1,382 research outputs found
Simulation of an 1857-like Mw 7.9 San Andreas Fault Earthquake and the Response of Tall Steel Moment Frame Buildings in Southern California – A Prototype Study
In 1857, an earthquake of magnitude 7.9 occurred on the San Andreas fault, starting at Parkfield and rupturing
in a southeasterly direction for more than 360 km. Such a unilateral rupture produces significant directivity
toward the San Fernando and Los Angeles basins. The strong shaking in the basins due to this earthquake
would have had significant long-period content (2-8 s), and the objective of this study is to quantify the impact
of such an earthquake on two 18-story steel moment frame building models, hypothetically located at 636 sites
on a 3.5 km grid in southern California. End-to-end simulations include modeling the source and rupture of a
fault at one end, numerically propagating the seismic waves through the earth structure, simulating the damage
to engineered structures and estimating the economic impact at the other end using high-performance computing.
In this prototype study, we use an inferred finite source model of the magnitude 7.9, 2002 Denali fault
earthquake in Alaska, and map it onto the San Andreas fault with the rupture originating at Parkfield and
propagating southward over a distance of 290 km. Using the spectral element seismic wave propagation code,
SPECFEM3D, we simulate an 1857-like earthquake on the San Andreas fault and compute ground motions at
the 636 analysis sites. Using the nonlinear structural analysis program, FRAME3D, we subsequently analyze
3-D structural models of an existing tall steel building designed using the 1982 Uniform Building Code (UBC),
as well as one designed according to the 1997 UBC, subjected to the computed ground motion at each of these
sites. We summarize the performance of these structural models on contour maps of peak interstory drift.
We then perform an economic loss analysis for the two buildings at each site, using the Matlab Damage and
Loss Analysis (MDLA) toolbox developed to implement the PEER loss-estimation methodology. The toolbox
includes damage prediction and repair cost estimation for structural and non-structural components and allows
for the computation of the mean and variance of building repair costs conditional on engineering demand
parameters (i.e. inter-story drift ratios and peak floor accelerations). Here, we modify it to treat steel-frame
high-rises, including aspects such as mechanical, electrical and plumbing systems, traction elevators, and the
possibility of irreparable structural damage. We then generate contour plots of conditional mean losses for the
San Fernando and the Los Angeles basins for the pre-Northridge and modern code-designed buildings, allowing
for comparison of the economic effects of the updated code for the scenario event. In principle, by simulating
multiple seismic events, consistent with the probabilistic seismic hazard for a building site, the same basic
approach could be used to quantify the uncertain losses from future earthquakes
Hard x-ray photon-in-photon-out spectroscopy with lifetime resolution – of XAS, XES, RIXSS and HERFD
Spectroscopic techniques that aim to resolve the electronic configuration and local coordination of a central
atom by detecting inner-shell radiative decays following photoexcitation using hard X-rays are presented. The
experimental setup requires an X-ray spectrometer based on perfect crystal Bragg optics. The possibilities arising from
non-resonant (X-Ray Emission Spectroscopy - XES) and resonant excitation (Resonant Inelastic X-Ray Scattering
Spectroscopy – RIXSS, High-Energy-Resolution Fluorescence Detected (HERFD) XAS) are discussed when the
instrumental energy broadenings of the primary (beamline) monochromator and the crystal spectrometer for x-ray
emission detection are on the order of the core hole lifetimes of the intermediate and final electronic states. The small
energy bandwidth in the emission detection yields line-sharpened absorption features. In transition metal compounds,
electron-electron interactions as well as orbital splittings and fractional population can be revealed. Combination with
EXAFS spectroscopy enables to extent the k-range beyond unwanted absorption edges in the sample that limit the
EXAFS range in conventional absorption spectroscopy
Recommended from our members
Forward and inverse modelling of post-seismic deformation
We consider a new approach to both the forward and inverse problems in post-seismic deformation. We present a method for forward modelling post-seismic deformation in a self-gravitating, heterogeneous and compressible earth with a variety of linear and nonlinear rheologies. We further demonstrate how the adjoint method can be applied to the inverse problem both to invert for rheological structure and to calculate the sensitivity of a given surface measurement to changes in rheology or time-dependence of the source. Both the forward and inverse aspects are illustrated with several numerical examples implemented in a spherically symmetric earth model.Natural Environment Research Council, British Antarctic Surve
Decoupling Graphene from SiC(0001) via Oxidation
When epitaxial graphene layers are formed on SiC(0001), the first carbon
layer (known as the "buffer layer"), while relatively easy to synthesize, does
not have the desirable electrical properties of graphene. The conductivity is
poor due to a disruption of the graphene pi-bands by covalent bonding to the
SiC substrate. Here we show that it is possible to restore the graphene
pi-bands by inserting a thin oxide layer between the buffer layer and SiC
substrate using a low temperature, CMOS-compatible process that does not damage
the graphene layer
Recommended from our members
Anelasticity across seismic to tidal timescales: a self-consistent approach
In a pioneering study, Wahr & Bergen developed the widely adopted, pseudo-normal mode framework for predicting the impact of anelastic effects on the Earth's body tides. Lau have recently derived an extended normal mode treatment of the problem (as well as a minor variant of the theory known as the direct solution method) that makes full use of theoretical developments in free oscillation seismology spanning the last quarter century and that avoids a series of assumptions and approximations adopted in the traditional theory for predicting anelastic effects. There are two noteworthy differences between these two theories: (1) the traditional theory only considers perturbations to the eigenmodes of an elastic Earth, whereas the new theory augments this set of modes to include the relaxation modes that arise in anelastic behaviour; and (2) the traditional theory approximates the complex perturbation to the tidal Love number as a scaled version of the complex perturbation to the elastic moduli, whereas the new theory computes the full complex perturbation to each eigenmode. In this study, we highlight the above differences using a series of synthetic calculations, and demonstrate that the traditional theory can introduce significant error in predictions of the complex perturbation to the Love numbers due to anelasticity and the related predictions of tidal lag angles. For the simplified Earth models we adopt, the computed lag angles differ by ∼20 per cent. The assumptions in the traditional theory have important implications for previous studies that use model predictions to correct observables for body tide signals or that analyse observations of body tide deformation to infer mantle anelastic structure. Finally, we also highlight the fundamental difference between apparent attenuation (i.e. attenuation inferred from observations or predicted using the above theories) and intrinsic attenuation (i.e. the material property investigated through experiments), where both are often expressed in terms of lag angles or . In particular, we demonstrate the potentially significant (factor of two or more) bias introduced in estimates of and its frequency dependence in studies that have treated determined from tidal phase lags or measured experimentally as being equal. The observed or theoretically predicted lag angle (or apparent ) differs from the intrinsic, material property due to inertia, self-gravity and effects associated with the energy budget. By accounting for these differences we derive, for a special case, an expression that accurately maps apparent attenuation predicted using the extended normal mode formalism of Lau into intrinsic attenuation. The theory allows for more generalized mappings which may be used to robustly connect observations and predictions of tidal lag angles to results from laboratory experiments of mantle materials.This work was supported by NSF EAR-1464024, NSF EAR-1215061, and Harvard University
A risk profile for identifying community-dwelling elderly with a highrisk of recurrent falling: results of a 3-year prospective study
Introduction: The aim of the prospective study reported here was to develop a risk profile that can be used to identify community-dwelling elderly at a high risk of recurrent falling. Materials and methods: The study was designed as a 3-year prospective cohort study. A total of 1365 community-dwelling persons, aged 65 years and older, of the population-based Longitudinal Aging Study Amsterdam participated in the study. During an interview in 1995/1996, physical, cognitive, emotional and social aspects of functioning were assessed. A follow-up on the number of falls and fractures was conducted during a 3-year period using fall calendars that participants filled out weekly. Recurrent fallers were identified as those who fell at least twice within a 6-month period during the 3-year follow-up. Results: The incidence of recurrent falls at the 3-year follow-up point was 24.9% in women and 24.4% in men. Of the respondents, 5.5% reported a total of 87 fractures that resulted from a fall, including 20 hip fractures, 21 wrist fractures and seven humerus fractures. Recurrent fallers were more prone to have a fall-related fracture than those who were not defined as recurrent fallers (11.9% vs. 3.4%; OR: 3.8; 95% CI: 2.3-6.1). Backward logistic regression analysis identified the following predictors in the risk profile for recurrent falling: two or more previous falls, dizziness, functional limitations, weak grip strength, low body weight, fear of falling, the presence of dogs/cats in the household, a high educational level, drinking 18 or more alcoholic consumptions per week and two interaction terms (high educationx18 or more alcohol consumptions per week and two or more previous falls x fear of falling) (AUC=0.71). Discussion: At a cut-off point of 5 on the total risk score (range 0-30), the model predicted recurrent falling with a sensitivity of 59% and a specificity of 71%. At a cut-off point of 10, the sensitivity and specificity were 31% and 92%, respectively. A risk profile including nine predictors that can easily be assessed seems to be a useful tool for the identification of community-dwelling elderly with a high risk of recurrent falling. © International Osteoporosis Foundation and National Osteoporosis Foundation 2006
- …