5 research outputs found
The particle size distribution (PSD) as criteria for comparison of silver powders obtained by different methods of synthesis and by conditions of electrolysis
Silver powders produced by both electrochemical (galvanostatic (DC) and potentiostatic (POT) regimes of electrolysis) and chemical processes were examined by scanning electron microscope, and particle size distribution (PSD) of the obtained particles was done. In the DC regime, the current densities of -14.4 mA cm-2 for the nitrate (NIT; powder denoted with DC(NIT)) and -13.05 mA cm-2 for the ammonium (AM; DC(AM)) electrolytes were applied. In the POT regime, the used overpotentials were -90 mV (NIT(90)) and -150 mV (NIT(150)) for the nitrate, and -625 mV (AM(625)) and -925 mV (AM(925)) for the ammonium electrolytes. Reduction with hydrazine was used for chemical synthesis (powder denoted with HYD). On the basis of SEM and PSD analysis, Ag powders were grouped into three groups. In the first group DC(AM), AM(925) and HYD powders with the (8.4-8.9 %) volume ratios were placed. In the second group were AM(625) and DC(NIT) powders with the (6.5-6.6 %) volume ratios. NIT(90) and NIT(150) powders with the volume ratios of (5.2-5.7 %) made the third group. The obtained volume ratios were correlated with the morphology of synthesized particles in order to perceive advantages and lacks of powder production via electrochemical and chemical routes
Hydrogen Kinetics and Hydride Formation Effect on Zr-1Nb and Zr-1Nb-1Sn-0.1Fe Alloys for Nuclear Application
The possibility of the boronizing process on the pressed samples of iron powder
The paper presents results of the experimental investigation of the boronizing process on nonsintering iron powder samples (NC100.24, Höganäs, Sweden). Experiments are planned within the limits of applicability of simultaneous sintering at chemical-thermal treatment process (boronizing). The simlex plan of 15 experimental points was used for the experiment, while a polynomial function of fourth degree was employed in the modeling of a mixture composition based on the volume changes, porosity and the depth layer changes. Boronizing was carried out in mixture with born carbide by addition of ammonium bifluoride, ammonium chloride and boron potassium fluoride as activators, by proportion definited plan
The particle size distribution (PSD) as criteria for comparison of silver powders obtained by different methods of synthesis and by conditions of electrolysis
Silver powders produced by both electrochemical (galvanostatic (DC) and potentiostatic (POT) regimes of electrolysis) and chemical processes were examined by scanning electron microscope, and particle size distribution (PSD) of the obtained particles was done. In the DC regime, the current densities of –14.4 mA cm-2 for the nitrate (NIT; powder denoted with DC(NIT)) and –13.05 mA cm-2 for the ammonium (AM; DC(AM)) electrolytes were applied. In the POT regime, the used overpotentials were –90 mV (NIT(90)) and –150 mV (NIT(150)) for the nitrate, and –625 mV (AM(625)) and –925 mV (AM(925)) for the ammonium electrolytes. Reduction with hydrazine was used for chemical synthesis (powder denoted with HYD). On the basis of SEM and PSD analysis, Ag powders were grouped into three groups. In the first group DC(AM), AM(925) and HYD powders with the (8.4–8.9 %) volume ratios were placed. In the second group were AM(625) and DC(NIT) powders with the (6.5–6.6 %) volume ratios. NIT(90) and NIT(150) powders with the volume ratios of (5.2–5.7 %) made the third group. The obtained volume ratios were correlated with the morphology of synthesized particles in order to perceive advantages and lacks of powder production via electrochemical and chemical routes