of 20.3 fb−1, collected by the ATLAS detector in 2012 at the Large Hadron Collider at CERN. Events containing two leptons and one central b-jet are selected. The W t signal is separated from the backgrounds using boosted decision trees, each of which combines a number of discriminating variables into one classifier. Production of W t events is observed with a significance of 7.7σ. The cross-section is extracted in a profile likelihood fit to the classifier output distributions. The W t cross-section, inclusive of decay modes, is measured to be 23.0 ± 1.3(stat.)− 3.5+ 3.2(syst.)±1.1(lumi.) pb. The measured cross-section is used to extract a value for the CKM matrix element |Vtb| of 1.01 ± 0.10 and a lower limit of 0.80 at the 95% confidence level. The cross-section for the production of a top quark and a W boson is also measured in a fiducial acceptance requiring two leptons with pT> 25 GeV and |η| 20 GeV and |η|  20 GeV, including both W t and top-quark pair events as signal. The measured value of the fiducial cross-section is 0.85 ± 0.01(stat.)− 0.07+ 0.07(syst.)±0.03(lumi.) pb

Measurement of the differential cross-section of highly boosted top quarks as a function of their transverse momentum in s =8 TeV proton-proton collisions using the ATLAS detector

The differential cross-section for pair production of top quarks with high transverse momentum is measured in 20.3  fb−1 of proton-proton collisions at a center-of-mass energy of 8 TeV. The measurement is performed for tt¯ events in the lepton+jets channel. The cross-section is reported as a function of the hadronically decaying top quark transverse momentum for values above 300 GeV. The hadronically decaying top quark is reconstructed as an anti-kt jet with radius parameter R=1.0 and identified with jet substructure techniques. The observed yield is corrected for detector effects to obtain a cross-section at particle level in a fiducial region close to the event selection. A parton-level cross-section extrapolated to the full phase space is also reported for top quarks with transverse momentum above 300 GeV. The predictions of a majority of next-to-leading-order and leading-order matrix-element Monte Carlo generators are found to agree with the measured cross-sections.- We thank CERN for the very successful operation of the LHC, as well as the support staff from our institutions without whom ATLAS could not be operated efficiently. We acknowledge the support of ANPCyT, Argentina; YerPhI, Armenia; ARC, Australia; BMWFW and FWF, Austria; ANAS, Azerbaijan; SSTC, Belarus; CNPq and FAPESP, Brazil; NSERC, NRC and CFI, Canada; CERN; CONICYT, Chile; CAS, MOST and NSFC, China; COLCIENCIAS, Colombia; MSMT CR, MPO CR and VSC CR, Czech Republic; DNRF, DNSRC and Lundbeck Foundation, Denmark; IN2P3-CNRS, CEA-DSM/IRFU, France; GNSF, Georgia; BMBF, HGF, and MPG, Germany; GSRT, Greece; RGC, Hong Kong SAR, China; ISF, I-CORE and Benoziyo Center, Israel; INFN, Italy; MEXT and JSPS, Japan; CNRST, Morocco; FOM and NWO, Netherlands; RCN, Norway; MNiSW and NCN, Poland; FCT, Portugal; MNE/IFA, Romania; MES of Russia and NRC KI, Russian Federation; JINR; MESTD, Serbia; MSSR, Slovakia; ARRS and MIZS, Slovenia; DST/NRF, South Africa; MINECO, Spain; SRC and Wallenberg Foundation, Sweden; SERI, SNSF and Cantons of Bern and Geneva, Switzerland; MOST, Taiwan; TAEK, Turkey; STFC, United Kingdom; DOE and NSF, United States of America. In addition, individual groups and members have received support from BCKDF, the Canada Council, CANARIE, CRC, Compute Canada, FQRNT, and the Ontario Innovation Trust, Canada; EPLANET, ERC, FP7, Horizon 2020 and Marie Sklodowska-Curie Actions, European Union; Investissements d'Avenir Labex and Idex, ANR, Region Auvergne and Fondation Partager le Savoir, France; DFG and AvH Foundation, Germany; Herakleitos, Thales and Aristeia programmes co-financed by EU-ESF and the Greek NSRF; BSF, GIF and Minerva, Israel; BRF, Norway; the Royal Society and Leverhulme Trust, United Kingdom. The crucial computing support from all WLCG partners is acknowledged gratefully, in particular from CERN and the ATLAS Tier-1 facilities at TRIUMF (Canada), NDGF (Denmark, Norway, Sweden), CC-IN2P3 (France), KIT/GridKA (Germany), INFN-CNAF (Italy), NL-T1 (Netherlands), PIC (Spain), ASGC (Taiwan), RAL (UK) an

Measurement of the total cross section from elastic scattering in pp collisions at s√ = 7 TeV with the ATLAS detector

A measurement of the total pp cross section at the LHC at √s = 7 TeV is presented. In a special run with high-β beam optics, an integrated luminosity of 80 µb−1 was accumulated in order to measure the differential elastic cross section as a function of the Mandelstam momentum transfer variable t. The measurement is performed with the ALFA sub-detector of ATLAS. Using a fit to the differential elastic cross section in the |t| range from 0.01 GeV2 to 0.1 GeV2 to extrapolate to |t| → 0, the total cross section, σtot(pp → X), is measured via the optical theorem to be: σtot(pp → X) = 95.35 ± 0.38 (stat.) ± 1.25 (exp.) ± 0.37 (extr.) mb, where the first error is statistical, the second accounts for all experimental systematic uncertainties and the\ud last is related to uncertainties in the extrapolation to |t| → 0. In addition, the slope of the elastic cross section at small |t| is determined to be B = 19.73 ± 0.14 (stat.) ± 0.26 (syst.) GeV−2

Search for the b¯b decay of the Standard Model Higgs boson in associated (W/Z)H production with the ATLAS detector

A search for the bb¯ decay of the Standard Model Higgs boson is performed with the ATLAS experiment using the full dataset recorded at the LHC in Run 1. The integrated luminosities used are 4.7 and 20.3 fb−1 from pp collisions at s√=7 and 8 TeV, respectively. The processes considered are associated (W/Z)H production, where W → eν/μν, Z → ee/μμ and Z → νν. The observed (expected) deviation from the background-only hypothesis corresponds to a significance of 1.4 (2.6) standard deviations and the ratio of the measured signal yield to the Standard Model expectation is found to be μ = 0.52 ± 0.32 (stat.) ± 0.24 (syst.) for a Higgs boson mass of 125.36 GeV. The analysis procedure is validated by a measurement of the yield of (W/Z)Z production with Z→bb¯ in the same final states as for the Higgs boson search, from which the ratio of the observed signal yield to the Standard Model expectation is found to be 0.74 ± 0.09 (stat.) ± 0.14 (syst.)