2,717 research outputs found
The surprising lability of bis(2,2’:6’,2’’-terpyridine)- chromium(III) complexes
The complex [Cr(tpy)(O3SCF3)3] (tpy = 2,2′:6′,2′′-terpyridine) is readily made from [Cr(tpy)Cl3] and is a convenient precursor to [Cr(tpy)2][PF6]3 and to [Cr(tpy)(4′-(4-tolyl)tpy)][PF6]3 and [Cr(tpy)(5,5′′-Me2tpy)][PF6]3 (4′-(4-tolyl)tpy = 4′-(4-tolyl)-2,2′:6′,2′′-terpyridine; 5,5′′-Me2tpy = 5,5′′-dimethyl-2,2′:6′,2′′-terpyridine); these are the first examples of heteroleptic bis(tpy) chromium(III) complexes. The single crystal structures of 2{[Cr(tpy)2][PF6]3}·5MeCN, [Cr(tpy)(4′-(4-tolyl)tpy)][PF6]3·3MeCN and [Cr(tpy)(5,5′′-Me2tpy)][PF6]3·3MeCN have been determined. Each cation contains the expected octahedral {Cr(tpy)2}3+ unit; in all three structures, the need to accommodate three anions per cation and the solvent molecules prevents the formation of a grid-like array of cations that is typical of many lattices containing {M(tpy)2}2+ motifs. Three reversible electrochemical processes are observed for [Cr(tpy)(4′-(4-tolyl)tpy)][PF6]3 and [Cr(tpy)(5,5′′-Me2tpy)][PF6]3, consistent with those documented for [Cr(tpy)2]3+. At pH 6.36, aqueous solutions of [Cr(tpy)2][PF6]3 are stable for at least two months. However, contrary to the expectations of the d3 Cr3+ ion being a kinetically inert metal centre, the tpy ligands in [Cr(tpy)2]3+are labile in the presence of base; absorption and 1H NMR spectroscopies have been used to monitor the effects of adding NaOH to aqueous and CD3OD solutions, respectively, of the homo- and heteroleptic complexes. Ligand dissociation is also observed when [Bu4N]F is added to CD3OD solutions of the complexes, but in aqueous solution, [Cr(tpy)2][PF6]3 is stable in the presence of fluoride ion
The d(10) route to dye-sensitized solar cells: step-wise assembly of zinc(II) photosensitizers on TiO2 surfaces
Dye-sensitized solar cells have been assembled using a sequential approach: a TiO2 surface was functionalized with an anchoring ligand, followed by metallation with Zn(OAc)(2) or ZnCl2, and subsequent capping with a chromophore functionalized 2,2`:6`,2 ``-terpyridine; the DSCs exhibit surprisingly good efficiencies confirming the effectiveness of the new strategy for zinc-based DSC fabrication
Constructing chiral MOFs by functionalizing 4,2′:6′,4″-terpyridine with long-chain alkoxy domains: rare examples of neb nets
Reactions of 4′-(4- n alkyloxyphenyl)-4,2′:6′,4″-terpyridines (alkyl = hexyl or nonyl) with CoIJNCS) 2 lead to three structurally characterized chiral 3D assemblies which adopt rare neb topologies. For the n hexyl-functionalized ligands, both enantiomorphic lattices of the neb nets (crystallizing in the tetragonal space groups P4 1 2 1 2 and P4 3 2 1 2, respectively) are presente
[Ir(C^N)2(N^N)]+ emitters containing a naphthalene unit within a linker between the two cyclometallating ligands
The synthesis of four cyclometallated [Ir(C^N) 2 (N^N)][PF 6 ] compounds in which N^N is a substituted 2,2’- -bipyridine (bpy) ligand and the naphthyl-centred ligand 2,7-bis(2-(2-(4-(pyridin-2-yl)phenoxy)ethoxy) ethoxy)naphthalene provides the two cyclometallating C^N units is reported. The iridium( III ) complexes have been characterized by 1 H and 13 C NMR spectroscopies, mass spectrometry and elemental analysis, and their electrochemical and photophysical properties are described. Comparisons are made with a model [Ir(ppy) 2 (N^N)][PF 6 ] compound (Hppy = 2-phenylpyridine). The complexes containing the naphthyl-unit exhibit similar absorption spectra and excitation at 280 nm leads to an orange emission. The incorporation of the naphthalene unit does not lead to a desirable blue contribution to the emission. Density functional theory calculations were performed to investigate the geometries of the complexes in their ground and first triplet excited states, as well as the energies and compositions of the highestoccupied and lowest unoccupied molecular orbital (HOMO and LUMO) manifolds. Trends in the HOMO– LUMO gaps agree with those observed electrochemically. The energy difference between the LUMO and the lowest unoccupied MO located on the naphthyl unit (LUMO+7) is large enough to explain why there is no contribution from the naphthyl-centred triplet excited state to the phosphorescence emission. Singlet excited states were also investigated. Light-emitting electrochemical cells (LECs) using the [Ir(C^N) 2 (N^N)][PF 6 ] and [Ir(ppy) 2 (N^N)][PF 6 ] complexes in the emissive layer were made and evaluated. The presence of the naphthyl-bridge between the cyclometallating units does not significantly alter the device response
When Stereochemistry Raised Its Ugly Head in Coordination Chemistry-An Appreciation of Howard Flack
Chiral compounds have played an important role in the development of coordination chemistry. Unlike organic chemistry, where mechanistic rules allowed the establishment of absolute configurations for numerous compounds once a single absolute determination had been made, coordination compounds are more complex. This article discusses the development of crystallographic methods and the interplay with coordination chemistry. Most importantly, the development of the Flack parameter is identified as providing a routine method for determining the absolute configuration of coordination compounds
Isomers of Terpyridine as Ligands inCoordination Polymers and Networks Containing Zinc(II) and Cadmium(II)
The use of divergent 4,2′:6′,4″- and 3,2′:6′,3″-terpyridine ligands as linkers and/or nodes in extended coordination assemblies has gained in popularity over the last decade. However, there is also a range of coordination polymers which feature 2,2′:6′,2″-terpyridine metal-binding domains. Of the remaining 45 isomers of terpyridine, few have been utilized in extended coordination arrays. Here, we provide an overview of coordination polymers and networks containing isomers of terpyridine and either zinc(II) and cadmium(II). Although the motivation for investigations of many of these systems is their luminescent behavior, we have chosen to focus mainly on structural details, and we assess to what extent assemblies are reproducible. We also consider cases where there is structural evidence for competitive product formation. A point that emerges is the lack of systematic investigation
Packing Motifs in [M(bpy)₂X₂] Coordination Compounds (bpy = 2,2′-bipyridine; X = F, Cl, Br, I)
Packing motifs within structurally characterized cis-[M(bpy)2X2] (M = any metal, bpy = 2,20-bipyridine, X = F, Cl, Br, I) coordination compounds have been investigated using data from the Cambridge Structural Database. Compounds fall into two classes: non-solvated cis-[M(bpy)2X2] moieties and those with additional lattice molecules (solvent or other molecules). A recurring packing motif is a dimeric unit involving intermolecular face-to-face -stacking of bpy ligands and CHbpy...X contacts, although in several cases, slippage of the stacked bpy units reduces the effectiveness of the face-to-face interaction leaving the CHbpy...X contacts as the dominant crystal-packing interaction. The prevalence of the dimeric unit versus the assembly of 1D-chains in the solid state is described
Solar energy conversion using first row d-block metal coordination compound sensitizers and redox mediators
The use of renewable energy is essential for the future of the Earth, and solar photons are the ultimate source of energy to satisfy the ever-increasing global energy demands. Photoconversion using dye-sensitized solar cells (DSCs) is becoming an established technology to contribute to the sustainable energy market, and among state-of-the art DSCs are those which rely on ruthenium(ii) sensitizers and the triiodide/iodide (I(3)(−)/I(−)) redox mediator. Ruthenium is a critical raw material, and in this review, we focus on the use of coordination complexes of the more abundant first row d-block metals, in particular copper, iron and zinc, as dyes in DSCs. A major challenge in these DSCs is an enhancement of their photoconversion efficiencies (PCEs) which currently lag significantly behind those containing ruthenium-based dyes. The redox mediator in a DSC is responsible for regenerating the ground state of the dye. Although the I(3)(−)/I(−) couple has become an established redox shuttle, it has disadvantages: its redox potential limits the values of the open-circuit voltage (V(OC)) in the DSC and its use creates a corrosive chemical environment within the DSC which impacts upon the long-term stability of the cells. First row d-block metal coordination compounds, especially those containing cobalt, and copper, have come to the fore in the development of alternative redox mediators and we detail the progress in this field over the last decade, with particular attention to Cu(2+)/Cu(+) redox mediators which, when coupled with appropriate dyes, have achieved V(OC) values in excess of 1000 mV. We also draw attention to aspects of the recyclability of DSCs
Chemical bonding: the journey from miniature hooks to density functional theory
Our modern understanding of chemistry is predicated upon bonding interactions between atoms and ions resulting in the assembly of all of the forms of matter that we encounter in our daily life. It was not always so. This review article traces the development of our understanding of bonding from prehistory, through the debates in the 19th century C.E. bearing on valence, to modern quantum chemical models and beyon
Before Radicals Were Free-The Radical Particulier of de Morveau
Today, we universally understand radicals to be chemical species with an unpaired electron. It was not always so, and this article traces the evolution of the term radical and in this journey, monitors the development of some of the great theories of organic chemistr
- …