1,839 research outputs found
Use of high-dimensional spectral data to evaluate organic matter, reflectance relationships in soils
Recent breakthroughs in remote sensing technology have led to the development of a spaceborne high spectral resolution imaging sensor, HIRIS, to be launched in the mid-1990s for observation of earth surface features. The effects of organic carbon content on soil reflectance over the spectral range of HIRIS, and to examine the contributions of humic and fulvic acid fractions to soil reflectance was evaluated. Organic matter from four Indiana agricultural soils was extracted, fractionated, and purified, and six individual components of each soil were isolated and prepared for spectral analysis. The four soils, ranging in organic carbon content from 0.99 percent, represented various combinations of genetic parameters such as parent material, age, drainage, and native vegetation. An experimental procedure was developed to measure reflectance of very small soil and organic component samples in the laboratory, simulating the spectral coverage and resolution of the HIRIS sensor. Reflectance in 210 narrow (10 nm) bands was measured using the CARY 17D spectrophotometer over the 400 to 2500 nm wavelength range. Reflectance data were analyzed statistically to determine the regions of the reflective spectrum which provided useful information about soil organic matter content and composition. Wavebands providing significant information about soil organic carbon content were located in all three major regions of the reflective spectrum: visible, near infrared, and middle infrared. The purified humic acid fractions of the four soils were separable in six bands in the 1600 to 2400 nm range, suggesting that longwave middle infrared reflectance may be useful as a non-destructive laboratory technique for humic acid characterization
Simulations of gas puff effects on edge density and ICRF coupling in ASDEX upgrade using EMC3-Eirene
3D simulations of gas puff effects on edge density and ICRF coupling in ASDEX Upgrade
In recent experiments, a local gas puff was found to be an effective way to tailor the scrape-off layer (SOL) density and improve the ion cyclotron range of frequency (ICRF) power coupling in tokamaks. In order to quantitatively reproduce these experiments, to understand the corresponding physics and to optimize the gas valve positions and rates, simulations were carried out with the 3D edge plasma transport code EMC3-EIRENE in ASDEX Upgrade. An inter-ELM phase of an H-mode discharge with a moderate gas puff rate (1.2 x 10(22) electrons s(-1)) is used in our simulations. We simulated cases with gas puff in the lower divertor, the outer mid-plane and the top of the machine while keeping other conditions the same. Compared with the lower divertor gas puff, the outer mid-plane gas puff can increase the local density in front of the antennas most effectively, while a toroidally uniform but significantly smaller enhancement is found for the top gas puff. Good agreement between our simulations and experiments is obtained. With further simulations, the mechanisms of SOL density tailoring via local gas puffing and the strategies of gas puff optimization are discussed in the paper
Quantum Electrodynamics at Large Distances II: Nature of the Dominant Singularities
Accurate calculations of macroscopic and mesoscopic properties in quantum
electrodynamics require careful treatment of infrared divergences: standard
treatments introduce spurious large-distances effects. A method for computing
these properties was developed in a companion paper. That method depends upon a
result obtained here about the nature of the singularities that produce the
dominant large-distance behaviour. If all particles in a quantum field theory
have non-zero mass then the Landau-Nakanishi diagrams give strong conditions on
the singularities of the scattering functions. These conditions are severely
weakened in quantum electrodynamics by effects of points where photon momenta
vanish. A new kind of Landau-Nakanishi diagram is developed here. It is geared
specifically to the pole-decomposition functions that dominate the macroscopic
behaviour in quantum electrodynamics, and leads to strong results for these
functions at points where photon momenta vanish.Comment: 40 pages, 11 encapsulated postscript figures, latexed,
math_macros.tex can be found on Archive. full postscript available from
http://theorl.lbl.gov/www/theorgroup/papers/35972.p
Global turbulence simulations of the tokamak edge region with GRILLIX
Turbulent dynamics in the scrape-off layer (SOL) of magnetic fusion devices
is intermittent with large fluctuations in density and pressure. Therefore, a
model is required that allows perturbations of similar or even larger magnitude
to the time-averaged background value. The fluid-turbulence code GRILLIX is
extended to such a global model, which consistently accounts for large
variation in plasma parameters. Derived from the drift reduced Braginskii
equations, the new GRILLIX model includes electromagnetic and electron-thermal
dynamics, retains global parametric dependencies and the Boussinesq
approximation is not applied. The penalisation technique is combined with the
flux-coordinate independent (FCI) approach [F. Hariri and M. Ottaviani,
Comput.Phys.Commun. 184:2419, (2013); A. Stegmeir et al., Comput.Phys.Commun.
198:139, (2016)], which allows to study realistic diverted geometries with
X-point(s) and general boundary contours. We characterise results from
turbulence simulations and investigate the effect of geometry by comparing
simulations in circular geometry with toroidal limiter against realistic
diverted geometry at otherwise comparable parameters. Turbulence is found to be
intermittent with relative fluctuation levels of up to 40% showing that a
global description is indeed important. At the same time via direct comparison,
we find that the Boussinesq approximation has only a small quantitative impact
in a turbulent environment. In comparison to circular geometry the fluctuations
are reduced in diverted geometry, which is related to a different zonal flow
structure. Moreover, the fluctuation level has a more complex spatial
distribution in diverted geometry. Due to local magnetic shear, which differs
fundamentally in circular and diverted geometry, turbulent structures become
strongly distorted in the perpendicular direction and are eventually damped
away towards the X-point
3D simulations of gas puff effects on edge plasma and ICRF coupling in JET
Recent JET (ITER-Like Wall) experiments have shown that the fueling gas puffed from different locations of the vessel can result in different scrape-off layer (SOL) density profiles and therefore different radio frequency (RF) coupling. To reproduce the experimental observations, to understand the associated physics and to optimize the gas puff methods, we have carried out three-dimensional (3D) simulations with the EMC3-EIRENE code in JET-ILW including a realistic description of the vessel geometry and the gas injection modules (GIMs) configuration. Various gas puffing methods have been investigated, in which the location of gas fueling is the only variable parameter. The simulation results are in quantitative agreement with the experimental measurements. They confirm that compared to divertor gas fueling, mid-plane gas puffing increases the SOL density most significantly but locally, while top gas puffing increases it uniformly in toroidal direction but to a lower degree. Moreover, the present analysis corroborates the experimental findings that combined gas puff scenarios-based on distributed main chamber gas puffing-can be effective in increasing the RF coupling for multiple antennas simultaneously. The results indicate that the spreading of the gas, the local ionization and the transport of the ionized gas along the magnetic field lines connecting the local gas cloud in front of the GIMs to the antennas are responsible for the enhanced SOL density and thus the larger RF coupling
Modelling of the ICRF induced E x B convection in the scrape-off-layer of ASDEX Upgrade
In magnetic controlled fusion devices, plasma heating with radio-frequency (RF) waves in the ion cyclotron (IC) range of frequency relies on the electric field of the fast wave to heat the plasma. However, the slow wave can be generated parasitically. The electric field of the slow wave can induce large biased plasma potential (DC potential) through sheath rectification. The rapid variation of the rectified potential across the equilibrium magnetic field can cause significant convective transport (E x B drifts) in the scrape-off layer (SOL). In order to understand this phenomenon and reproduce the experiments, 3D realistic simulations are carried out with the 3D edge plasma fluid and kinetic neutral code EMC3-Eirene in ASDEX Upgrade. For this, we have added the prescribed drift terms to the EMC3 equations and verified the 3D code results against the analytical ones in cylindrical geometry. The edge plasma potential derived from the experiments is used to calculate the drift velocities, which are then treated as input fields in the code to obtain the final density distributions. Our simulation results are in good agreement with the experiments
Intruder bands and configuration mixing in the lead isotopes
A three-configuration mixing calculation is performed in the context of the
interacting boson model with the aim to describe recently observed collective
bands built on low-lying states in neutron-deficient lead isotopes. The
configurations that are included correspond to the regular, spherical states as
well as two-particle two-hole and four-particle four-hole excitations across
the Z=82 shell gap.Comment: 20 pages, 4 figures, accepted by PRC, reference added for section 1
in this revised versio
- …