Feature weighting techniques for CBR in software effort estimation studies: A review and empirical evaluation

Context : Software effort estimation is one of the most important activities in the software development process. Unfortunately, estimates are often substantially wrong. Numerous estimation methods have been proposed including Case-based Reasoning (CBR). In order to improve CBR estimation accuracy, many researchers have proposed feature weighting techniques (FWT). Objective: Our purpose is to systematically review the empirical evidence to determine whether FWT leads to improved predictions. In addition we evaluate these techniques from the perspectives of (i) approach (ii) strengths and weaknesses (iii) performance and (iv) experimental evaluation approach including the data sets used. Method: We conducted a systematic literature review of published, refereed primary studies on FWT (2000-2014). Results: We identified 19 relevant primary studies. These reported a range of different techniques. 17 out of 19 make benchmark comparisons with standard CBR and 16 out of 17 studies report improved accuracy. Using a one-sample sign test this positive impact is significant (p = 0:0003). Conclusion: The actionable conclusion from this study is that our review of all relevant empirical evidence supports the use of FWTs and we recommend that researchers and practitioners give serious consideration to their adoption

Dynamic Modes of Microcapsules in Steady Shear Flow: Effects of Bending and Shear Elasticities

The dynamics of microcapsules in steady shear flow was studied using a theoretical approach based on three variables: The Taylor deformation parameter $\alpha_{\rm D}$, the inclination angle $\theta$, and the phase angle $\phi$ of the membrane rotation. It is found that the dynamic phase diagram shows a remarkable change with an increase in the ratio of the membrane shear and bending elasticities. A fluid vesicle (no shear elasticity) exhibits three dynamic modes: (i) Tank-treading (TT) at low viscosity $\eta_{\rm {in}}$ of internal fluid ($\alpha_{\rm D}$ and $\theta$ relaxes to constant values), (ii) Tumbling (TB) at high $\eta_{\rm {in}}$ ($\theta$ rotates), and (iii) Swinging (SW) at middle $\eta_{\rm {in}}$ and high shear rate $\dot\gamma$ ($\theta$ oscillates). All of three modes are accompanied by a membrane ($\phi$) rotation. For microcapsules with low shear elasticity, the TB phase with no $\phi$ rotation and the coexistence phase of SW and TB motions are induced by the energy barrier of $\phi$ rotation. Synchronization of $\phi$ rotation with TB rotation or SW oscillation occurs with integer ratios of rotational frequencies. At high shear elasticity, where a saddle point in the energy potential disappears, intermediate phases vanish, and either $\phi$ or $\theta$ rotation occurs. This phase behavior agrees with recent simulation results of microcapsules with low bending elasticity.Comment: 11 pages, 14 figure

Efficient and accurate simulations of deformable particles immersed in a fluid using a combined immersed boundary lattice Boltzmann finite element method

The deformation of an initially spherical capsule, freely suspended in simple shear flow, can be computed analytically in the limit of small deformations [D. Barthes-Biesel, J. M. Rallison, The Time-Dependent Deformation of a Capsule Freely Suspended in a Linear Shear Flow, J. Fluid Mech. 113 (1981) 251-267]. Those analytic approximations are used to study the influence of the mesh tessellation method, the spatial resolution, and the discrete delta function of the immersed boundary method on the numerical results obtained by a coupled immersed boundary lattice Boltzmann finite element method. For the description of the capsule membrane, a finite element method and the Skalak constitutive model [R. Skalak et al., Strain Energy Function of Red Blood Cell Membranes, Biophys. J. 13 (1973) 245-264] have been employed. Our primary goal is the investigation of the presented model for small resolutions to provide a sound basis for efficient but accurate simulations of multiple deformable particles immersed in a fluid. We come to the conclusion that details of the membrane mesh, as tessellation method and resolution, play only a minor role. The hydrodynamic resolution, i.e., the width of the discrete delta function, can significantly influence the accuracy of the simulations. The discretization of the delta function introduces an artificial length scale, which effectively changes the radius and the deformability of the capsule. We discuss possibilities of reducing the computing time of simulations of deformable objects immersed in a fluid while maintaining high accuracy.Comment: 23 pages, 14 figures, 3 table

The In Vivo Wear Resistance of 12 Composite Resins

: The in vivo wear resistance of 12 composite resins were compared with an amalgam control using the Latin Square experimental design. Sixteen edentulous patients wearing specially designed complete dentures formed the experimental population. Materials and Methods : The Michigan Computer Graphics Measurement System was used to digitize the surface of the control and composite resin samples before and after 3-month test periods to obtain wear data. The 12 composite resins selected for this investigation based on their published composite classification types were seven fine particle composites, three blends, and two microfilled composite resins. The Latin Square experimental design was found to be valid with the factor of material being statistically different at the 5% level of significance. Wear was computed as volume loss (mm 3 /mm 2 ), and all of the composites studied had more wear than the amalgam control ( P = .001). Results : After 3 months, the mean (error) of wear of the amalgam was 0.028 (0.006). Means (error) of wear for the 12 composites were ranked from most to least wear by mean wear volume loss. Conclusions : The absence of any relationship between mean wear volume loss and the volume percentage filler was confirmed by the correlation coefficient r = -0.158.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/72960/1/j.1532-849X.1992.tb00419.x.pd

Dynamics of Fluid Vesicles in Oscillatory Shear Flow

The dynamics of fluid vesicles in oscillatory shear flow was studied using differential equations of two variables: the Taylor deformation parameter and inclination angle $\theta$. In a steady shear flow with a low viscosity $\eta_{\rm {in}}$ of internal fluid, the vesicles exhibit steady tank-treading motion with a constant inclination angle $\theta_0$. In the oscillatory flow with a low shear frequency, $\theta$ oscillates between $\pm \theta_0$ or around $\theta_0$ for zero or finite mean shear rate $\dot\gamma_{\rm m}$, respectively. As shear frequency $f_{\gamma}$ increases, the vesicle oscillation becomes delayed with respect to the shear oscillation, and the oscillation amplitude decreases. At high $f_{\gamma}$ with $\dot\gamma_{\rm m}=0$, another limit-cycle oscillation between $\theta_0-\pi$ and $-\theta_0$ is found to appear. In the steady flow, $\theta$ periodically rotates (tumbling) at high $\eta_{\rm {in}}$, and $\theta$ and the vesicle shape oscillate (swinging) at middle $\eta_{\rm {in}}$ and high shear rate. In the oscillatory flow, the coexistence of two or more limit-cycle oscillations can occur for low $f_{\gamma}$ in these phases. For the vesicle with a fixed shape, the angle $\theta$ rotates back to the original position after an oscillation period. However, it is found that a preferred angle can be induced by small thermal fluctuations.Comment: 11 pages, 13 figure

Multi-Particle Collision Dynamics -- a Particle-Based Mesoscale Simulation Approach to the Hydrodynamics of Complex Fluids

In this review, we describe and analyze a mesoscale simulation method for fluid flow, which was introduced by Malevanets and Kapral in 1999, and is now called multi-particle collision dynamics (MPC) or stochastic rotation dynamics (SRD). The method consists of alternating streaming and collision steps in an ensemble of point particles. The multi-particle collisions are performed by grouping particles in collision cells, and mass, momentum, and energy are locally conserved. This simulation technique captures both full hydrodynamic interactions and thermal fluctuations. The first part of the review begins with a description of several widely used MPC algorithms and then discusses important features of the original SRD algorithm and frequently used variations. Two complementary approaches for deriving the hydrodynamic equations and evaluating the transport coefficients are reviewed. It is then shown how MPC algorithms can be generalized to model non-ideal fluids, and binary mixtures with a consolute point. The importance of angular-momentum conservation for systems like phase-separated liquids with different viscosities is discussed. The second part of the review describes a number of recent applications of MPC algorithms to study colloid and polymer dynamics, the behavior of vesicles and cells in hydrodynamic flows, and the dynamics of viscoelastic fluids

A cartilage growth mixture model for infinitesimal strains: solutions of boundary-value problems related to in vitro growth experiments

A cartilage growth mixture (CGM) model is linearized for infinitesimal elastic and growth strains. Parametric studies for equilibrium and nonequilibrium boundary-value problems representing the in vitro growth of cylindrical cartilage constructs are solved. The results show that the CGM model is capable of describing the main biomechanical features of cartilage growth. The solutions to the equilibrium problems reveal that tissue composition, constituent pre-stresses, and geometry depend on collagen remodeling activity, growth symmetry, and differential growth. Also, nonhomogeneous growth leads to nonhomogeneous tissue composition and constituent pre-stresses. The solution to the nonequilibrium problem reveals that the tissue is nearly in equilibrium at all time points. The results suggest that the CGM model may be used in the design of tissue engineered cartilage constructs for the repair of cartilage defects; for example, to predict how dynamic mechanical loading affects the development of nonuniform properties during in vitro growth. Furthermore, the results lay the foundation for future analyses with nonlinear models that are needed to develop realistic models of cartilage growth

Effect of tube diameter and capillary number on platelet margination and near-wall dynamics

The effect of tube diameter $D$ and capillary number $Ca$ on platelet margination in blood flow at $\approx 37\%$ tube haematocrit is investigated. The system is modelled as three-dimensional suspension of deformable red blood cells and nearly rigid platelets using a combination of the lattice-Boltzmann, immersed boundary and finite element methods. Results show that margination is facilitated by a non-diffusive radial platelet transport. This effect is important near the edge of the cell-free layer, but it is only observed for $Ca > 0.2$, when red blood cells are tank-treading rather than tumbling. It is also shown that platelet trapping in the cell-free layer is reversible for $Ca \leq 0.2$. Only for the smallest investigated tube ($D = 10 \mu\text{m}$) margination is essentially independent of $Ca$. Once platelets have reached the cell-free layer, they tend to slide rather than tumble. The tumbling rate is essentially independent of $Ca$ but increases with $D$. Tumbling is suppressed by the strong confinement due to the relatively small cell-free layer thickness at $\approx 37\%$ tube haematocrit.Comment: 16 pages, 10 figure