237 research outputs found
Erosional effects on runout of fast landslides, debris flows and avalanches: A numerical investigation
The mechanism of mass changes in debris transportation process is an important topic in the study of fast landslides, debris flows and avalanches. Basal erosion is recognised as a dynamic interaction between the original moving material and the entrained basal topsoil shearing along their non-slip contact surface. In this paper we propose a new concept of yield rate and establish the erosional relationship to bridge these two systems. A pertinent mathematical model and numerical implementation are formulated. Parametric numerical experiments are conducted to compare the erosional effects. The simulated results are consistent with available experimental and field observations. The influence of the involvement of the erosive material on runout behaviour and the global mobility of the moving material are elucidated. The proposed method is then employed to analyse a recent debris flow event in northern Italy. The excellent match to the field data gives it a plausible potential application to the analysis of this type of gravity-driven flow with significant erosion. Defined in a dimensionless form, the proposed yield rate can be estimated conveniently in general geotechnical practices.published_or_final_versio
Coupled distinct element method computational fluid dynamics analyses for reservoir landslide modelling
The Vajont landslide involved a large mass of rock splashing at high speed into the reservoir which in turn generated a highimpulse water that overtopped the dam and swept away the downstream village. In several cases of reservoir landslide, albeit the flood defence structures may remain intact, a catastrophe still occur due to the generation of a ‚tsunami‘ wave. Since the features of the tsunami wave strongly depend on the physics of the rock splashing and the subsequent rock –water interaction, a numerical tool accounting for such physics is required for predictions to be reliable. Here, the formulation of a coupled 3D Distinct Element Method (DEM) – Computational Fluid Dynamics (CFD) code used to simulate the rock slide from onset to impact with the reservoir and the subsequent generation of the impulse wave, is presented. To run realistic simulations in an affordable runtime, coarse graining is employed. The main results of quasi 3D analyses in plane strain along two cross-sections representative of the eastern and western slope sectors are presented. The results show to be in broad agreement with the available recorded observations
Recommended from our members
On the dynamic fragmentation and lubrication of coseismic landslides
The three-dimensional discrete element method (DEM) has been employed to analyze the dynamic fragmentation and lubrication mechanisms of coseismic Tangjiashan landslide induced by the 2008 Ms 8.0 Wenchuan earthquake. The numerical results show that the internal rock damage occurs and propagates gradually along the basal failure plane due to seismic shaking. At peak ground displacement, a sudden increase of tensile and shear stresses can lead to the complete breakage of basal bonds. This is associated with a sudden relief of overburden stress and rapid decrease of basal stress ratio. Thus, the slope fails as a whole and moves quickly downslope. In this process, several large transversal cracks develop at the middle and upper rear regions, disintegrating the slope into several large blocks. During landslide propagation, the
thickness of basal fragmented layer increases progressively due to intense shearing, and the basal stress ratio reduces accordingly from 0.68 to 0.28. The reduction of landslide basal stress ratio occurs when the strong basal resistance is overcome by seismic and gravity induced shear forces together with intense particle rearrangements. It can be quantified by vibrational and rotational granular temperatures of the basal shear layer, with the peak values of 35.2 m2 /s2 and 11.6 m2 /s2, respectively. The widespread internal slope fragmentation and subsequent lubrication have been identified as the key mechanisms governing landslide motion, which appear to be the intrinsic features of landslide irrespective of its triggering mechanism. The earthquake shaking is more relevant to the detachment than to the spreading of landslide mass.National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities
and RockHoriZon advanced tools for rockfall hazard and risk zonation at the regional scal
Recommended from our members
Influence of Inter-Particle Friction and Damping on the Dynamics of Spherical Projectile Impacting Onto a Soil Bed
This study investigates the dynamics of a spherical projectile impact onto a granular bed via numerical simulations by discrete element method (DEM). The granular bed is modeled as an assembly of polydisperse spherical particles and the projectile is represented by a rigid sphere. The DEM model is used to investigate the cratering process, including the dynamics of the projectile and energy transformation and dissipation. The cratering process is illustrated by tracking the motion of the projectile and granular particles in the bed. The numerical results show that the dynamics of the projectile follows the generalized Poncelet law that the final penetration depth is a power-law function of the falling height. The numerical results can match well the experimental data reported in the literature, demonstrating the reliability of the DEM model in analyzing the impact of a spherical projectile on a granular bed. Further analyses illustrate that the impact process consists of three main stages, namely the impact, penetration and collapse, as characterized by the evolution of projective velocity, strong force chains and crater shape. The initial kinetic and potential energy of the projectile is dissipated mainly by inter-particle friction which governs the projectile dynamics. The stopping time of projectile decreases as the initial impact velocity increases. The final penetration depth scales as one-third the power of total falling height and is inversely proportional to the macroscopic granular friction coefficient.National Natural Science Foundation of China (No.
42107155), the Royal Society, Sino-British Fellowship Trust
International Exchanges Award (No. IES\R2\202023), the
Fundamental Research Funds for the Central Universities
(No. 2682021CX061), the National Key R&D Program of
China (No. 2017YFC1502500
Dynamic Fragmentation of Jointed Rock Blocks During Rockslide-Avalanches: Insights From Discrete Element Analyses
The dynamic fragmentation of jointed rock blocks during rockslide avalanches has been
investigated by discrete element method simulations for a multiple arrangement of a rock block sliding
over a simple slope geometry. The rock blocks are released along an inclined sliding plane and subsequently
collide onto a flat horizontal plane at a sharp kink point. The contact force chains generated by the impact
appear initially at the bottom frontal corner of the rock block and then propagate radially upward to the top
rear part of the block. The jointed rock blocks exhibit evident contact force concentration and discontinuity of
force wave propagation near the joint, associating with high energy dissipation of granular dynamics. The
corresponding force wave propagation velocity can be less than 200 m/s, which is much smaller than that of
an intact rock (1,316 m/s). The concentration of contact forces at the bottom leads to high rock fragmentation
intensity and momentum boosts, facilitating the spreading of many fine fragments to the distal ends.
However, the upper rock block exhibits very low rock fragmentation intensity but high energy dissipation
due to intensive friction and damping, resulting in the deposition of large fragments near the slope toe. The
size and shape of large fragments are closely related to the orientation and distribution of the block joints.
The cumulative fragment size distribution can be well fitted by the Weibull’s distribution function, with very
gentle and steep curvatures at the fine and coarse size ranges, respectively. The numerical results of fragment
size distribution can match well some experimental and field observations
Recommended from our members
Investigation of rock fragmentation during rockfalls and rock avalanches via 3-D discrete element analyses
This paper investigates the characteristics of dynamic rock fragmentation and its influence on the postfailure fragment trajectory. A series of numerical simulations by discrete element method (DEM) were performed for a simple rock block and slope geometry, where a particle agglomerate of prismatic shape is released along a sliding plane and subsequently collides onto a flat horizontal plane at a sharp kink point. The rock block is modeled as an assembly of bonded spherical particles with fragmentation arising from bond breakages. Bond strength and stiffness were calibrated against available experimental data. We analyzed how dynamic fragmentation occurs at impact, together with the generated fragment size distributions and consequently their runout for different slope topographies. It emerges that after impact, the vertical momentum of the granular system decreases sharply to nil, while the horizontal momentum increases suddenly and then decreases. The sudden boost of horizontal momentum can effectively facilitate the transport of fragments along the bottom floor. The rock fragmentation intensity is associated with the input energy and increases quickly with the slope angle. Gentle slopes normally lead to long spreading distance and large fragments, while steep slopes lead to high momentum boosts and impact forces, with efficient rock fragmentation and fine deposits. The fragment size decreases, while the fracture stress and fragment number both increase with the impact loading strain rate, supporting the experimental observations. The fragment size distributions can be well fitted by the Weibull's distribution function.Wile
Landscapes of Northern Lombardy: from the glacial scenery of Upper Valtellina to the prealpine lacustrine environment of Lake Como
In the region between Valtellina and Lake Como in the Central Italian Alps, one can visit, in a relatively small area, some of the best examples of mountain geomorphological landscapes of Italy. Eight specific sites-showing peculiar glacial, periglacial, structural, gravity-induced and erosional landforms-have been selected to illustrate how different landscapes may originate from geomorphological modelling of different lithotypes in different morphogenetic systems. These eight sites are exemplary cases in which significant evidence of past and current climatic and structural conditions characterising this region is exhibited
Recommended from our members
Discrete Element Analyses of a Realistic-shaped Rock Block Impacting Against a Soil Buffering Layer
The final authenticated version is available online at https://doi.org/10.1007/s00603-020-02116-0National Natural Science Foundation of China (grant 51779164, 41602289 and 41877260), the open funding of the State Key Laboratory of Hydraulics and Mountain River Engineering (Sichuan University) (No. Skhl1808) and the @RockHoriZon advanced tools for rockfall hazard and risk zonation at the regional scale (Grant 2016–0756), Fondazione CARIPLO
Recommended from our members
Slope erosion induced by surges of debris flow: insights from field experiments
Data availability: All data generated during the study are available from the corre- sponding author by request.Copyright © The Author(s) 2022. We conducted field observations and experiments to explore debris flow dynamics, sediment transportation and slope erosion at an active natural debris flow gully in the headwaters of Jiangjia Ravine (Dongchuan region, Southwest China). In this region, the hillslopes were heavily jointed, weathered and sparsely vegetated, providing continuous and rich sediment supplies for initiating debris flows. The debris flow propagated in the channel as a sequence of surges, with periodical changes of flow flux, velocity, water content, and viscosity as controlled mainly by the conditions of erodible sediments and water supplies from the upstream. The water content of bank sediments ranged from 5 to 8%, while it was 16 to 26% for debris surges in the channel. The particle size distribution of sediments on the alluvial fan followed the Weibull’s cumulative distribution and the mean size was in the range of 2 ~ 4 mm. The coarse particles were primarily elongated or prismoidal and aspect ratios followed well a normal distribution with the mean value of 0.4. The angular particles entrained in dense viscous debris flow surges could effectively abrade and groove the channel bed and banks, increasing the intensity of slope erosion. The incised slope had a sequence of terraced depositional layers on both banks. The layer thickness decreased as the erosion depth moved deeper into the stratum where hard bed soil/rock layers existed. The water-soil mixture of debris flow exhibited a clear shear-thinning behavior with its viscosity decreasing gradually with the increase of shear rate following the widely accepted power-law model. The dense viscous debris flow can facilitate the transportation of coarse gravels in channel and contribute to slope erosion.Royal Society, Sino-British Fellow- ship Trust International Exchanges Award (No. IES\R2\202023); open funding of the State Key Laboratory of Geomechanics and Geotechnical Engineering (No. Z019004)
- …