Triple-Mode Cavity Bandpass Filter on Doublet with Controllable Transmission Zeros

© 2013 IEEE. On the basis of doublet and its properties, a class of multiple-mode narrow band bandpasss filter is designed and fabricated by simultaneously exploiting the three resonant modes in a single rectangular cavity: TE101, TE011, and TM110 modes. The input/output ports of the proposed filter are fed by coupling a microstrip line to a slot on the side wall of a rectangular cavity. Different modes are excited by changing the position and shape of the two slots at input and output of the rectangular cavity without any intra-cavity coupling. Besides three poles within the passband, a pair of transmission zeros (TZs) is achieved, which can be controlled independently by setting the positions of the two TZs at the lower and/or upper stopband. High stopband attenuation and high filtering selectivity are achieved by considerably allocating three transmission poles and two zeros. In order to verify the proposed theory, two filter prototypes are fabricated and measured

Individually Frequency Tunable Dual- and Triple-band Filters in a Single Cavity

© 2013 IEEE. This paper presents a new class of second-order individually and continuously tunable dual- and triple-band bandpass filters in a single metal cavity. Each passband is realized by two identical metal posts. These dual- and triple-band tunable filters are achieved by putting two or three identical sets of metal-post pair in a single metal cavity. Metal screws are co-designed as a part of the metal posts to control their insertion depth inside the cavity. In this way, the resonant frequencies can be continuously controlled and designed at the desired frequency bands. Moreover, the distance between the two metal posts in a post pair can be freely tuned. Thus, the external quality factor (Qe) and coupling coefficient (k) between the adjacent modes can be easily adjusted to meet the specified requirement in synthesis design. At the bottom of the cavity, some grooves are used to extend the tunable frequency range and make the resonant frequency linearly varied with the height of the metal post. The center frequency of each passband can be independently tuned with a frequency range of 0.8-3.2 GHz and tunable ratio of 4. Finally, the continuously tunable dual- and triple-band bandpass filters prototypes with second order response are designed and fabricated, of which each passband can be individually tuned with a large tuning range

Identification of genes differentially expressed in Jining Grey and Liaoning Cashmere goats ovaries

To search for genes controlling high prolificacy of Chinese indigenous goats, differential display reverse transcription-polymerase chain reaction (DDRT-PCR) was used to screen differentially expressed cDNA bands in the sexually matured ovaries of 3-year-old prolific Jining Grey goats and monotocous Liaoning Cashmere goats with 24 combinations of three anchored primers and eight arbitrary primers. 22 expressed sequence tags (ESTs) were proved to be the positive bands by Northern hybridization. They comprised 10 known ESTs and 12 ESTs without homologous sequences in the GenBank. These results indicate that several genes such as GATA-4, metallothionein-like protein, CAT genes and unknown ESTs (CV983340 and CV983341) were expressed only in Jining Grey goats.Keywords: Differential display reverse transcription-polymerase chain reaction, goat, ovary, prolificacyAfrican Journal of Biotechnology Vol. 12(27), pp. 4408-441

Validation of the disease-specific components of the Kidney Disease Quality of Life-36 (KDQOL-36) in Chinese patients undergoing maintenance dialysis

AIM: The aim of this study was to evaluate the validity, reliability and sensitivity of the disease-specific items of the Kidney Disease Quality of Life-36 (KDQOL-36) in Chinese patients undergoing maintenance dialysis. METHODS: The content validity was assessed by content validity index (CVI) in ten subjects. 356 subjects were recruited for pilot psychometric testing. The internal construct validity was assessed by corrected item-subscale total correlation. Confirmatory factor analysis (CFA) was used to confirm the factor structure. The convergent validity was assessed by Pearson's correlation test between the disease specific subscale scores and SF-12 version 2 Health Survey (SF-12 v2) scores. The reliability was assessed by the internal consistency (Cronbach's Alpha coefficient) and 2-week test-retest reliability (intraclass correlation coefficient (ICC)). The sensitivity was determined by performing known group comparisons by independent t-test. RESULTS: The CVI on clarity and relevance was â ¥ 0.9 for all items. Corrected item- total correlation scores were â ¥0.4 for all, except an item related to problems with access site. CFA confirmed the 3-factor structure of the disease-specific component of the KDQOL-36. The correlation coefficients between the disease-specific domain scores and the SF-12 v2 physical and mental component summary scores ranged from 0.328 to 0.492. The reliability was good (Cronbach's alpha coefficients ranged from 0.810 to 0.931, ICC ranged from 0.792 to 0.924). Only the effect subscale was sensitive in detecting differences in HRQOL between haemodialysis and peritoneal dialysis patients, with effect size = 0.68. CONCLUSION: The disease-specific items of the KDQOL-36 are a valid, reliable and sensitive measure to assess the health-related quality of life of Chinese patients on maintenance dialysis.published_or_final_versio

Core structures of the decorate edge dislocations in GaN epilayers

Threading dislocations with edge components were investigated by a high-resolution transmission electron microscope in undoped GaN epilayers grown on Al2O3 substrates. Two types of core images were observed. One is a fully filled core with regular contraction and expansion of diffraction bright dots and the other is incompletely filled with one bright dot less and irregular contraction and expansion of bright dots. The impurities around the cores were detected to contain oxygen and carbon elements by energy-dispersive x-ray spectrometer. This suggests that both types of dislocations be decorated with impurities

Low-temperature microstructural studies on superconducting CaFe2As2.

Undoped CaFe2As2 (Ca122) can be stabilized in two slightly different non-superconducting tetragonal phases, PI and PII, through thermal treatments. Upon proper annealing, superconductivity with a Tc up to 25 K emerges in the samples with an admixture of PI and PII phases. Systematic low-temperature X-ray diffraction studies were conducted on undoped Ca122 samples annealed at 350 °C over different time periods. In addition to the diffraction peaks associated with the single-phase aggregation of PI and PII, a broad intermediate peak that shifts with annealing time was observed in the superconducting samples only. Our simulation of phase distribution suggests that the extra peak is associated with the admixture of PI and PII on the nanometer scale. High-resolution transmission electron microscopy confirms the existence of these nano-scale phase admixtures in the superconducting samples. These experimental results and simulation analyses lend further support for our conclusion that interfacial inducement is the most reasonable explanation for the emergence of superconductivity in undoped Ca122 single crystals

Controlled synthesis of high-ortho-substitution phenol-formaldehyde resins

The relationship between the use of 19 kinds of metal catalysts and the proportion of ortho-ortho links of novolac resins was studied. The proportion of ortho-ortho links of novolac resins was characterized with Fourier transform infrared, H-1-NMR, and C-13-NMR. The effects of different catalysts and different reaction conditions, such as the molar ratio of phenol to formaldehyde, the pH value of the reaction, and the reaction time, were examined. Phenolformaldehyde resins were synthesized with a certain proportion of the ortho position through the adjustment of the reaction conditions. (c) 2005 Wiley Periodicals, Inc

Ipl1/aurora kinase suppresses S-CDK-driven spindle formation during prophase I to ensure chromosome integrity during meiosis

Cells coordinate spindle formation with DNA repair and morphological modifications to chromosomes prior to their segregation to prevent cell division with damaged chromosomes. Here we uncover a novel and unexpected role for Aurora kinase in preventing the formation of spindles by Clb5-CDK (S-CDK) during meiotic prophase I and when the DDR is active in budding yeast. This is critical since S-CDK is essential for replication during premeiotic S-phase as well as double-strand break induction that facilitates meiotic recombination and, ultimately, chromosome segregation. Furthermore, we find that depletion of Cdc5 polo kinase activity delays spindle formation in DDR-arrested cells and that ectopic expression of Cdc5 in prophase I enhances spindle formation, when Ipl1 is depleted. Our findings establish a new paradigm for Aurora kinase function in both negative and positive regulation of spindle dynamics

Formation of GaAs hollow above InAs quantum dots

GaAs hollow nanostructure is constructed above low-temperature (250 Cdegrees) InAs quantum dots after a thin GaAs layer capping at 480 degreesC. The hollows mostly disappeared after the high temperature annealing at 580degreesC. The formation mechanism is simply discussed

Fabrication of Porous Anodic Alumina with Ultrasmall Nanopores

Anodization of Al foil under low voltages of 1–10 V was conducted to obtain porous anodic aluminas (PAAs) with ultrasmall nanopores. Regular nanopore arrays with pore diameter 6–10 nm were realized in four different electrolytes under 0–30°C according to the AFM, FESEM, TEM images and current evolution curves. It is found that the pore diameter and interpore distance, as well as the barrier layer thickness, are not sensitive to the applied potentials and electrolytes, which is totally different from the rules of general PAA fabrication. The brand-new formation mechanism has been revealed by the AFM study on the samples anodized for very short durations of 2–60 s. It is discovered for the first time that the regular nanoparticles come into being under 1–10 V at the beginning of the anodization and then serve as a template layer dominating the formation of ultrasmall nanopores. Under higher potentials from 10 to 40 V, the surface nanoparticles will be less and less and nanopores transform into general PAAs