82,999 research outputs found
Changes of Physico–Chemical Properties of Pig Slurry During Storage
This study was aimed to determine changes of the characteristics of raw pig slurry as liquid organic fertilizer at various storage times. A completely randomized design was used in this research. The treatments were storage times, i.e.: 0, 15, 30, 45, and 60 days. Variables observed were loss of the slurry, degree of acidity (pH), electrical conductivity (EC), total solid (TS), volatile solid (VS), total chemical oxygen demand (tCOD), soluble chemical oxygen demand (sCOD), total nitrogen (TN), ammonia-nitrogen (NH3-N), nitrate-nitrogen (NO3-N), total phosphate (TP), and dissolve reactive phosphate (DRP). The results showed that storage time significantly affected all the observed variables, except the concentration of NO3-N and total phosphate content. The pH, TS, VS, DRP, and losses of slurry lost during storage times increased, while EC, TN, NH3-N, tCOD, and sCOD decreased. Physico-chemical properties of slurry during storage times changed, as a result of organic matter breakdown
Time-derivative preconditioning for viscous flows
A time-derivative preconditioning algorithm that is effective over a wide range of flow conditions from inviscid to very diffusive flows and from low speed to supersonic flows was developed. This algorithm uses a viscous set of primary dependent variables to introduce well-conditioned eigenvalues and to avoid having a nonphysical time reversal for viscous flow. The resulting algorithm also provides a mechanism for controlling the inviscid and viscous time step parameters to be of order one for very diffusive flows, thereby ensuring rapid convergence at very viscous flows as well as for inviscid flows. Convergence capabilities are demonstrated through computation of a wide variety of problems
Scalable Task-Based Algorithm for Multiplication of Block-Rank-Sparse Matrices
A task-based formulation of Scalable Universal Matrix Multiplication
Algorithm (SUMMA), a popular algorithm for matrix multiplication (MM), is
applied to the multiplication of hierarchy-free, rank-structured matrices that
appear in the domain of quantum chemistry (QC). The novel features of our
formulation are: (1) concurrent scheduling of multiple SUMMA iterations, and
(2) fine-grained task-based composition. These features make it tolerant of the
load imbalance due to the irregular matrix structure and eliminate all
artifactual sources of global synchronization.Scalability of iterative
computation of square-root inverse of block-rank-sparse QC matrices is
demonstrated; for full-rank (dense) matrices the performance of our SUMMA
formulation usually exceeds that of the state-of-the-art dense MM
implementations (ScaLAPACK and Cyclops Tensor Framework).Comment: 8 pages, 6 figures, accepted to IA3 2015. arXiv admin note: text
overlap with arXiv:1504.0504
The effect of silicon on the glass forming ability of the Cu47Ti34Zr11Ni8 bulk metallic glass forming alloy during processing of composites
Composites of the Cu47Ti34Zr11Ni8 bulk metallic glass, reinforced with up to 30 vol % SiC particles are synthesized and characterized. Results based on x-ray diffraction, optical microscopy, scanning Auger microscopy, and differential scanning calorimetry (DSC) are presented. During processing of the composites, a TiC layer forms around the SiC particles and Si diffuses into the Cu47Ti34Zr11Ni8 matrix stabilizing the supercooled liquid against crystallization. The small Si addition between 0.5 and 1 at. % increases the attainable maximum thickness of glassy ingots from 4 mm for Cu–Ti–Zr–Ni alloys to 7 mm for Cu–Ti–Zr–Ni–Si alloys. DSC analyses show that neither the thermodynamics nor the kinetics of the alloy are affected significantly by the Si addition. This suggests that Si enhances the glass forming ability by chemically passivating impurities such as oxygen and carbon that cause heterogeneous nucleation in the melt
Microstructures and mechanical properties of tungsten wire/particle reinforced Zr57Nb5Al10Cu15.4Ni12.6 metallic glass matrix composites
Tungsten wire or particle reinforced metallic glass matrix composites are produced by infiltrating liquid Zr57Nb5Al10Cu15.4Ni12.6 (Vit106) into tungsten reinforcements at 1150 and at 1425 K. X-ray diffraction, differential scanning calorimetry, and scanning electron microscopy are carried out to characterize the composite. The matrix of the composite processed at 1150 K is mostly amorphous, with some embedded crystals. During processing, tungsten dissolves in the glass-forming melt and upon quenching precipitates over a relatively narrow zone near the interface between the tungsten and matrix. In the composites processed at 1425 K, tungsten dissolves in the melt and diffuses through the liquid medium, and then reprecipitates upon quenching. The faster kinetics at this high temperature results in a uniform distribution of the crystals throughout the matrix. Mechanical properties of the differently processed composites containing wires and particles are compared and discussed. The composites exhibit a plastic strain failure of up to 16% without sacrificing the high-failure strength, which is comparable to monolithic Vit106
Gauge Theories in and Fine-Lattice Deconstruction
The logarithmic energy dependence of gauge couplings in AdS_5 emerges almost
automatically when the theory is deconstructed on a coarse lattice. Here we
study the theory away from the coarse-lattice limit. While we cannot
analytically calculate individual KK masses for a fine lattice, we can
calculate the product of all non-zero masses. This allows us to write down the
gauge coupling at low energies for any lattice-spacing and curvature. As
expected, the leading log behaviour is corrected by power-law contributions,
suppressed by the curvature. We then turn to intermediate energies, and discuss
the gauge coupling and the gauge boson profile in perturbation theory around
the coarse-lattice limit.Comment: 17 pages, 1 figure, typos in listing version of abstract correcte
- …