1,443 research outputs found
<renal and vascular changes produced by weightlessness for the purpose of defining and verifying an experiment suitable for use in a biosatellite< progress report
Blood flow measured by electromagnetic flow meter to determine cardiac outpu
Increases in the Irreversibility Field and the Upper Critical Field of Bulk MgB2 by ZrB2 Addition
In a study of the influence of ZrB2 additions on the irreversibility field,
Birr and the upper critical field Bc2, bulk samples with 7.5 at. % ZrB2
additions were made by a powder milling and compaction technique. These samples
were then heated to 700-900C for 0.5 hours. Resistive transitions were measured
at 4.2 K and Birr and Bc2 values were determined. An increase in Bc2 from 20.5
T to 28.6 T and enhancement of Birr from 16 T to 24 T were observed in the ZrB2
doped sample as compared to the binary sample at 4.2 K. Critical field
increases similar to those found with SiC doping were seen at 4.2 K. At higher
temperatures, increases in Birr were also determined by M-H loop extrapolation
and closure. Values of Birr which were enhanced with ZrB2 doping (as compared
to the binary) were seen at temperatures up to 34 K, with Birr values larger
than those for SiC doped samples at higher temperatures. The transition
temperature, Tc, was then measured using DC susceptibility and a 2.5 K drop of
the midpoint of Tc was observed. The critical current density was determined
using magnetic measurements and was found to increase at all temperatures
between 4.2 K and 35 K with ZrB2 doping.Comment: 15 pages, 5 figs, 1 tabl
Performance management practices within emerging market multinational enterprises: the case of Brazilian multinationals
This study advances our understanding of HRM within EM-MNEs by examining the extent to, and mechanism by, which Brazilian MNEs standardize or localise their performance management (PM) policies and practices, and the factors that influence their design and implementation. We explored these issues through qualitative case studies of three Brazilian MNEs. The analysis of interview data reveals a strong tendency for Brazilian MNEs to centralise and standardise their PM policies and practices. The key finding of this paper is that PM practices within Brazilian MNEs are not based on indigenous Brazilian practices, but rather, are heavily influenced by global best practices. The findings are at odds with previous research, which suggests that EM-MNEs apply different HR practices in developed country subsidiaries and developing country subsidiaries. Also, contrary to expectations, our results indicate that institutional distance does not have a significant influence on the adaptation of PM practices at subsidiary level
AC Loss and Contact Resistance In Copper-Stabilized Nb3Al Rutherford Cables with and without a Stainless Steel Core
Calorimetric measurements of AC loss and hence interstrand contact resistance
(ICR), were measured on three samples of Rutherford cable wound with
Cu-stabilized jelly-roll type unplated Nb3Al strand. One of the cable types was
furnished with a thin core of AISI 316L stainless steel and the other two were
both uncored but insulated in different ways. The cables were subjected to a
room-temperature-applied uniaxial pressure of 12 MPa that was maintained during
the reaction heat treatment (RHT), then vacuum impregnated with CTD 101 epoxy,
and repressurized to 100 MPa during AC-loss measurement. The measurements were
performed at 4.2 K in a sinusoidal field of amplitude 400 mT at frequencies of
1 to 90 mHz (no DC-bias field) that was applied both perpendicular and parallel
to the face of the cable (the face-on, FO, and edge-on, EO, directions,
respectively). For the cored cable the FO-measured effective ICR (FO-ICR), was
5.27 . Those for the uncored cables were less than 0.08
. As shown previously for NbTi- and Nb3Sn-based Rutherford
cables, the FO-ICR can be significantly increased by the insertion of a core,
although in this case it is still below the range recommended for
accelerator-magnet use. Post-measurement dissection of one of the cables showed
that the impregnating resin had permeated between the strands and coated the
core with a thin, insulating layer excepting for some sintered points of
contact. In the uncored cables the strands were coated with resin except for
the points of interstrand contact. It is suggested that in the latter case this
tendency for partial coating leads to a processing-sensitive FO-ICR.Comment: Four pages, with two figure
Ultrasound enhancement of microfiltration performance for natural organic matter removal
Sonication of water at 1500 W power prior to microfiltration showed that short sonication times (60 s) gave a reduced flux decline. It is suggested that a less potent, smaller molecular form of the natural organic matter (NOM) was produced by sonication. Longer sonication times diminished this beneficial effect. This may be due to the formation of aggregates or compounds that are more readily adsorbed on the membrane. Where the sonication was preceded by an alum treatment, the flux loss showed a regular decrease with longer sonication times. It is suggested that the effects of sonication on the alum flocs and on the flocs; NOM interactions may play a critical role in regulating the flux. Where sand was present on sonication at 800 and 1400 W, the cavitational energy was focussed on adsorbed organic material, resulting in more efficient destruction and the formation of compounds that counteracted the flux enhancement
Transport and magnetic Jc of MgB2 strands and small helical coils
The critical current densities of MgB2 monofilamentary strands with and
without SiC additions were measured at 4.2 K. Additionally, magnetic Jc at B =
1 T was measured from 4.2 K to 40 K. Various heat treatment times and
temperatures were investigated for both short samples and small helical coils.
SiC additions were seen to improve high field transport Jc at 4.2 K, but
improvements were not evident at 1 T at any temperature. Transport results were
relatively insensitive to heat treatment times and temperatures for both short
samples and coils in the 700C to 900C range.Comment: 8 text pages, 1 table, 4 fig
Evaporation of ices near massive stars: models based on laboratory TPD data
Hot cores and their precursors contain an integrated record of the physics of
the collapse process in the chemistry of the ices deposited during that
collapse. In this paper, we present results from a new model of the chemistry
near high mass stars in which the desorption of each species in the ice mixture
is described as indicated by new experimental results obtained under conditions
similar to those hot cores. Our models show that provided there is a monotonic
increase in the temperature of the gas and dust surrounding the protostar, the
changes in the chemical evolution of each species due to differential
desorption are important. The species HS, SO, SO, OCS, HCS, CS, NS,
CHOH, HCOOCH, CHCO, CHOH show a strong time dependence that
may be a useful signature of time evolution in the warm-up phase as the star
moves on to the Main Sequence. This preliminary study demonstrates the
consequences of incorporating reliable TPD data into chemical models.Comment: 5 pages, accepted by MNRA
Beyond mainstreaming to least restrictive environment
Central to integration is the idea of moving the student as soon as possible to a less restrictive setting as far along the continuum as appropriate
- …