63 research outputs found
Study of exclusive one-pion and one-eta production using hadron and dielectron channels in pp reactions at kinetic beam energies of 1.25 GeV and 2.2 GeV with HADES
We present measurements of exclusive ensuremathπ+,0 and η production in pp reactions at 1.25GeV and 2.2GeV beam kinetic energy in hadron and dielectron channels. In the case of π+ and π0 , high-statistics invariant-mass and angular distributions are obtained within the HADES acceptance as well as acceptance-corrected distributions, which are compared to a resonance model. The sensitivity of the data to the yield and production angular distribution of Δ (1232) and higher-lying baryon resonances is shown, and an improved parameterization is proposed. The extracted cross-sections are of special interest in the case of pp → pp η , since controversial data exist at 2.0GeV; we find \ensuremathσ=0.142±0.022 mb. Using the dielectron channels, the π0 and η Dalitz decay signals are reconstructed with yields fully consistent with the hadronic channels. The electron invariant masses and acceptance-corrected helicity angle distributions are found in good agreement with model predictions
Treatment Guidelines for Hyponatremia Stay the Course
International guidelines designed to minimize the risk of complications that can occur when correcting severe hyponatremia have been widely accepted for a decade. On the basis of the results of a recent large retrospective study of patients hospitalized with hyponatremia, it has been suggested that hyponatremia guidelines have gone too far in limiting the rate of rise of the serum sodium concentration; the need for therapeutic caution and frequent monitoring of the serum sodium concentration has been questioned. These assertions are reminiscent of a controversy that began many years ago. After reviewing the history of that controversy, the evidence supporting the guidelines, and the validity of data challenging them, we conclude that current safeguards should not be abandoned. To do so would be akin to discarding your umbrella because you remained dry in a rainstorm. The authors of this review, who represent 20 medical centers in nine countries, have all contributed significantly to the literature on the subject. We urge clinicians to continue to treat severe hyponatremia cautiously and to wait for better evidence before adopting less stringent therapeutic limits.</p
Multicenter Evaluation of a 0-Hour/1-Hour Algorithm in the Diagnosis of Myocardial Infarction With High-Sensitivity Cardiac Troponin T
Study objectiveWe aim to prospectively validate the diagnostic accuracy of the recently developed 0-h/1-h algorithm, using high-sensitivity cardiac troponin T (hs-cTnT) for the early rule-out and rule-in of acute myocardial infarction.MethodsWe enrolled patients presenting with suspected acute myocardial infarction and recent (<6 hours) onset of symptoms to the emergency department in a global multicenter diagnostic study. Hs-cTnT (Roche Diagnostics) and sensitive cardiac troponin I (Siemens Healthcare) were measured at presentation and after 1 hour, 2 hours, and 4 to 14 hours in a central laboratory. Patient triage according to the predefined hs-cTnT 0-hour/1-hour algorithm (hs-cTnT below 12 ng/L and Δ1 hour below 3 ng/L to rule out; hs-cTnT at least 52 ng/L or Δ1 hour at least 5 ng/L to rule in; remaining patients to the “observational zone”) was compared against a centrally adjudicated final diagnosis by 2 independent cardiologists (reference standard). The final diagnosis was based on all available information, including coronary angiography and echocardiography results, follow-up data, and serial measurements of sensitive cardiac troponin I, whereas adjudicators remained blinded to hs-cTnT.ResultsAmong 1,282 patients enrolled, acute myocardial infarction was the final diagnosis for 213 (16.6%) patients. Applying the hs-cTnT 0-hour/1-hour algorithm, 813 (63.4%) patients were classified as rule out, 184 (14.4%) were classified as rule in, and 285 (22.2%) were triaged to the observational zone. This resulted in a negative predictive value and sensitivity for acute myocardial infarction of 99.1% (95% confidence interval [CI] 98.2% to 99.7%) and 96.7% (95% CI 93.4% to 98.7%) in the rule-out zone (7 patients with false-negative results), a positive predictive value and specificity for acute myocardial infarction of 77.2% (95% CI 70.4% to 83.0%) and 96.1% (95% CI 94.7% to 97.2%) in the rule-in zone, and a prevalence of acute myocardial infarction of 22.5% in the observational zone.ConclusionThe hs-cTnT 0-hour/1-hour algorithm performs well for early rule-out and rule-in of acute myocardial infarction
The Liver Tumor Segmentation Benchmark (LiTS)
In this work, we report the set-up and results of the Liver Tumor
Segmentation Benchmark (LITS) organized in conjunction with the IEEE
International Symposium on Biomedical Imaging (ISBI) 2016 and International
Conference On Medical Image Computing Computer Assisted Intervention (MICCAI)
2017. Twenty four valid state-of-the-art liver and liver tumor segmentation
algorithms were applied to a set of 131 computed tomography (CT) volumes with
different types of tumor contrast levels (hyper-/hypo-intense), abnormalities
in tissues (metastasectomie) size and varying amount of lesions. The submitted
algorithms have been tested on 70 undisclosed volumes. The dataset is created
in collaboration with seven hospitals and research institutions and manually
reviewed by independent three radiologists. We found that not a single
algorithm performed best for liver and tumors. The best liver segmentation
algorithm achieved a Dice score of 0.96(MICCAI) whereas for tumor segmentation
the best algorithm evaluated at 0.67(ISBI) and 0.70(MICCAI). The LITS image
data and manual annotations continue to be publicly available through an online
evaluation system as an ongoing benchmarking resource.Comment: conferenc
Erratum to: 36th International Symposium on Intensive Care and Emergency Medicine
[This corrects the article DOI: 10.1186/s13054-016-1208-6.]
Retrospective evaluation of whole exome and genome mutation calls in 746 cancer samples
Funder: NCI U24CA211006Abstract: The Cancer Genome Atlas (TCGA) and International Cancer Genome Consortium (ICGC) curated consensus somatic mutation calls using whole exome sequencing (WES) and whole genome sequencing (WGS), respectively. Here, as part of the ICGC/TCGA Pan-Cancer Analysis of Whole Genomes (PCAWG) Consortium, which aggregated whole genome sequencing data from 2,658 cancers across 38 tumour types, we compare WES and WGS side-by-side from 746 TCGA samples, finding that ~80% of mutations overlap in covered exonic regions. We estimate that low variant allele fraction (VAF < 15%) and clonal heterogeneity contribute up to 68% of private WGS mutations and 71% of private WES mutations. We observe that ~30% of private WGS mutations trace to mutations identified by a single variant caller in WES consensus efforts. WGS captures both ~50% more variation in exonic regions and un-observed mutations in loci with variable GC-content. Together, our analysis highlights technological divergences between two reproducible somatic variant detection efforts
Profitable Portale durch prozessorientierte Content- und Kanalintegration – Beispiel Telekommunikation
Ab 2009 unter dem Titel "Marketing Review St. Gallen"Viele Unternehmen bauen ihren Internetauftritt zu einem MultikanalPortal aus, das neben den eigenen Produkten auch externe Zusatzservices integriert und so ein umfassendes Kundenbedürfnis befriedigt.
Den hierfür notwendigen Investitionen steht selten ein klar quantifizierbarer Nutzen gegenüber. Auch Telekommunikationsunternehmen sind mit dieser Herausforderung konfrontiert, verfügen jedoch über erlösgenerierende Kanäle für digitale Services (SMS, WAP etc.).
Das Beispiel E-Plus zeigt, dass sich durch die Integration von Content-Services zusammen mit einer gezielten Lenkung des Kunden die Nutzung der profitablen Kanäle erhöhen und so ein insgesamt rentables Ergebnis erzielen lässt
Der Lack als Werkstoff: Thema: Oberfläche, Lacke
Die Oberflächenbehandlung ist ein entscheidender Schritt in der Fertigung, da über sie die finalen Eigenschaften des Werkstücks erzeugt werden, sowohl in ästhetischer Sicht, als auch in funktioneller Hinsicht und der Langzeit-Beständigkeit. In der Fertigung spielt einerseits das komplexe Zusammenspiel zwischen den Materialeigenschaften des flüssigen Lackmaterials und des ausgehärteten Lackfilms und dem Beschichtungsprozess eine große Rolle. Andererseits wechselwirkt der Lack mit dem Grundwerkstoff, sodass bei den Fertigungsprozessen beides berücksichtigt werden muss. In diesem Beitrag soll dies an ein paar Beispielen, wie dem Zusammenhang der Beschichtung mit der Haftfestigkeit des Lackes, der Ausbildung der Oberflächenstruktur, der Korrosionsbeständigkeit und der zugehörigen Prüfmethodik dargestellt werden
- …