6 research outputs found
Selective Etching of Si versus Si<sub>1−x</sub>Ge<sub>x</sub> in Tetramethyl Ammonium Hydroxide Solutions with Surfactant
We investigated the selective etching of Si versus Si1−xGex with various Ge concentrations (x = 0.13, 0.21, 0.30, 0.44) in tetramethyl ammonium hydroxide (TMAH) solution. Our results show that the Si1−xGex with a higher Ge concentration was etched slower due to the reduction in the Si(Ge)–OH bond. Owing to the difference in the etching rate, Si was selectively etched in the Si0.7Ge0.3/Si/Si0.7Ge0.3 multi-layer. The etching rate of Si depends on the Si surface orientation, as TMAH is an anisotropic etchant. The (111) and (010) facets were formed in TMAH, when Si was laterally etched in the and directions in the multi-layer, respectively. We also investigated the effect of the addition of Triton X-100 in TMAH on the wet etching process. Our results confirmed that the presence of 0.1 vol% Triton reduced the roughness of the etched Si and Si1−xGex surfaces. Moreover, the addition of Triton to TMAH could change the facet formation from (010) to (011) during Si etching in the -direction. The facet change could reduce the lateral etching rate of Si and consequently reduce selectivity. The decrease in the layer thickness also reduced the lateral Si etching rate in the multi-layer
Laparoscopic cholecystectomy in a swine model using a novel near-infrared fluorescent IV dye (BL-760)
BACKGROUND AND OBJECTIVES: Bile duct injury during laparoscopic cholecystectomy has an incidence rate of 1%-2% and commonly appears under conditions of severe inflammation, adhesion, or unexpected anatomical variations. Despite the difficulties and rising concerns of identifying bile duct during surgeries, surgeons do not have a specific modality to identify bile duct except intraoperative cholangiography. While no biliary-specific fluorescent dye exists for clinical use, our team has previously described the development of a preclinical biliary-specific dye, BL-760. Here, we present our study of laparoscopic cholecystectomy using the fluorescent dye in a swine model. STUDY DESIGN/MATERIALS AND METHODS: With an approval from Institutional Animal Care and Use Committee, two 20-25 kg swine underwent laparoscopic abdominal surgery using a Food and Drug Administration-cleared fluorescent laparoscopic system. Images of the liver and gallbladder were taken both before and after intravenous injection of the novel fluorescent dye. The dye was dosed at 60 μg/kg and injected via the ear vein. The amount of time taken to visualize fluorescence in the biliary tract was measured. Fluorescent signal was observed after injection, and target-to-background ratio (TBR) of the biliary tract to surrounding cystic artery and liver parenchyma was measured. RESULTS: Biliary tract visualization under fluorescent laparoscopy was achieved within 5 min after the dye injection without any adverse effects. Cystic duct and extrahepatic duct were clearly visualized and identified with TBR values of 2.19 and 2.32, respectively, whereas no fluorescent signal was detected in liver. Cystic duct and artery were successfully ligated by an endoscopic clip applier with the visual assistance of highlighted biliary tract images. Laparoscopic cholecystectomy was completed within 30 min in each case without any complications. CONCLUSIONS: BL-760 is a novel preclinical fluorescent dye useful for intraoperative identification and visualization of biliary tract. Such fluorescent dye that is exclusively metabolized by liver and rapidly excreted into biliary tract would be beneficial for all types of hepato-biliary surgeries. With the validation of additional preclinical data, this novel dye has potential to be a valuable tool to prevent any iatrogenic biliary injuries and/or bile leaks during laparoscopic abdominal and liver surgeries
Association by Spatial Interpolation between Ozone Levels and Lung Function of Residents at an Industrial Complex in South Korea
Spatial interpolation is employed to improve exposure estimates and to assess adverse health effects associated with environmental risk factors. Since various studies have reported that high ozone (O3) concentrations can give rise to adverse effects on respiratory symptoms and lung function, we investigated the association between O3 levels and lung function using a variety of spatial interpolation techniques and evaluated how different methods for estimating exposure may influence health results for a cohort from an industrial complex (Gwangyang Bay) in South Korea in 2009. To estimate daily concentrations of O3 in each subject, four different methods were used, which include simple averaging, nearest neighbor, inverse distance weighting, and kriging. Also, to compare the association between O3 levels and lung function by age-groups, we explored ozone’s impacts on three age-related groups: children (9–14 years), adults (15–64 years), and the elderly (≥65 years). The overall change of effect size on lung function in each age group tended to show similar patterns for lag and methods for estimating exposure. A significant negative association was only observed between O3 levels and FVC and FEV1 for most of the lag and methods in children. The largest effect of O3 levels was found at the average for the lung function test day and last 2 days (0–2 days). In conclusions, the spatial interpolation methods may benefit in providing individual-level exposure with appropriate temporal resolution from ambient monitors. However, time-activity patterns of residents, monitoring site locations, methodological choices, and other factors should be considered to minimize exposure misclassification