667 research outputs found
Tracing a relativistic Milky Way within the RAMOD measurement protocol
Advancement in astronomical observations and technical instrumentation
implies taking into account the general relativistic effects due the
gravitational fields encountered by the light while propagating from the star
to the observer. Therefore, data exploitation for Gaia-like space astrometric
mission (ESA, launch 2013) requires a fully relativistic interpretation of the
inverse ray-tracing problem, namely the development of a highly accurate
astrometric models in accordance with the geometrical environment affecting
light propagation itself and the precepts of the theory of measurement. This
could open a new rendition of the stellar distances and proper motions, or even
an alternative detection perspective of many subtle relativistic effects
suffered by light while it is propagating and subsequently recorded in the
physical measurements.Comment: Proceeding for "Relativity and Gravitation, 100 Years after Einstein
in Prague" to be published by Edition Open Access, revised versio
Micro-arcsecond light bending by Jupiter
The detectors designed for Gaia, the next ESA space astrometry mission to be
launched in 2011, will allow to observe repeatedly stars very close to
Jupiter's limb. This will open a unique opportunity to test General Relativity
by performing many Eddington-like experiments through the comparison between
the pattern of a starfield observed with or without Jupiter. We have derived
the main formulas relevant for the monopole and quadrupole light deflection by
an oblate planet and developed a simulator to investigate the processing of the
Gaia astrometric observation in the vicinity of the planet. The results show
that such an experiment carried out with the Gaia data will provide a new fully
independent determination of the PPN parameter gamma by means of differential
astrometric measurements and, more importantly, for the first time will
evidence the bending effect due to the quadrupole moment with a 3-sigma
confidence level. Given the accuracy of the experiment for the monopole
deflection, this will permit to test alternative modelling of the light bending
by moving masses.Comment: 22 pages, 16 figures. submitted to Class. Quantum Gra
A methodology for physically based rockfall hazard assessment
Rockfall hazard assessment is not simple to achieve in practice and sound, physically based assessment methodologies are still missing. The mobility of rockfalls implies a more difficult hazard definition with respect to other slope instabilities with minimal runout. Rockfall hazard assessment involves complex definitions for "occurrence probability" and "intensity". This paper is an attempt to evaluate rockfall hazard using the results of 3-D numerical modelling on a topography described by a DEM. Maps portraying the maximum frequency of passages, velocity and height of blocks at each model cell, are easily combined in a GIS in order to produce physically based rockfall hazard maps. Different methods are suggested and discussed for rockfall hazard mapping at a regional and local scale both along linear features or within exposed areas. An objective approach based on three-dimensional matrixes providing both a positional "Rockfall Hazard Index" and a "Rockfall Hazard Vector" is presented. The opportunity of combining different parameters in the 3-D matrixes has been evaluated to better express the relative increase in hazard. Furthermore, the sensitivity of the hazard index with respect to the included variables and their combinations is preliminarily discussed in order to constrain as objective as possible assessment criteria
Parametric evaluation of 3D dispersion of rockfall trajectories
International audienceThe capability of evaluating and managing rockfall related risks is largely based on numerical modelling. Nevertheless, the reliability and accuracy of rockfall models is greatly affected by the strong uncertainty and spatial variability which characterise all the relevant parameters. In particular, 3D effects related to the variability of slope geometry and micro-topography play a major role in controlling the dynamics of falling blocks. The most important 3D effect is the "lateral dispersion" of rockfall trajectories, largely affecting the way we model rockfall dynamics, design countermeasures and assess rockfall hazard. Nevertheless, the dependence of lateral dispersion on different controlling factors has been hardly ever systematically evaluated. In this paper, the influence of different controlling factors on the dispersion of rockfall trajectories has been systematically evaluated by performing 3D parametric modelling. Numerical simulations have been performed through a new software code able to use both a lumped mass and an hybrid (kinematic-dynamic) approach. Parametric modelling has been performed at different spatial resolutions using sets of biplanar simplified slopes characterised by different mean inclination and roughness. Model results outlined a complex dependence of lateral dispersion phenomena on slope mean gradient (macro-topography), slope roughness (micro-topography) and the spatial resolution of the model (model-dependent topography). Furthermore, the sensitivity of model results in terms of kinematic variables of motion (i.e. velocity and height to the ground) to the factors controlling lateral dispersion has been evaluated, resulting in practical constraints on countermeasure design and hazard assessment
A general relativistic model for the light propagation in the gravitational field of the Solar System: the dynamical case
Modern astrometry is based on angular measurements at the micro-arcsecond
level. At this accuracy a fully general relativistic treatment of the data
reduction is required. This paper concludes a series of articles dedicated to
the problem of relativistic light propagation, presenting the final
microarcsecond version of a relativistic astrometric model which enable us to
trace back the light path to its emitting source throughout the non-stationary
gravity field of the moving bodies in the Solar System. The previous model is
used as test-bed for numerical comparisons to the present one. Here we also
test different versions of the computer code implementing the model at
different levels of complexity to start exploring the best trade-off between
numerical efficiency and the micro-arcsecond accuracy needed to be reached.Comment: 40 pages, 5 figures. Accepted for publication on The Astrophysical
Journal. Manuscript prepared with AASLaTeX macros v.5.
Classifying structural alterations of the cytoskeleton by spectrum enhancement and descriptor fusion.
A classifier capable of ranking structural alterations of the cytoskeleton is developed. Images of cytoskeletal microtubules obtained from the epifluorescence microscopy of primary culture rat hepatocytes are analyzed. Morphological descriptors are extracted by contour and mass fractal analysis, direct methods, and spectrum enhancement. All methods are designed and tuned to make the extracted morphological descriptors insensitive to absolute fluorescence intensities. Spectrum enhancement is a nonlinear filter that involves spatial differentiation of the gray-scale image followed by conversion of power spectral density to the logarithmic scale and averaging over arcs in the reciprocal domain. Enhanced spectra exhibit local maxima that correspond to the structured microtubule bundles of a normal cytoskeleton. Descriptor fusion for classification is achieved by means of multivariate analysis. The classifier is trained by image sets representing normal ("negative control") microtubules and those altered by exposure to a fungicide at the highest dose of the experiment design. Some sensitivity and validation tests, including discriminant functions analysis, are applied to the classifier. The latter is applied to recognize images of microtubules not used in the training stage and comes from treatments at lower concentrations and shorter times. As a result, structural alterations are ranked and structural recovery after treatment is quantified. The method has potential use in quantitative, morphology-based tests on the cytoskeleton treated either by anticancer drugs or by cytotoxic agents
A mass-market Galileo receiver: Its algorithms and performance
The two main GNSS receiver market segments, professional high-precision receivers and mass market/consumer receivers, have very different structure, objectives, features, architecture, and cost. The code-delay estimation is performed in the software receiver by a parallel correlation unit, giving as output a multi-correlation with certain chip spacing. This approach presents some advantages, mostly the fact that the number of correlation values that can be provided is thousands of times greater, compared to a standard receiver channel. Use of multiple correlators increases multipath-rejection capabilities, essential features in mass-market receivers, especially for positioning in urban scenarios. The TTFF was estimated with about 50 tests, in hot, warm, and cold start, first using both GPS and Galileo satellites, and then using only one constellation. In the second case only the 2D fix is considered, since, according to the scenario described, at maximum three satellites are in view
Recommended from our members
Influence of Inter-Particle Friction and Damping on the Dynamics of Spherical Projectile Impacting Onto a Soil Bed
This study investigates the dynamics of a spherical projectile impact onto a granular bed via numerical simulations by discrete element method (DEM). The granular bed is modeled as an assembly of polydisperse spherical particles and the projectile is represented by a rigid sphere. The DEM model is used to investigate the cratering process, including the dynamics of the projectile and energy transformation and dissipation. The cratering process is illustrated by tracking the motion of the projectile and granular particles in the bed. The numerical results show that the dynamics of the projectile follows the generalized Poncelet law that the final penetration depth is a power-law function of the falling height. The numerical results can match well the experimental data reported in the literature, demonstrating the reliability of the DEM model in analyzing the impact of a spherical projectile on a granular bed. Further analyses illustrate that the impact process consists of three main stages, namely the impact, penetration and collapse, as characterized by the evolution of projective velocity, strong force chains and crater shape. The initial kinetic and potential energy of the projectile is dissipated mainly by inter-particle friction which governs the projectile dynamics. The stopping time of projectile decreases as the initial impact velocity increases. The final penetration depth scales as one-third the power of total falling height and is inversely proportional to the macroscopic granular friction coefficient.National Natural Science Foundation of China (No.
42107155), the Royal Society, Sino-British Fellowship Trust
International Exchanges Award (No. IES\R2\202023), the
Fundamental Research Funds for the Central Universities
(No. 2682021CX061), the National Key R&D Program of
China (No. 2017YFC1502500
Numerical analysis of deep-seated mass movements in the Magura Nappe; Flysch Belt of the Western Carpathians (Czech Republic)
Deep-seated slope failures are common features in the mountains of the Raca Unit, Magura Nappe of the Flysch Belt of Western Carpathians. Since they represent very complicated system, understanding of their evolution and triggers still remains unclear. We tried to provide a back-analysis of their development by using a finite difference code (FDM) of continua (Flac 4.0). We confirmed that such large mass movements could be triggered by water saturation of the bedrock in the three particular geological and geomorphic settings. Such situation could have been caused by heavy rainfalls in humid phases of the Holocene or permafrost melting in Late Glacial. The effects of faulting, very deep weathering of the bedrock, low geotechnical parameters of smectite-rich material and the local slope geometry have also been accounted for in numerical models, as well as the other triggering factors of slope instability. FDM modelled shear zones are in agreement with observations
- …